Industry Pack Modules Industry Pack Modules IP405 High Voltage Digital Output The IP405 controls up to 40 low-side switches (open-drain MOSFETs). Operation of this module is very simple. Writing a “0” When used together, the IP400 input module and IP405 output module simplify loop-back monitoring of your critical signals. bit to a channel data register opens the switch to turn off a field device. Similarly, writing a “1”bit closes the Specifications Ordering Information switch to turn on the device. Each register can be read back to verify the value. Digital Outputs Industry Pack Modules Output channel configuration: 40 open-drain DMOS MOSFETs IP405 Loopback monitoring of critical control signals is easily with common source connection. 40 output channels. accomplished by reading back output states using Voltage range: 0 to 60V DC, maximum. IP405E Acromag’s IP400 Digital Input Module. Output ON current range: 0 to 1A DC, continuous (up to 10A Same as IP405 plus extended temperature range. total for all channels combined), 250mA DC, continuous (all To ensure safe, reliable control under all conditions, the Acromag offers a wide selection of Industry Pack Carrier Cards. channels on). No deration required at elevated ambients. output operation is “fail-safe.” That is, outputs are Turn on time: 320nS typical (varies with load). Software (see software documentation for details) always off on power-up and are automatically cleared IPSW-API-VXW Turn off time: 500nS typical (varies with load). following a system software reset. ® VxWorks software support package IP Compliance (ANSI/VITA 4) IPSW-API-QNX Features Meets IP specifications per ANSI/VITA 4-1995. ® QNX software support package n 40 digital low-side switch outputs IP data transfer cycle types supported: IPSW-API-WIN Input/output (IOSel*), ID read (IDSel*). ® Windows DLL driver software support package n 0 to 60V DC output range Access Times (8MHz clock): IPSW-LINUX All functions: 0 wait states (250nS cycle), except ™ n High output current (up to 1A per channel) Linux support (website download only) Channel register write: 1 wait state (375nS cycle). See accessories documentation for additional information. n True logic operation Updates: Requires two 16-bit and one 8-bit writes to update all channels. n Low drain-to-source ON resistance Environmental n Failsafe power-up and system reset Operating temperature: 0 to 70°C (IP405) (open outputs) or -40 to 85°C (IP405E model). Storage temperature: -55 to 125°C (all models). n Output state readback capability (built-in) Relative Humidity: 5 to 95% non-condensing MTBF: 901,313 hrs at 25°C, MIL-HDBK-217F, Notice 2. Benefits n Latched buffers enable the user to read back the Power: +5V (±5%): 350mA maximum. output channel registers for verification purposes. +12V (±5%) from P1: 8.5mA maximum. n Loopback monitoring (with IP400) enables self-test -12V (±5%) from P1: 0mA (not used). and diagnostics to detect system faults. n Low drain-to-source ON resistance ensures TTL logic-low compatibility at high currents and reduces power dissipation. n Individual channels sink up to 1A DC continuous. No deration of output current required at high ambient temperatures. All trademarks are the property of their respective owners. Acromag, Inc. • PO Box 437, Wixom, MI 48393 • Phone: 248-295-0310 • Fax: 248-624-9234 • solutions@acromag.com • www.acromag.com 8400- 418 Printed in USA 6/05 Copyright © 2005 Acromag, Inc. Data subject to change without notice Industry Pack Modules