APCE8670 - ACROMAG - IPC Station

Description

APCe8670: Non-intelligent carrier card
Acromag's APCe8670 carrier card interfaces a PMC mezzanine module to a PCI Express bus in a PC-based desktop computer system. The APCe8670 is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted PMC module. It simply acts as an adapter to route signals between the system's PCIe bus and the PMC module connectors. This card is a Peripheral Component Interconnect Express (PCIe) bus card carrier for a PMC module. The carrier card acts as an adapter to bridge between the PCIe bus of your PC and the PCI bus of a PMC module card. Access to PMC P4 rear I/O is provided through connector J6. PMC modules with front I/O can be accessed though the front mounting bracket. A cable is available to connect the J6 rear I/O to a front panel bracket mounted connector located in an adjacent slot.PCI Express carrier card for PMC modules

Part Number

APCE8670

Price

Request Quote

Manufacturer

ACROMAG

Lead Time

Request Quote

Category

Embedded I/O & Processors » PCIe Carrier Boards

Specifications

Categorization Information

Embedded I/O & Processors
PCI Express Products
PCIe Carrier Boards
PCI Express Carrier Cards for PMC Modules

Features

One PMC module slot
4-lane PCI Express interface
PCI-X interface supports 32/64-bit addressing, 32/64-bit data bus at up to 100MHz operation
Carrier routes 32 differential pairs to rear connector for LVDS I/O from the PMC module
JTAG connector supports Xilinx programmer for use with hosted FPGA modules
Cooling fan
Auxilliary power connection for 12V source
Diagnostic LEDs indicate communication speed
Holds one PMC module

Datasheet

APCe8670_PCI_Express_Carrier_Card_for_PMC.pdf

659 KiB

Download

Extracted Text

PMC/XMC Module Carriers APCe8670 PCI Express Carrier Card for PMC Modules JP1 P4 JP2 J5 DIAGNOSTIC LEDS POWER JTAG I/O AUX POWER SOURCE JTAG VOLTAGE (PCIe GRAPHICS) SELECT SELECT J1 J2 P3 J6 FAN PMC PMC POWER PCI-X PCI-X DC-DC BUS BUS CONVERT BOARD -TO- J3 J4 BOARD SCSI-3 CONNECTOR PMC PMC BRIDGE PCI-X REAR BUS I/O P1 PCIe x4 EDGE CONNECTOR One PMC mezzanine module slot ◆ Non-Intelligent carrier card ◆ PCIe x4 interface The I/O signals are accessible via rear connectors Description Key Features & Benefits and though the front mounting bracket. Cables Acromag’s APCe8670 carrier card interfaces a ■ One PMC module slot are available to connect the carrier’s rear I/O to a PMC mezzanine module to a PCI Express bus in a ■ 4-lane PCI Express interface front panel connector in an adjacent slot. PC-based desktop computer system. ■ PCI-X interface supports 32/64-bit addressing, Select PMC modules from Acromag’s offering The APCe8670 is a PCIe bus adapter board that 32/64-bit data bus at up to 100MHz operation of high-performance FPGA and I/O solutions allows a PC (PCIe bus master) to control and or use any third-party ANSI/VITA 20 compliant communicate with the hosted PMC module. ■ Carrier routes 32 differential pairs to rear mezzanine modules. It simply acts as an adapter to route signals connector for LVDS I/O from the PMC module between the system’s PCIe bus and the PMC ■ JTAG connector supports Xilinx programmer module connectors. for use with hosted FPGA modules ■ Cooling fan Aux JTAG ■ Auxilliary power connection for 12V source Diagnostic LEDs Power Fan Power PMC ■ Diagnostic LEDs indicate communication speed Internal SCSI Bridge DC-DC PCIe PCI-x Converter X4 ■ ■ ■ ■ Tel 248-295-0310 Fax 248-624-9234 solutions@acromag.com www.acromag.com 30765 Wixom Rd, Wixom, MI 48393 USA Bulletin #8400-746g PMC/XMC Module Carriers APCe8670 PCI Express Carrier Card for PMC Modules ■ Environmental Performance Specifications Ordering Information Operating temperature 0 to 70°C. ■ PMC Compliance Carrier Cards Storage temperature PMC Module APCe8670 -55 to 125°C. Conforms to CMC/PMC Specification, P1386.1. PCI Express carrier card for PMC modules Relative humidity 5 to 95% non-condensing. ■ PCI/X Bridge Accessories Power The carrier provides +3.3V, +5V, +12V and -12V Compliant to the following specifications: 5025-913 power to the PMC module. The +12V power source PCI Express Base Specification (Rev. 1.1) CS Electronics internal SCSI cable with PCI bracket- is jumper-selectable from the PCIe bus +12V supply or PCI Express-to-PCI/PCI-X Bridge Specification (Rev. 1.0) mounted HD68 female connector. Brings the PMC J4 the PCIe graphics power connector. DC/DC converters PCI-to-PCI Bridge Specification (Rev. 1.2) rear I/O signals to back panel of the PC. generate a +5V or -12V supply from the +12V source. PCI Local Bus Specification (Rev. 3.0) PCI-X Addendum to PCI Local Bus Specification +3.3V (±10%): 0mA. (Rev. 2.0, mode 1 only) +12V (±5%): ??mA, typical with fan operating. PCI Bus Power Management Interface Specification Currents specified are for the carrier board only. For (Rev. 1.2) the total current required from each supply, add the Addressing PMC module currents. 32/64-bit. MTBF Data bus Contact the factory. 32/64-bit. ■ Physical Interface PMC Modules Supports up to 100MHz operation. Dimensions See www.acromag.com for more information. Length: 9.342 inches (237.3 mm). Height: 4.376 inches (111.2 mm). ■ PCI Express Interface Width: Occupies two slots with fan installed (fan is PCI Express interface mounted on solder side, height is 10 mm). Occupies 4 lane, Gen 1 capable. one slot with fan removed. PCIe bus compliance Board thickness: 0.062 inches (1.59 mm). This device meets or exceeds all written PCI Express Connectors specifications per revision 1.1 dated March 28, 2005. J1, J2, J3: PMC PCI-X signals. J4 : PMC user signals (rear I/O). ■ I/O Interface J5: Auxiliary power connector (PCIe graphics). Rear I/O (J6) J6: Board-to-board connection of J4 user signals. Connector: MD68 (internal SCSI), male. JP1: Power source select jumper. 32 LVDS pairs routed from the PMC P4 connector. JP2: JTAG I/O voltage select jumper. P1: PCI Express V1.1 x4 lanes card edge. P3: Fan power. P4: JTAG (Xilinx programming adapter). ■ ■ ■ ■ Tel 248-295-0310 Fax 248-624-9234 solutions@acromag.com www.acromag.com 30765 Wixom Rd, Wixom, MI 48393 USA All trademarks are property of their respective owners. Copyright © Acromag, Inc. 2017. Data subject to change without notice. Printed in USA 10/2017.

Frequently asked questions

IPC Station' parent company, GID Industrial, specializes in procuring industrial parts. We have years of experience finding rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. It is possible for some parts to be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have our own accounts, but we can also use yours if you would prefer. However, we can use other carriers if it will be more convenient for you.

IPC Station will definitely serve you. In fact, much of our business is international, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by IPC Station. We can also accept wire transfers and PayPal, or a check if you're in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products