NEXCOM EBC 354

Description
3.5" SBC On-board Intel® Atom™ Processor D2550 1.86GHz with 24-bit LVDS/Gigabit LAN, Dual mini-PCIe
The EBC 354 is a 3.5" SBC embedded board with an on-board Intel® Atom™ processor D2550 1.86GHz CPU with 1MB L2 cache, which supports DDR3 800/1066 memory, along with integrated SGX545 PowerVR Core @ 400/640 MHz Enhanced Gfx & Video, support DX*10.1, OpenGL 3.0, Full HD decode (MPEG2, VC1, AVC, H.264), along with integrated graphics for large display applications to support multiple displays. Intel® NM10 Express chipset provides two SATA, four serial ports, six USB 2.0 ports, two Gigabit Ethernet LAN port, two Mini-PCIe interface for application. Able to support matrixdisplays with rich I/O, the EBC 354 is a great solution featuring a low power consumption and small footprint for multi-media applications.
Part Number
EBC 354
Price
Request Quote
Manufacturer
NEXCOM
Lead Time
Request Quote
Category
Embedded Computers » 3.5" / 5.25" SBCs
Specifications
CPU Support
Intel® Atom™ processor D2550 1.86GHz CPU
Main Memory
One 204-pin SO-DIMM socket supports up to 4 GB DDR3 800/1066 MHz SDRAM
Chipset
Intel® NM10 Express chipset
BIOS
AMI BIOS
Plug & Play support
Advanced power management
Advanced configuration & power interface
8M bits SPI ROM
On-board LAN
2x Intel® PCI Express Gigabit Ethernet
Support boot from LAN (PXE)
2x RJ45 with LED
Display
Intel® Atom™ processor D2550 integrated 3D graphics engine, which enhances Gfx & video, support DX*10.1, OpenGL 3.0, and Full HD decode (MPEG2,VC1,AVC,H.264), delivers sophisticate dgraphics for large display applications, supports dual independent displays at graphics base frequency up to 640MHz, and provides multi-options for high-resolution displays
DVI interface:1 x DVI-I connectorResolution up to 1920x1200
HDMI interface:1 x HDMI connectorResolution up to 1920x1200
LVDS interface:Single (24bit) LVDS panel, resolution up to 1440 x 900 DF13 20-pinLVDS connector for internal connection
CCFL interface:1 x CCFL for LCD Panel Backlight Inverter
Audio
Realtek ALC886 CODEC for High Definition
1 x Mic-in and 1 x Line-out Pin header
Expansion
2 x Mini-PCIe
I/O Interface
Serial port: 4 portCOM1, 3, 4 support RS232 with 10-pin box headerCOM2 support RS232/422/485 with 10-pin box header
USB 2.0: 6 ports4 ports edge connector2 ports by 2.0mm JST connector
8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5 V)
On-board power LED and HDD active LED pin header
1x 3-pin fan connector (for CPU)
1x keyboard/ mouse pin header
On-board buzzer/ SMBus2.0/ reset SW/ on & off switch button
Edge I/O Interface
1x DVI-I connector
1x HDMI connector
2x dual stack USB connector
2x RJ45 with LED connector
Watchdog Timer
Watchdog timeout can be programmable by software from 1 second to 255 seconds and from 1 minute to 255 minutes (tolerance 15% under room temperature 25°C)
Storage
2x SATA port
System Monitor
Monitoring of 4 voltages and 2 temperatures
4 voltage (Vcore, +12V, +3.3V, 5V)
2 temperatures (CPU, system)
1 fan speed detection
On-board RTC
On-chip RTC with battery backup
1x external Li-Ion battery
Power Input
Support AT and ATX mode
Power Requirements
Power requirement: +12V DC Input
One 4-pin power connector
Dimensions
3.5" SBC form factor/ 146mm (L) x 105mm (W) (5.7" x 4.1")
Environment
Operating temperature: -15°C to 60°C
Storage temperature: -20°C to 85°C
Relative humidity: operating 10% to 90%, non-condensing
Certifications
CE approval
FCC Class A
Categorization Information
IoT Automation Solutions
Embedded Computing
3.5" / 5.25" SBC
Features
- On-board Intel® Atom™ processor D2550 1.86GHz CPU
- Intel® NM10 Express chipset
- One 204-pin SO-DIMM socket supports up to 4 GB DDR3 800/1066 MHz SDRAM
- Display: DVI-I & HDMI & LVDS (1x DF13 20-pin 18/24-bit Single channel)
- 2x Mini-PCIe
- 2x Intel® 82574L PCI Express Gigabit Ethernet
- 2x SATA
- 6x USB, 4-in/4-out GPIO, Mic-in, Speak out
- Serial port: 3x RS232, 1x RS232/422/485 port
- Support AT/ATX mode and single +12 Vdc input
Datasheet
Extracted Text
® 3.5" SBC On-board Intel Atom™ Processor D2550 1.86GHz with EBC 354 24-bit LVDS/Gigabit LAN, Dual Mini-PCIe Main F Main Features eatures ® 2 x Mini-PCIe On-board Intel Atom™ processor D2550 1.86GHz CPU ® ® 2 x Intel 82574L PCI Express Gigabit Ethernet Intel NM10 Express chipset 2 x SATA One 204-pin SO-DIMM socket supports up to 4 GB DDR3 6 x USB, 4-in/4-out GPIO, Mic-in , Speak out 800/1066 MHz SDRAM Serial port: 3 x RS232, 1 x RS232/422/485 port Display: DVI-I & HDMI & LVDS (1 x DF13 20-pin 18/24-bit Single Support AT/ATX mode and single +12VDC input channel) Product Overview ® The EBC 354 is a 3.5" SBC embedded board with an on-board Intel Atom™ processor D2550 1.86GHz CPU with 1MB L2 cache, which supports DDR3 800/1066 memory, along with integrated SGX545 PowerVR Core @ 400/640 MHz Enhanced Gfx & Video, support DX*10.1, OpenGL 3.0, Full HD decode ® (MPEG2, VC1, AVC, H.264), along with integrated graphics for large display applications to support multiple displays. Intel NM10 Express chipset provides two SATA, four serial ports, six USB2.0 ports, two Gigabit Ethernet LAN port, two Mini-PCIe interface for application. Able to support matrix-displays with rich I/O, the EBC 354 is a great solution featuring a low power consumption and small footprint for multi-media applications. Specifications DVI interface: CPU Support ® 1 x DVI-I connector Intel Atom™ processor D2550 1.86GHz CPU Resolution up to 1920 x 1200 Main Memory HDMI interface: One 204-pin SO-DIMM socket supports up to 4 GB DDR3 1 x HDMI connector 800/1066 MHz SDRAM Resolution up to 1920 x 1200 LVDS interface: Chipset ® Single (24bit) LVDS panel, resolution up to 1440 x 900 DF13 20-pin Intel NM10 Express chipset LVDS connector for internal connection BIOS CCFL interface: AMI BIOS 1 x CCFL for LCD Panel Backlight Inverter Plug & Play support Audio Advanced power management Realtek ALC886 CODEC for High Definition Advanced configuration & power interface 1 x Mic-in and 1 x Line-out Pin header 8M bits SPI ROM Expansion On-board LAN ® 2 x Mini-PCIe 2 x Intel PCI Express Gigabit Ethernet Support boot from LAN (PXE) I/O Interface 2 x RJ45 with LED Serial port: 4 port COM1, 3, 4 support RS232 with 10-pin box header Display ® COM2 support RS232/422/485 with 10-pin box header Intel Atom™ processor D2550 integrated 3D graphics engine, which USB 2.0: 6 ports enhances Gfx & video, support DX*10.1, OpenGL 3.0 , and Full HD 4 ports edge connector decode (MPEG2,VC1,AVC,H.264), delivers sophisticated graphics for 2 ports by 2.0mm JST connector large display applications, supports dual independent displays at 8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5V) graphics base frequency up to 640MHz, and provides multi-options On-board power LED and HDD active LED pin header for high-resolution displays 3.5" CPU Boards www.nexcom.com Block Diagram HDMI CON Page 12 CK505 DVI CLOCK GEN Page 6 DDI PORT1 DDI PORT0 DVI-I CON Page 16 CedarView Dual Core CPU DX10.1 Graphics DDR3 SO-DIMM DDR3 1 Slot Page 11 DDR3-800/1066 LVDS CON LVDS Page 14 559 balls 22*22mm Page 7-10 HDA_SDI1 DMI x4 DMI SPI 2MB Page 21 4 Lanes 2GB/s 0-1 - Rear Page 23 RJ45 LAN 82574L DMI SPI 2-3- Rear PCIe x1 Giga LAN Page 26 Page 25 Page 23 USB 2.0 Tiger Point LAN 82574L RJ45 PCIe x1 Giga LAN 4-5 - internal Page 27 PCH NM10 Page 28 Page 23 Mini PCIE PCIe x1 6-7 - Mini Card Page 29 360 balls WIFI Page 29 30 Mini PCIE PCIe x1 17*17mm Page 30 SATA0 HDD 3G SATA Gen2 Page 18-20 Page 24 SATA1 DOM SATA Gen2 HDA LC I LPC Page 24 LPC Bus COM1/3/4 Audio Codec RS-232 Page 32 MIC-IN ALC886 80 port Super I/O Page 22 COM2RS232/422/485 Page 22 Page 31 ITE8783 Page 33 GPIO 4-IN/4-OUT Page 31 Page 34 HEAD PHONE AMP Page 22 TPS6047A4RHBR SPEAKER Thermal Sensor *2 Page 22 PS2 Page 22 Voltages *4 Page 31 35 FAN *1 Page 35 1 x 3-pin fan connector (for CPU) Certifications 1 x keyboard/mouse pin header CE approval Onboard buzzer/SMBus2.0/reset SW/o n & off switch button FCC Class A Edge I/O Interface 1 x DVI-I connector Ordering Information 1 x HDMI connector 2 x dual stack USB connector EBC 354-2550 (P/N: 10E00035403X0) RoHS Compliant ® 2 x RJ45 with LED connector Low power embedded board with Intel Atom™ processor D2550 and ® based on Intel integrated graphics engine w/ DVI/24bit LVDS/ 6 x Watchdog Timer USB2.0/4 x COMs/2 x Mini-PCIe/2 x Gigabit LAN/2 x SATA Watchdog timeout can be programmable by software from 1 second to 255 seconds and from 1 minute to 255 minutes (tolerance 15% EBC 353/EBC 354 Cpu Cooler (P/N: 10E00035301X0) under room temperature 25°C) EBC 353/EBC 354 Cpu cooler with heat sink, Fau and Thermal Pad Storage Optional EBC 354 Cable Kit (P/N: 10E00035402X0) 2 x SATA port Include SATA cable, SATA power cable, PS2 KB/MS cable, DVI to DVI-D and D-SUB15 cable, COMPORT and USB cable System Monitor Monitoring of 4 voltages and 2 temperatures 4 voltage (Vcore, +12V, +3.3V, 5V) 2 temperatures (CPU, system) 1 fan speed detection On-board RTC On-chip RTC with battery backup 1 x external Li-Ion battery Power Input Support AT and ATX mode Power Requirements Power requirement: +12V DC Input One 4-pin power connector Dimensions 3.5" SBC form factor/146mm (L) x 105mm (W) (5.7”x 4.1”) Environment Operating temperature: -15°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: operating 10% to 90%, non-condensing 3.5" CPU Boards We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 11/26/2014 HDA_SDI0 SATA (2) USB 2.0 (8) IHDA LVDS VGA HDMI PCI 32 PCI-E *1(4) DDR3 800/1066
Frequently asked questions
Why choose IPC Station?

What is IPC Station' warranty policy for the EBC 354?

What carriers does IPC Station use to ship parts?

Does IPC Station sell to international (non-USA) customers?

What methods of payment does IPC Station accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods