Industry Pack Modules Industry Pack Modules IP409 Differential Digital Input/Output The IP409 provides 24 differential I/O channels with interrupts. Each channel is programmable as an input or an output on a bit basis, in any combination. All channels can generate change-of-state (COS), low, or The IP409 has 24 channels with interrupts for reliable, high-speed serial or parallel data transfer across noisy environments. high level transition interrupts. Environmental Specifications Each channel uses a robust RS485/422A transceiver that Operating temperature: 0 to 70°C (IP409) or supports bi-directional data transfer in one direction at RS485 Transceivers -40 to 85°C (IP409E). Bus common mode range: -7 to 12V. a time (half-duplex). Differential data transmission Storage temperature: -55 to 125°C (all models). enables reliable, high speed communication across Channel configuration: 24 independent, non-isolated Relative Humidity: 5 to 95% non-condensing RS485/422A serial ports with a common signal distances of up to 4000 feet, even through noisy envi- Power: return connection. ronments. Differential transmission nullifies the effects +5V (±5%): 50mA maximum. Data rate: 250K bits/second, maximum. of ground shifts and noise signals which appear as ±12V (±5%) from P1: Not used. Cable length: 4000 feet, maximum. Use of a signal repeater common-mode voltages on the line. MTBF: 5,258,978 hrs at 25°C, MIL-HDBK-217F, Notice 2. can extend transmission distances. Termination resistors: 120 ohm resistors installed in board Features Ordering Information sockets at network endpoints only. n 24 digital input and/or output channels Differential output voltage: 5V, maximum. 1.5V minimum Industry Pack Modules (with 27 ohm load). IP409 n Output channels support readback monitoring Differential digital I/O module Common mode output voltage: 3V, maximum. n Socketed termination resistors IP409E Output short circuit current: 250mA, maximum. Same as IP409 plus extended temperature range n Ruggedized RS422A/485 transceivers Rise/fall time: 250nS, minimum, 800nS, typical. 2000nS, Acromag offers a wide selection of Industry Pack Carrier Cards. maximum. n Interrupt support on all channels Receiver input impedance: 12K ohms. - change-of-state Software (see software documentation for details) IPSW-API-VXW - high or low level transition IP Compliance (ANSI/VITA 4) ® VxWorks software support package Meets IP specifications per ANSI/VITA 4-1995. n Positive and negative current limiting IPSW-API-QNX IP data transfer cycle types supported: ® QNX software support package Input/output (IOSel*), ID read (IDSel*). n Parallel I/O for up to 24 bits IPSW-API-WIN Access Time (8MHz clock): 0 wait states (250nS cycle). ® Windows DLL driver software support package Interrupt handling format: An 8-bit vector is provided during Benefits IPSW-LINUX interrupt acknowledge cycles on D0 - D7. n All channels programmable as inputs or outputs. ™ Linux support (website download only) See accessories documentatin for additional information. n Differential data transmission is ideal for high-speed, long distance communication in noisy environments. All trademarks are the property of their respective owners. Acromag, Inc. • PO Box 437, Wixom, MI 48393 • Phone: 248-295-0310 • Fax: 248-624-9234 • solutions@acromag.com • www.acromag.com 8400-420 Printed in USA 6/05 Copyright © 2005 Acromag, Inc. Data subject to change without notice Industry Pack Modules