482.6 AdvancedTCA AdvancedTCA shelf HS1, 5 U, 6 slots, horizontal, DC version HE = U 3D heat simulation Due to its compact design, the Benefits at a glance: Technical specifications: Supply includes: 5 U shelf version offers optimum ● Conforms to PICMG 3.0 ● 19″, 5 U, 440 mm deep 1 rack-mount system 482.6 mm application possibilities, e.g. as rev. 2.0 ● 6 slots (horizontal) at the front, (19″), 5 U, 440 mm deep, a test or development system, ● Hot swap-compatible fan units including 2 switch slots with 2 fan units each with 7 fans, wherever high performance and ● Specified heat loss of at least RTM 1 backplane, 6 slots, a space-saving design is 200 W/board ● 5 slots (horizontal), RTM 1 ShMC Pigeon Point 500 or required. ● System monitoring using Shelf ● Cooling of up to 200 W/slot Intel WT, Management Controllers (front area) 2 PEM 50 A. B (ShMC) ● Cooling of up to 30 W/RTM ● Plug & play-compatible for ● Hot-swap fan unit Accessories: ShMC, Intel WT or PP 500 ● Pull-out filter 3.1 ● Fully assembled, wired and ● Including 1 Shelf Manage- Shelf Management Controller, ATCA face plate kit, function tested ment Controller (ShMC) Pigeon Point 500 or Intel WT see page 491. ● Full Mesh backplane (repli- cated Mesh) or Dual Star ● DC PEM 50 A with filter and controller Standard AdvancedTCA Shelf HS1 (ShMC connectable from the front), available off the shelf Shelf U Slots Backplane IPMI ShMC Switch Slots PEM Model No. RP HS1 5 6 Dual Star Bus topology Pigeon Point 500 1 + 2 2 x 50 A 9911.715 HS1 5 6 Full Mesh Bus topology Pigeon Point 500 1 + 2 2 x 50 A 9911.717 HS1 5 6 Dual Star Bus topology Intel WT 1 + 2 2 x 50 A 9911.716 HS1 5 6 Full Mesh Bus topology Intel WT 1 + 2 2 x 50 A 9911.718 Example of possible customised applications available on request 2 x DC power ShMC/ System 2 x connection ShMC/ Backplane Backplane Version U Pigeon Point Filler panel Fan unit enclosures DC PEM 50 A with 50 A fuse Intel WT Full Mesh Dual Star 500 switch 15 � � – � – � 1 � – 25 � � – � – � 1– � 35 � � –– � � 1 � – 45 � � –– � � 1– � 55 � – � � –– 2 � – 65 � – � � – � 1 � – 75 � – � � –– 2 – � 85 � – � � – � 1– � 95 � – � – � –2 � – 10 5 � – � – � � 1 � – 11 5 � – � – � –2– � 12 5 � – � – � � 1– � � Included with the supply. Note: The ATCA systems are based on standard components which may be individually combined in accordance with a modular principle. The above matrix provides an overview of additional installation vari- ants based on the described systems which may be implemented in a short lead time. Rittal Catalogue 32/Electronic Packaging 489 440 5 HE AdvancedTCA