NEXCOM EBC 352

Description
3.5" ECX on-board Intel® Atom™ D525 1.8GHz CPU
The EBC 352 is a PCI 104 3.5" ECX board with an on-board Intel® Atom™ dual core D525 with L2 cache 1MB and supports DDR3 SO-DIMM SDRAM module. This 3.5" board EBC 352 features dual display application to support independent CRT and LVDS 18/24-bit interface, dual Gigabit Ethernet, one PCI 104 and one mini PCI Express slot.
Part Number
EBC 352
Price
Request Quote
Manufacturer
NEXCOM
Lead Time
Request Quote
Category
Embedded Computers » 3.5" / 5.25" SBCs
Specifications
CPU Support
On-board Intel® Atom™ Dual Core D525 (1.8GHz, 1M Cache) processor
Main Memory
1 x 204-pin DDR3 SO-DIMM socket, DDR3 800 2GB Max., Non-ECC and Un-buffered
Chipset
Intel® NH82801HBM (ICH8M)
BIOS
AMI BIOS
Plug & Play support
Advanced Power Management
Advanced Configuration & Power Interface
8M bits SPI ROM
On-board LAN
2 x Intel® GbE LAN controllers
Support Boot From LAN (PXE) and Wake on LAN (WoL)
2 x RJ45 with LED
Display
Intel® D425/D525 integrated graphic engine, support Directx*9, with Intel Clear Video Technology on MPEG2 Hardware Acceleration
Analog VGA interface: 1 x DB15 VGA port, support up to 2048x1563@ 60Hz resolution
2x DF-13 20-pin LVDS connector, support single (24-bit) or dual (48-bit) LVDS panel support
CCFL interface: 1 x 7-pin JST connector, 5V or 12V power source to enable LCD Panel backlight Inverter
Audio
Realtek ALC888 CODEC for High Definition
1 x Mic-in and 1 x Line-out Pin header
Expansion
1 x Mini-PCIe socket
1 x PCI 104 slot
I/O Interface
Serial port: 4 port; 1 x RS232 DB9 Connector; 2 x RS232 with 10-pin box header, 2.0mm pitch; 1 x RS232/422/485 (COM2) with 10-pin box header, 2.0mm pitch
USB 2.0: 6 ports; 2 ports with USB 2.0 connector; 4 ports with internal JST connector; 8 x GPIO, 10-pin pin header, (GPI 0~3 and GPO0~3) with TTL Level (0/5V)
On-board Power LED and HDD Active LED Pin Header
1 x 3-pin fan connector (for CPU)
1 x Keyboard/Mouse pin header
On board Buzzer/ SMBus2.0/ Reset SW
Watchdog Timer
Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% under room temperature 25°C)
Storage
2 x SATA connector (support 2.5" HDD and SATA DOM)
1 x CF socket
System Monitor
Monitoring of 4 voltages and 2 temperatures
4 Voltage (Vcore, +12V, +3.3V, +5V)
2 Temperatures (CPU, System)
On-board RTC
On-chip RTC with battery backup
1 x External Li-Ion battery
Power Input
Support AT and ATX mode (ATX as the default)
Power Requirements
Power requirement: +12 V DC Input
One 4-pin power connector
Dimensions
3.5" ECX form factor/ 146mm (L) x 105mm (W) (5.7" x4.1")
Environment
Operating temperatures: 0°C to 60°C
Storage temperature: -20°C to 85°C
Relative humidity: Operating 10% to 90%, non-condensing
Certifications
CE approval
FCC Class A
Categorization Information
IoT Automation Solutions
Embedded Computing
3.5" / 5.25" SBC
Features
- Support Intel® Atom™ Dual Core D525 Processor
- Support DDR3 SO-DIMM SDRAM, up to 2GB
- Support VGA/ LVDS 18/ 24-bit Display
- Dual Intel Gigabit Ethernet
- Support PCI 104, 1x Mini PCI Express Socket
- 4 x COMs, 6 x USB 2.0
- Single DC12V Power Input
Datasheet
Extracted Text
® EBC 352 3.5" ECX on-board Intel Atom™ D525 1.8GHz CPU Main F Main Features eatures ® Support PCI-104, 1 x Mini-PCI Express Socket Support Intel Atom™ Dual Core D525 Processor 4 x COMs, 6 x USB2.0 Support DDR3 SO-DIMM SDRAM, up to 2GB Single DC12V Power Input Support VGA/LVDS 18/24-bit Display ® Dual Intel Gigabit Ethernet Product Overview ® The EBC 352 is a 3.5" ECX board with an on-board Intel Atom™ dual core D525 with L2 cache 1MB and supports DDR3 SO-DIMM SDRAM module. It features dual display application to support independent CRT and LVDS 18/24-bit interface, dual Gigabit Ethernet, one PCI-104 and one Mini PCI Express slot. Specifications CPU Support Audio ® Onboard Intel Atom™ Dual Core D525 (1.8GHz, 1M Cache) processor Realtek ALC888 CODEC for High Definition 1 x Mic-in and 1 x Line-out Pin header Main Memory 1 x 204-pin DDR3 SO-DIMM socket, DDR3 800 2GB Max., Non-ECC and Expansion Un-buffered 1 x Mini-PCIe socket 1 x PCI-104 slot Chipset ® Intel NH82801HBM (ICH8M) I/O Interface Serial port: 4 port BIOS 1 x RS232 DB9 Connector AMI BIOS 2 x RS232 with 10-pin box header, 2.0mm pitch Plug & Play support 1 x RS232/422/485 (COM2) with 10-pin box header, 2.0mm pitch Advanced Power Management USB2.0: 6 ports Advanced Configuration & Power Interface 2 ports with USB2.0 connector 8M bits SPI ROM 4 ports with internal JST connector On-board LAN 8 x GPIO, 10-pin pin header, (GPI 0~3 and GPO0~3) with TTL Level ® 2 x Intel GbE LAN controllers (0/5V) Support Boot From LAN (PXE) and Wake on LAN (WoL) On-board Power LED and HDD Active LED Pin Header 2 x RJ45 with LED 1 x 3-pin fan connector (for CPU) 1 x Keyboard/Mouse pin header Display On board Buzzer/SMBus2.0/Reset SW ® Intel D425/D525 integrated graphic engine, support Directx*9, with ® Intel Clear Video Technology on MPEG2 Hardware Acceleration Watchdog Timer Analog VGA interface: 1 x DB15 VGA port, support up to Watchdog timeout can be programmable by Software from 1 second 2048 x 1563@ 60Hz resolution to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% 2 x DF-13 20-pin LVDS connector, support single (24-bit) or dual under room temperature 25°C) (48-bit) LVDS panel support Storage CCFL interface: 1 x 7-pin JST connector, 5V or 12V power source to 2 x SATA connector (support 2.5" HDD and SATA DOM) enable LCD Panel backlight Inverter 3.5" CPU Boards LPC BUS DMI LVDS BUS LVDS BUS www.nexcom.com Block Diagram Pineview-D Microprocessor VGA >1.67GHz DX9 Graphics: 200 DDR3 Channel A DDR3 667/800 MHz SO-DIMM MHz DDR3 Memory Memory maximum support : 2G Controller XC3S200AN-4FTG256C LVDS LVDS CON LVDS (Single Channel) 18BIT TO 24/48BIT 18bit 18bit DMI SPI x4 DMI SPI SST25VF080B 4 Lanes 2Gb/s DMI SPI LVDS CON LVDS CON Rear Port 0/1 Gigabit Ethernet RJ45 LAN1 JST Con Port 2/3 USB 2.0 Intel 82574L MDI SUPPORT WAKE UP JST Con Prot 4/5 IN OUT PCIe x1 ICH8-M (82801GBM) Gigabit Ethernet 1ch 18bit 2ch 24bit MDI RJ45 LNA2 Scaler 652 balls 1280x800 1280x1024 Intel 82574L 31x31mm 1ch 18bit 1ch 24bit UltraDMA Bypass Compact Flash MINIPCIe 1ch 18bit 2ch 24bit SATA (3) HDA LPC PCI BUS PCI 104 SATA PORT 1 SATA BUS SATA PORT 2 High Denition Audio Link COM1 GPIO RS-232 SUPPER I/O 4IN / 4OUT COM2 LINE-OUT IT8783F/AX-L RS-232/422/485 TPA6047A4RHBR HD Audio KB/MS COM3 AMP ALC888-GR RS-232 MIC COM4 RS-232 Thermal FAN Sensor 1 x CF socket Ordering Information System Monitor EBC 352 (P/N: 10E00035200X0) RoHS Compliant Monitoring of 4 voltages and 2 temperatures ® Low power Embedded Board with Intel Atom™ Dual Core D525 4 voltage (Vcore , +12V , +3.3V , +5V) processor support DDR3 SO-DIMM memory module 2 temperatures (CPU, system) On-board RTC On-chip RTC with battery backup 1 x External Li-Ion battery Power Input Support AT and ATX mode (ATX as the default) Power Requirements Power requirement: +12VDC Input One 4-pin power connector Dimensions 3.5" ECX form factor 146mm (L) x 105mm (W) (5.7”x4.1”) Environment Operating temperatures: 0°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: Operating 10% to 90%, non-condensing Certifications CE approval FCC Class A 3.5" CPU Boards We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 03/05/2014 LVDS VGA ATA 100 (1) USB 2.0 (10) PCI PCI-E *1(6) DDR3 Ch A
Frequently asked questions
Why choose IPC Station?

What is IPC Station' warranty policy for the EBC 352?

What carriers does IPC Station use to ship parts?

Does IPC Station sell to international (non-USA) customers?

What methods of payment does IPC Station accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods