ACROMAG APC8621A

Why buy from GID?

Quality

We are industry veterans who take pride in our work

Protection

Avoid the dangers of risky trading in the gray market

Access

Our network of suppliers is ready and at your disposal

Savings

Maintain legacy systems to prevent costly downtime

Speed

Time is of the essence, and we are respectful of yours

Details

Part Number APC8621A
Manufacturer ACROMAG
Category PCI I/O Products »  PCI Carrier Cards
Price Request Quote
Lead Time Request Quote

Description

APC8621A: Non-intelligent PCI Bus Carrier, Half-Length
This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. The half-length card is ideal for use in smaller PC chassis. Three IP module slots give you the freedom to mix a variety of I/O functions (A/D, D/A, digital in, digital out, serial I/O, etc.) on a single board. Or, combine modules of the same type for dozens of channels on a single card. Either way, the APC8621A saves your precious card slots and reduces your costs. Select I/O modules from Acromag's offering of more than forty models or use any third-party IP mezzanine ANSI/VITA 4 modules. The APC8621A is a drop-in replacement for the APC8621. Known differences between the APC8621 and the APC8621A Statement.Non-intelligent PCI bus carrier board, holds 3 IP modules (half length)

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Our Process

Our Process: Preparation
Preparation

Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.

Our Process: Receiving
Receiving

Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.

Our Process: Initial Testing
Initial Testing

Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.

Our Process: Refurbishment
Refurbishment

Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.

Our Process: Repair
Repair

Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.

Our Process: Final Testing
Final Testing

Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.

Our Process: Shipping
Shipping

After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.

Who We Are

IPC Station is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.

Do you need an APC8621A? We can help you find it at a competitive price!

Specifications

Categorization Information Embedded I/O & Processors
PCI I/O Products
PCI Carrier Cards
PCI Industry Pack Carriers

Features

  • Nonintelligent PCI bus carrier
  • Holds three IP modules
  • Half-length card for smaller PC chassis
  • Three industry-standard IP module slots
  • Board resides in memory space
  • Supports IP module I/O, ID, INT, and MEM spaces
  • Plug-and-play carrier configuration and interrupt support
  • Two interrupt channels per IP module
  • Supervisory circuit reset generation
  • Individually filtered and fused power
  • 0 to 70°C (-40 to 85°C E version)

Datasheet

Download "CoV-APC8620A_APC8621A.pdf" (124 KiB)

Extracted Text

Industry Pack Carriers Industry Pack Carriers APC8621A PCI Bus Half-Length IP Carrier Card This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system. The half-length card is ideal for use in smaller PC chassis. The APC8621A offers high channel density and modular flexibility in a half-length PCI carrier card. Three IP module slots give you the freedom to mix a Environmental Specifications variety of I/O functions (A/D, D/A, digital in, digital out, Operating temperature: 0 to 70°C (APC8621) serial I/O, etc.) on a single board. Or, combine modules IP Module Compliance (ANSI/VITA 4) or -40 to 85°C (APC8621E model). Meets or exceeds all written IP specifications per ANSI/VITA of the same type for dozens of channels on a single Storage temperature: -55 to 100°C (all models). 4-1995 for 8MHz or 32MHz operation. card. Either way, the APC8621A saves your precious Relative humidity: 5-95% non-condensing Supports Type I and Type II ID space formats. card slots and reduces your costs. Power: +3.3 Volts (±10%): 130mA, typical; 50mA max. Electrical/mechanical interface: Supports three single-size +5 Volts (±5%): 30mA, typical; 50mA, max. IP modules (A-C), or one double and one single-size IP Select I/O modules from Acromag’s offering of more ±12 Volts provided to each IP module. module. 32-bit IP modules are not supported. than forty models or use any third-party IP mezzanine MTBF: 413,003 hrs. at 25°C, MIL-HDBK-217F, notice 2 IP module I/O space, ID space, INT, and MEM space ANSI/VITA 4 modules. Physical supported. Physical configuration: PCI universal card (3.3V or 5V) IP module I/O space: 16 and 8-bit; supports 128 byte values Features Length: 6.600 inches (167.64 mm) per IP module. Height: 4.200 inches (106.68 mm) n Half-length card for smaller PC chassis IP module ID space: 16 and 8-bit; Supports Type I 32 bytes Board thickness: 0.062 inches (1.59 mm) per IP (consecutive even byte addresses) and Type II 32 n Three industry-standard IP module slots Maximum component height: 0.380 in. (9.65 mm) words per IP via D16 data transfers. Max. height under IP modules: 0.180 in. (4.57 mm). n Board resides in memory space IP module memory space: 16 and 8-bit; supports up to 8M Connectors: bytes of memory space per IP module. A-C (carrier field I/O): 50-pin male header n Supports IP module I/O, ID, INT, and MEM spaces Interrupts: Supports two interrupt requests per IP and inter- rupt acknowledge cycles via access to IP INT space. n Plug-and-play carrier configuration and Ordering Information interrupt support PCI Bus Compliance Industry Pack Carriers This device meets or exceeds all written PCI local bus n Two interrupt channels per IP module APC8621A specifications per rev. 2.2 dated December 1998. Non-intelligent PCI bus carrier board. System base address: This board operates in PCI memory n Supervisory circuit reset generation Holds three IP modules. space. It requires 1K of memory space for mapping the n Individually filtered and fused power carrier controls, and IP module ID, INT, and I/O space. An APC8621AE optional 64MB of PCI memory space is required to use IP Same as APC8621A plus extended temperature range. module memory space. Benefits Software Data transfer bus: Slave with 32, 16, and 8-bit data transfer n Quickly create custom I/O boards by mixing and ® IPSW-API-VXW: VxWorks software support package operation. 32-bit read or write accesses implemented as matching I/O functions. two 16-bit transfers to IP modules. ® IPSW-API-WIN32: 32-bit Windows DLL driver software Interrupts (PCI bus INTA# interrupt signal): support pkg. n Conveniently configure and control the I/O modules Up to two requests sourced from each IP mapped to INTA#. ® IPSW-API-WIN64: 64-bit Windows DLL driver software through software with full IP module register/data Interrupt vectors come from IP modules via access to IP support pkg. access. module INT space. ™ IPSW-LINUX: Linux support (website download only) n Easily integrate IPs with your software using Accessories RTOS VxWorks, QNX, Linux, or Win DLL for 5025-550: Cable, unshielded, 50-pin header both ends 2000/XP/Vista/7 32-bit operating system. 5025-551: Same as 5025-550 except shielded 5025-552: Termination panel, 50-pin connector, 50 screw terminals All trademarks are the property of their respective owners. Acromag, Inc. • PO Box 437, Wixom, MI 48393 • Phone: 248-295-0310 • Fax: 248-624-9234 • solutions@acromag.com • www.acromag.com 8400- 409c Printed in USA 6/2012 Copyright © 2010/2012 Acromag, Inc. Data subject to change without notice Industry Pack Carriers

Related Products

ACROMAG
APC8620A: Non-intelligent PCI Bus Carrier for IP Modules This board interfa...
ACROMAG
APC8621A: Non-intelligent PCI Bus Carrier, Half-Length This board interface...
ACROMAG
APC-PMC: Non-intelligent PMC Carrier Card This board provides an easy and l...

Disclaimer

Any product names, logos, brands, and other trademarks or media featured or referred to on IPC Station are the property of their respective owners.

GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.

All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.

IPC Station is a GID Industrial website.
GID Industrial Logo
Copyright © 2024 GID Holdings LLC, All Rights Reserved.
Page generated in 0.034 seconds.