Section 1_2-51 4/7/04 9:19 AM Page 51 Order Information ■ Ripac Rack-Mount System For CompactPCI 13U, 21 Slot With RiCool Hot-Swap Blowers, With RTMs For 1800W systems. With air-plenum for full cooling redundancy 2400W, with air-intake filter Order No. U 12 (6 + 3 + 3) Side panel Rear internal wiring space (mm) For PCB For cPCI depth (mm) 379.9 85.5 6U x 160 mm 9808544 6U x 80 RTMs Mechanical Supply Includes Item Description Material Quantity Page 1 Ripac subrack system Aluminum, clear chromated 1 146 2 EMC gaskets Stainless steel Various 100 3 Covers 1 mm aluminum, clear chromated 2 188-191 4 Guide rails gray/yellow, keyable Polycarbonate UL 94-V0 40 57 5 Guide rails red (CPU), keyable Polycarbonate 2 57 6 7 Guide rails gray/yellow (RTMs), keyable Polycarbonate UL 94-V0 42 57 8 ESD clips for PCB ESD wipe Stainless steel 42 57 9Front panel hinged for RiCool access 2.5 mm aluminum, clear chromated 1 10 Front panel for air-intake/filter access 1 mm aluminum, clear chromated 1 11 Air filter, front removable Quadrafoam UL 94 1 12 Rear panel with IEC AC connector 1 mm aluminum, clear chromated 1 Electrical Supply Includes Electrical specifications 13 CompactPCI backplane 6.5U x 21 slot See PICMG 2.0/2.1 1 73 14 15 RiCool blowers 12 V or 24 V or 48 V optional 48W, 110 cfm each 4 222 static pressure 1.6" H2O 16 IEC AC socket with line filter 30A (VDE, UL, CSA) 1 17 Power supply 4 x 1U x 28HP AC or DC 600W 4 146 18 19 AC cable harness ✳ DC available upon request A 13U x 84HP integrated subrack that accepts up to 21 Slot, 6U x 160 mm, 64 or 32 Bit cPCI boards and up to four 1U power supplies to form a complete CompactPCI system. A NEBS compatible system for use in telecommunication or telephony applications. It is designed for applications requiring very high airflow in a fail-safe environment with 80 mm transition boards. Ripac Rack-Mounted System For CompactPCI 4U, 8 slots 50 Section 1_2-51 4/7/04 9:19 AM Page 52 Order Information ■ Ripac Rack-Mount System For CompactPCI 13U, 21 Slot With RiCool Blowers, With RTMs ■ ■ For alternative PSU backplanes, ■ For system thermal evaluation tools, Technical Description: Options To Be Considered: see pages 88-91 see page 54 Vented system, 379.9 mm deep, for ■ For alternative cPCI backplanes, installation in 19" (486.2 mm) racks, see pages 73-78 ■ For power supplies, see page 91 ■ For EMC filler panels, cabinets or cases see pages 208-209 ■ For bridges, see page 83 ■ For DC power entry module, Prepared to accommodate see page 92 ■ For front panels and injector/extractor ■ For alternative cPCI/H.110 CompactPCI boards and drives. handles, see page 98 ■ For alarm board, see pages 93-94 backplanes, see pages 74-95 ■ For 30A RTM ground contacts, Complies with IEC 60297-3/ -4/ -5-1xx; ■ For hard disk drive modules, ■ For alternative PICMG 2.16 fabric see page 58 IEEE 1101.1/.10/.11 see page 95 backplanes, see page 78 ■ For alternative PICMG 2.17 star ■ For RiCool blowers, fabric backplanes, see page 76 see pages 222-225 Features 12U Prepared for the installation of 21 x 6U x 160 mm cPCI front boards • and 21 x 6U x 80 mm RTMs For the optional installation of drives and pluggable PSUs • 6U x 8HP AC or DC power supplies, 2 x 350W included • Front/rear interface for CompactPCI defined injector/extractor handles • Keyable PCB guide/slot positions per PICMG 2.10 • Red guides for the system slot • Green guides for the PSU slot • Gray/yellow guides for peripheral slot identification • ESD clips for PCB ESD wipe • Modification Service: Optional ESD clips for front panel ESD protection Modifications or custom solutions are Optional 30A GND sockets for RTM protection available. The Kaparel/Rittal system specialists will assist you with Front/rear cooling • planning and configuration. EMC design • Forced air cooling with intelligent, hot-swap RiCool blowers • Fully wired and tested • 51