Embedded Computers/3.5" - 5.25" SBCs


Why buy from GID?


We are industry veterans who take pride in our work


Avoid the dangers of risky trading in the gray market


Our network of suppliers is ready and at your disposal


Maintain legacy systems to prevent costly downtime


Time is of the essence, and we are respectful of yours


Part Number EBC 356
Manufacturer NEXCOM
Category Embedded Computers »  3.5" / 5.25" SBCs
Price Request Quote
Lead Time Request Quote


3.5" SBC with 4 core/2 core Intel® Pentium®/Celeron® Processors N3000 SoC Support DDR3L/M.2 module/4 x USB 3.0/2 x SATA 3.0/3 x HDMI interfaces
EBC 356 is a 3.5" SBC embedded board equipped with Intel® Pentium®/Celeron® Processors N3000 product family to provide a high performance with lower power consumption structure for any application, which supports DDR3L 1600 memory, along with integrated Intel® Gen. 8 Graphics Engine enhanced Gfx & video, and support DX 11*. EBC 356 also provides two SATA 3.0, four USB 3.0 ports, one M.2 interfaces, and supports triple HDMI outputs.

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Our Process

Our Process: Preparation

Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.

Our Process: Receiving

Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.

Our Process: Initial Testing
Initial Testing

Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.

Our Process: Refurbishment

Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.

Our Process: Repair

Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.

Our Process: Final Testing
Final Testing

Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.

Our Process: Shipping

After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.

Who We Are

IPC Station is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.

Do you need an EBC 356? We can help you find it at a competitive price!


CPU Support Support Intel® Pentium®/Celeron® Processors N3000 product family
Main Memory Dual 204-pin SO-DIMM socket supports up to 8 GB DDR3L 1600 MHz SDRAM
Plug and play support
Advanced power management and advanced configuration & power interface support
Display Integrated Intel® Gen. 8 Graphics Engine
Supports HDMI interface
3 x HDMI connector
2 of 3 HDMI resolutions support 4K/2K,(3840x2160 @ 30Hz, 2560 x 1600 @ 60Hz)
1 support 2K (2560x1440 @ 60Hz)
Audio Realtek ALC886 CODEC for high definition:
1 x 4 pin pin-header for mic -in
1x 4 pin-header for line out
1x 5 pin header for speak out
On-board LAN 1 x Intel® i210 Gigabit Ethernet
Support PXE boot from LAN, wake on LAN function
Expansion 1 x M.2 slot, for an optional 3G/4G or M.2 SSD module
I/O Interface Series port: 2 ports
COM1/2: RS232 1 x10 pin JST connector
8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL level (0/5V)
One 4-pin FAN connector
One 3 pin header for AT/ATX mode
One 6 pin header for PS2 keyboard & mouse
One 4 pin header for power/storage LED
Onboard buzzer/SMBus2.0/reset SW/on & off switch button
Edge I/O Interface 3 x HDMI connector
2 x dual stack USB3.0 connector
1 x RJ45 with LED connector
Watchdog Timer Watchdog time-out can be programmable by software from 1 second to 255 seconds and from 1 minute to 255 minutes (tolerance 15% under room temperature 25°C)
Storage 2 x SATA 3.0 ports
System Monitor Monitoring of 4 voltages and 2 temperatures
4 voltage (Vcore, +12V, +3.3V, 5V)
2 temperatures (CPU, system)
1 fan speed detection
On-board RTC On-chip RTC with battery backup
1 x external Li-ion battery
Power Requirements Power requirement: +12V DC Input
One 4-pin power connector
Dimensions 146mm (L) x 102mm (W) 5.7" x 4.0"
Environment Board Level Operating temperatures: -20°C to 60°C
Storage temperatures: -25°C to 85°C
Relative humidity: 10% to 90% (operating, non-condensing)5% to 95% (non-operating, non-condensing)
Certifications Meet CE
FCC Class A
Categorization Information IoT Automation Solutions
Embedded Computing
3.5" / 5.25" SBC


  • On-board Intel® Pentium®/Celeron® Processors N3000 product family (codename Braswell)
  • Supports dual channel DDR3L 1600MHz, 2 x SO-DIMM, up to 8GB system memory
  • 3 x HDMI connector, 2 of 3 HDMI resolution support 4K/2K
  • 2 x SATA 3.0/ 4 x USB 3.0/M.2 module/ 4-in & 4-out GPIO, Mic-in, Speak out
  • Support AT/ATX mode and single +12VDC input

Related Products

3.5" ECX on-board Intel® Atom™ D525 1.8GHz CPU The EBC 352 is a PCI 104 3.5...
3.5" SBC On-board Intel® Atom™ Processor D2550 1.86GHz with 24 bit LVDS/Gig...
3.5" SBC On-board Intel® Atom™ Processor D2550 1.86GHz with 24-bit LVDS/Gig...
3.5" SBC On-board Intel® Atom™ processor D2550 1.86GHz with 24-bit LVDS & 2...
3.5" SBC On-board Intel® Atom™ Processor E3800 Product Family HDMI/ VGA/ 1x...
3.5" ECX On-board Intel® Atom™ Processor E3800 Product Family HDMI/VGA/1 x2...


Any product names, logos, brands, and other trademarks or media featured or referred to on IPC Station are the property of their respective owners.

GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.

All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.

IPC Station is a GID Industrial website.
GID Industrial Logo
Copyright © 2023 GID Holdings LLC, All Rights Reserved.
Page generated in 0.072 seconds.