NEXCOM ICEB 8060

COM Express Carrier Board, Type 6 pin-out, PICMG COM.0 Rev. 2.0 3DDI/ ICEB 8060 4 USB3.0/2 SATA 3.0/PCIe Gen 3.0, Bootable CFAST/Mini-SATA Main F Main Features eatures Mini-SATA Œ COM Express COM.0, Rev 2.0 Evaluation CRB, ATX form-factor Œ PCIex16, DDI (PCIex16), PCIex4, PCIex1 and Mini-PCIe for Wi-Fi Œ Support Type 6 pin-out, COMe Extended/Basic/Compact Module Œ VGA/RS232/422/485/5COM, Dual GbE/12USB/5.1, S/PDIF Œ Display: 3 x DDI (2DP/HDMI), VGA & dual channels 18/24-bit LVDS Œ 4 x USB3.0/2 x SATA3.0, PCIe Gen 3.0, Bootable CFAST or Product Overview NEXCOM ICEB 8060 is a Carrier CRB of COM Express type 6, pin-out defined by PICMG, COM.0 Rev. 2.0 specification with ATX form-factor. NEXCOM in-house designed features with bootable CFAST/SATA or Mini-SATA/SATA via Mini-PCIe slot (half-/full-size slot) as well as advanced 2 x SATA3.0 interfaces. ICEB 8060 support added-on card slots of1 x PCIex16 (up to PCIe Gen 3.0), 1 x DDI (SDVO/HDMI/DVI/DP by PCIex16 slot) 1 x PCIex4, 1 x PCIex1 and 1 x Mini-PCIe slots. Onboard Super I/O ITE8783 may support up to 6 x COM including COM2 defined by RS232/422/485 on edge I/O connector. Additional ® 2nd GbE LAN supported by Intel 82574L and up to 4 x USB3.0 external devices interfaces, up to 2 x SATA 3.0 internal devices interfaces to support ® most- updated CPU technology from Intel 3rd generation Core™ i7/i5/i3 of Ivy bridge-Mbl + ECC onto NEXCOM Computer-On-Module ICES 668 family together. Specifications Form factor - 5 x internal box-header 2.0 pitch to support RS232 Œ ATX Carrier MB, dimension: 305mm x 244mm (12" x 9.6") Œ USB: 12 ports 4 x USB3.0 and 8 x USB2.0 ports Œ COM Express Evaluation CRB: PICMB COM Express board-to-board - 4 x USB3.0/4 x USB2.0 ports by stack Type A on edge interconnectors, type 6 pin-put, female, 8mm stack-up height, - 3 x USB2.0 by 4-pins JST 2.0mm JST connector, COM.0 Rev. 2.0 - 1 x internal USB2.0 to Mini-PCIe slot for external wi-fi module Œ NEXCOM Computer-On-Modules Support List: Œ SATA: 4 ports Œ Basic Size (125 x 95mm) : ICES 668 - 2 x SATA 3.0 ports - 1 x Mini-SATA by Mini-PCIe slot for half-/full size Mini-SATA/SSD Expansion - 1 x CFAST slot for CFAST/SATA 2.0 Œ 1 x PCIex16 slot, support PEG interfaces Œ PS/2: internal 2 x 4-pins header for Keyboard/Mouse Œ 1 x DDI (SDVO/HDMI/DP by orange color PCIex16 slot) Œ GPIO ports: 2 x + 8 x pins GPIO signals from COMe (default 5V TTL/ Œ 1 x PCIex4 slot, optional 4 x PCIex1 signals option 3.3V) Œ 1 x PCIex1 slot and 1 x Mini-PCIe slot for Wi-Fi with SIM tray Network Graphic Interfaces Œ ETH0: LAN port Connected from COMe CPU module (ICES 668) Œ Graphic Chip: from Type 6 pin-out, COM Express module Œ ETH0: Support 1 x RJ45/GbE LAN port on the edge I/O Œ CRT: support analog VGA with DB15 connector on the I/O edge ® Œ ETH1: Support 2nd RJ45/GbE LAN port by Intel 82574L on the edge Œ LVDS: dual channels 18/24-bit LVDS connector (dual DF-13-20P) I/O Œ DDI (in PCIex16): optional EBK-A2HDMI riser card for HDMI or DP Œ ETH0 and ETH1 support Boot from LAN (PXE) Super I/O Œ ETH0 and ETH1 support Wake-on-LAN (when +5Vsb power available) Œ ITE8783 Audio I/O Interface Œ HD Audio AL886 with 5.1 channels Œ Serial COM: 6 ports Œ Support external S/PDIF interface - 1 x edge DB9 connector to support RS232/422/485 Œ Support internal pin-header for L/R speaker-out 2W/ 4 Ohm (+5/+12V by Ring) Œ Onboard buzzer COM Express COM Express connector C and D COM Express connector A and B www.nexcom.com Block Diagram SATA X 2 SATA x2 BUS R/G/B VGA Connector DB-15 rear IO DDI1 DDI1 (PEGx16 SLOT) Connector mSATA X1 SATA x1 BUS DDI2 Connector DDI2 (Display port rear IO connector) LVDS Channel A LVDS A (18/24 bit) DDI3 CFAST X1 SATA x1 BUS DDI3 (Display port rear Connector Connector IO connector) SPEAKER USB 2.0 X 2 USB3.0 X 4 USB2.0 BUS PIN USB3.0 BUS LVDS Channel B Rear IO connector LVDS B(18/24 bit) HEARD Pin Header Connector USB2.0 BUS USB 2.0 X 4 PCI-E x1 BUS (rear IO) PCIEX1 (LAN2) USB2.0 BUS Giga LAN USB 2.0 X 1 Audio Codec HD Audio interface Rear IO connector (box header) chip AMP (ALC886) PCI-E x1 BUS PCI-E x1 PCI-E x4 SLOT X1 PCI-E x4 BUS SLOT X1 x16 PEG BUS Audio Rear IO Connector PEG x16 PCI-E x1 PCI-E x1 BUS Line IN / Line OUT / SLOT X1 SLOT X1 MIC IN/ CEN OUT / Line OUT WIFI/3G SIDE OUT / SPDIF PCI-E x1 BUS MiniPCIE X1SLOT I2C BUS USB 2.0 X 1 EEPROM USB2.0 BUS KB/MS Pin Header GPIO BUS GPI *4 COM 2 GPO *4 RS232/422/485 TTL LEVLE rear IO Connector SUPER I/O LPC BUS IT8783E/AX-L COM 1,3~6 Giga LAN RJ45 TYPE 6 TYPE 6 RS232 Rear IO Connector box header X5 EEPROM Ordering Information Œ 1 x 2K EEPROM to record PCI Express Lane configuration Œ ATMEL AT24C32 (or C02) and address 0 x 57 or (0 x AE) Œ ICEB 8060 (P/N: 10KB0806000X0) RoHS Compliant COM Express Type 6, COM.0 Rev. 2.0 Evaluation CRB, 3DDI/VGA/LV Watchdog Timer DS/4USB3.0/8USB2.0/6COM/2GbE/5.1 HD, SPDIF/2SATA3.0/mSATA/ Œ Watchdog timeout can be programmable by Software from 1 second CFAST/PCIex16/PCIex4/PCIex1/mPCIe, ATX power input to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% temperature 25°C) On-board RTC Œ On-chip RTC with battery BR2032 Power Input Œ Standard ATX 24 pins and AUX 4-pins with 12V Dimensions Œ ATX form factor, 305 x 244mm (Lx W, 12”x9.6”) Environment Œ Operating temperatures: -20°C to 60°C Œ Storage temperature: -40°C to 85°C Œ Relative humidity: Operating 10% to 90%, non-condensing Certifications Œ CE approval Œ FCC Class A COM Express We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 02/10/2015