ACROMAG IP445A

Industry Pack Modules Industry Pack Modules IP445A Isolated Digital Output IP445A modules provide 32 isolated solid-state relay outputs to safely control discrete devices. A major IP445A advantage is its flexibility. The module supports wide range bipolar (AC or DC) voltage switching. Each port can be configured for high or When used together,the IP440A input module and IP445A output module simplify loop-back monitoring of your critical signals. low-side switches. The outputs are TTL-compatible when configured as low-side switches using on-board Specifications Ordering Information socketed pull-up resistors. Digital Outputs Industry Pack Modules Output channel configuration: 32 isolated solid-state relays Isolation protects your computer system from noise, IP445A support AC or DC (high/low-side switching) operation. transient signals, and field wiring faults. Outputs are Digital output module. Isolation: Logic and field connections are optically isolated by grouped into four 8-channel ports. Ports are isolated via IP445AE solid-state relays. Individual ports are also isolated from Same as IP445A plus extended temperature range. solid-state relays from the logic and from each other. each other. Output lines of an individual port share a Acromag offers a wide selection of Industry Pack Carrier Cards. common connection and are not isolated from each other. Readback buffers simplify output status monitoring. IP Logic and field lines are isolated from each other for And for easy closed-loop monitoring of critical control Software (see software documentation for details) voltages up to 250V AC or 354V DC on a continuous basis signals,use the IP445A with an IP440A input module. IPSW-API-VXW (unit will withstand a 1000V AC dielectric strength test for ® VxWorks software support package one minute without breakdown). IPSW-API-QNX Features Voltage range: 0 to ±60V DC or peak AC. ® QNX software support package n 32 bipolar solid state relays Output ON current range: 140mA maximum continuous IPSW-API-WIN (up to 1A total per port). ® n High/low-side switch configuration Windows DLL driver software support package Turn on time: IP445A 1mS typical,2mS maximum. IPSW-LINUX n Port-isolated output channels IP445AE 1mS typical,2.5mS maximum*. ™ Linux support (website download only) Turn off time: IP445A 1mS typical,2mS maximum. n ±60V AC/DC voltage range See accessories documentation for additional information. IP445AE 1mS typical,2.5mS maximum*. n High speed processing (0 wait states) *maximum values are measured at 85°C n TTL-compatible Output pull-up resistors: 4.7K ohms, socketed. n Failsafe power-up and system reset IP Compliance (ANSI/VITA 4) Meets IP specifications per ANSI/VITA 4-1995. n Output readback function IP data transfer cycle types supported: Input/output (IOSel*), ID read (IDSel*). n Socketed pull-up resistors for low-side Access times (8MHz clock): 0 wait states (250ns cycle). switching applications Updates: Requires four 8-bit writes to update all channels. n Current-limited solid-state relays Environmental Operating temperature: 0 to 70°C (IP445A) Benefits or -40 to 85°C (IP445AE model). n Unique ground reference points for each port permits Storage temperature: -40 to 150°C (all models). AC and DC switching on one module. Relative humidity: 5 to 95% non-condensing. n Pin are compatible with IP440A input module for MTBF: 713,455 hrs at 25°C, MIL-HDBK-217F, Notice 2. loopback monitoring. Power: +5V (±5%) all outputs on: 200mA maximum. ±5V (±5%) all outputs off: 8mA maximum. All trademarks are the property of their respective owners. Acromag, Inc. • 30765 S Wixom Rd, Wixom, MI 48393 • Phone: 248-295-0310 • Fax: 248-624-9234 • solutions@acromag.com • www.acromag.com 8400-422b Printed in USA 9/14 Copyright © 2005/2014 Acromag,Inc. Data subject to change without notice Industry Pack Modules