Industry Pack Carriers Industry Pack Carriers APC8620A PCI Bus IP Carrier Card This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. The APC8620A carrier card holds up to five plug-in I/O modules for extremely high channel density. Five IP module slots give you the freedom to mix a variety of I/O functions (A/D, D/A, digital in, digital out, Environmental Specifications serial I/O, etc.) on a single board. Or, combine modules Operating temperature: 0 to 70°C (APC8621A) of the same type for hundreds of channels on a single IP Module Compliance (ANSI/VITA 4) or -40 to 85°C (APC8621AE model). Meets or exceeds all written IP specifications per ANSI/VITA card. Either way, the APC8620A saves your precious Storage temperature: -55 to 100°C (all models). 4-1995 for 8MHz or 32MHz operation. card slots and reduces your costs. Relative humidity: 5-95%non-condensing Supports Type I and Type II ID space formats. Power: +3.3 Volts (±10%): 130mA, typical; 50mA max. Select I/O modules from Acromag’s offering of more Electrical/mechanical interface: Supports five single-size IP +5 Volts (±5%): 30mA, typical; 50mA, max. modules (A-E), or two double-size and one single-size IP than forty models or use any third-party IP mezzanine ±12 Volts provided to each IP module. module. ANSI/VITA 4 modules. MTBF: 413,003 hrs. at 25°C, MIL-HDBK-217F, notice 2 IP module I/O space, ID space, INT, and MEM space Physical supported. Features Physical configuration: PCI universal card (3.3V or 5V) IP module I/O space: 16 and 8-bit; supports 128 byte values n Five industry-standard IP module slots Length: 12.283 inches (312.0 mm) per IP module. Height: 4.200 inches (106.68 mm) IP module ID space: 16 and 8-bit; Supports Type I 32 bytes n Board resides in memory space Board thickness: 0.062 inches (1.59 mm) per IP (consecutive even byte addresses) and Type II 32 Maximum component height: 0.380 in. (9.65 mm) n Supports IP module I/O, ID, INT, and MEM spaces words per IP via D16 data transfers. Max. height under IP modules: 0.180 in. (4.57 mm). IP module memory space: 16 and 8-bit; supports up to 8M Connectors: n Plug-and-play carrier configuration and bytes of memory space per IP module. A-E (carrier field I/O): 50-pin male header interrupt support Interrupts: Supports two interrupt requests per IP and inter- rupt acknowledge cycles via access to IP INT space. n Two interrupt channels per IP module Ordering Information PCI Bus Compliance n Supervisory circuit reset generation Industry Pack Carriers This device meets or exceeds all written PCI local bus APC8620A specifications per rev. 2.2 dated December 1998. n Individually filtered and fused power Non-intelligent PCI bus carrier board. System base address: This board operates in PCI memory Holds five IP modules. space. It requires 1K of memory space for mapping the Benefits carrier controls, and IP module ID, INT, and I/O space. An APC8620AE n Quickly create custom I/O boards by mixing and optional 64MB of PCI memory space is required to use IP Same as APC8620A plus extended temperature range. matching I/O functions. module memory space. Software Data transfer bus: Slave with 32, 16, and 8-bit data transfer n Conveniently configure and control the I/O modules ® IPSW-API-VXW: VxWorks software support package operation. 32-bit read or write accesses implemented as through software with full IP module register/data two 16-bit transfers to IP modules. ® IPSW-API-WIN32: 32-bit Windows DLL driver software access. Interrupts (PCI bus INTA# interrupt signal): support pkg. Up to two requests sourced from each IP mapped to INTA#. ® IPSW-API-WIN64: 64-bit Windows DLL driver software n Easily integrate IPs with your software using Interrupt vectors come from IP modules via access to IP support pkg. RTOS VxWorks, QNX, Linux, or Win DLL for module INT space. ™ IPSW-LINUX: Linux support (website download only) Windows® 2000/XP/Vista/7 32-bit systems. Accessories 5025-550: Cable, unshielded, 50-pin header both ends 5025-551: Same as 5025-550 except shielded 5025-552: Termination panel, 50-pin connector, 50 screw terminals All trademarks are the property of their respective owners. Acromag, Inc. • PO Box 437, Wixom, MI 48393 • Phone: 248-295-0310 • Fax: 248-624-9234 • solutions@acromag.com • www.acromag.com 8400- 205c Printed in USA 6/2012 Copyright © 2010/2012 Acromag, Inc. Data subject to change without notice Industry Pack Carriers