SCHMERSAL 101183014

Why buy from GID?

Quality

We are industry veterans who take pride in our work

Protection

Avoid the dangers of risky trading in the gray market

Access

Our network of suppliers is ready and at your disposal

Savings

Maintain legacy systems to prevent costly downtime

Speed

Time is of the essence, and we are respectful of yours

Details

Part Number 101183014
Manufacturer SCHMERSAL
Category Safety »  Switches
Price Request Quote
Lead Time Request Quote

Description

Safety Switch, Magnetic, Power to Lock, 1NO/2NC, Screw Terminals, 24VAC/DC, Manual Release
The AZM170 Series is designed for machines/work cells where access to a hazardous work area must be controlled until safe conditions exist. Their solenoid-latching feature permits locking a machine guard until dangerous conditions, which may exist immediately after removal of power, have abated. Solenoid-latching may be controlled by a time delay, motion detector, position sensor or other suitable component. The unit features independent actuator key (guard) position and solenoid-latching pin position contacts. These permit the prevention of machine restart until the guard is closed and the solenoid-latching pin is in the locked position. The AZM170 consists of an electromechanical safety interlock switch joined to a solenoid-latching mechanism. Both the safety switch and solenoid mechanism feature "positive-break"contacts. In addition the actuator key features a built-in latch (unlocked key holding force of 7 pounds), and an auxiliary manual unlocking device the latter provided to aid in installation and for use in the event of a power failure (when using the "unlocking by solenoid"model). Each unit is supplied with a cord grip and a cap to seal the unused key entry port in the solenoid-latching mechanism.

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Our Process

Our Process: Preparation
Preparation

Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.

Our Process: Receiving
Receiving

Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.

Our Process: Initial Testing
Initial Testing

Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.

Our Process: Refurbishment
Refurbishment

Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.

Our Process: Repair
Repair

Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.

Our Process: Final Testing
Final Testing

Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.

Our Process: Shipping
Shipping

After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.

Who We Are

IPC Station is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.

Do you need a 101183014? We can help you find it at a competitive price!

Specifications

Part Number 101183014
Product Series AZ
Voltage See Spec or N/A
Weight - lbs. 0.7700
Base Unit of Measure Each
Categorization Information Safety - Intrinsic, Curtains, Mats, etc.
Safety Switch, Magnetic, Power to Lock, 1NO/2NC,-101183014

Features

  • Thermoplastic enclosure
  • Double-insulated
  • Compact design
  • 90 mm x 84 mm x 30 mm
  • 1 Cable entry M 20 x 1.5
  • Interlock with protection against incorrect locking
  • Long life
  • High holding force
  • Cut clamp termination

Datasheet

Download "schmersal-azmoneseventysk-twelveoozrka-twentyfourvacdc-datasheet.pdf" (283 KiB)

Extracted Text

18.02.2016 - 19:01:06h Datasheet - AZM 170SK-12/00ZRKA 24 VAC/DC Solenoid interlock / AZM 170 • Thermoplastic enclosure • Double-insulated • Compact design • 90 mm x 84 mm x 30 mm • 1 Cable entry M 20 x 1.5 • Interlock with protection against incorrect locking. • Long life • High holding force • Cut clamp termination (Minor differences between the printed image and the original product may exist!) Ordering details Product type description AZM 170SK-12/00ZRKA 24 VAC/DC Article number 101183014 EAN code 4030661318677 eCl@ss 27-27-26-03 Approval Approval BG USA/CAN CCC Classification Standards EN ISO 13849-1 B10d Opener (NC) 2.000.000 Mission time 20 Years notice Global Properties Product name AZM 170 Standards EN 60947-5-1, BG-GS-ET-19 Compliance with the Directives (Y/N) Yes Number of actuating directions 2 piece Active principle electromechanical Duty cycle Magnet 100 % Materials - Material of the housings Plastic, glass-fibre reinforced thermoplastic, self-extinguishing - Material of the contacts Silver Housing coating None Weight 347 g Mechanical data Design of electrical connection Screw terminals Cable section - Min. Cable section 1 x 0,25 mm² - Max. Cable section 1 x 1.5 mm², flexible Mechanical life > 1.000.000 operations Emergency unlocking device (Y/N) No Manual release (Y/N) No Emergency release (Y/N) No Latching force 30 N Positive break force 8.5 N positive break travel 11 mm Clamping force F 1000 N Max. Actuating speed 2 m/s Ambient conditions Ambient temperature - Min. environmental temperature −25 °C - Max. environmental temperature +60 °C Protection class IP67 to IEC/EN 60529 Electrical data Design of control element Normally open contact (NO), Opener (NC) notice change-over contact with double break, type Zb or 2 NC contacts, with galvanically separated contact bridges Switching principle Creep circuit element Number of auxiliary contacts 1 piece Number of safety contacts 2 piece Power to unlock No Power to lock Yes Rated control voltage Us 24 VAC/DC Power consumption max. 10 W Rated impulse withstand voltage Uimp 4 kV Rated insulation voltage Ui 250 V Thermal test current Ithe 10 A Utilisation category AC-15: 230 V / 4 A DC-13: 24 V / 4 A Max. fuse rating 6 A gG D-fuse ATEX Explosion protection categories for gases None Explosion protected category for dusts None Miscellaneous data Applications sliding safety guard, removable guard, hinged safety guard Dimensions Dimensions of the sensor - Width of sensor 90 mm - Height of sensor 100.5 mm - Length of sensor 30 mm notice Individual coding available on request Diagram Note Diagram positive break NC contact active no active Normally-open contact Normally-closed contact Ordering suffix The applicable ordering suffix is added at the end of the part number of the safety switch. Order example: AZM 170SK-12/00ZRKA 24 VAC/DC-1637 ...-1637 0,3 µm gold-plated contacts ...ST-2431 connector M12 , Individual solenoid monitoring Ordering code AZM 170(1)-(2)Z(3)K(4)-(5)-(6)-(7) (1) without IDC method of termination SK Screw connection (2) 11 1 Normally open contact (NO) / 1 Opener (NC) 02 2 Opener (NC) 12/0.0 1 Normally open contact (NO), 2 Opener (NC) / - (3) without Latching force 5 N R Latching force 30 N I Individual coding (4) without Power to unlock A Power to lock (5) without cable gland ST Connector M12 x 1 ST-2431 Connector M12 x 1, Individual solenoid monitoring (6) 24VAC/DC Us 24 VAC/DC 110VAC Us 110 VAC 230VAC Us 230 VAC (7) without Manual release 2197 Manual release from side (Power to unlock) 1637 gold-plated contacts AZM 170ST and AZM 170SK AZM 170ST-(1)Z(2)K(3)-(4)-(5)-024 AZM 170SK-(1)Z(2)K(3)-(4)-(5)-024 (1) 11/11 1 Normally open contact (NO), 1 Opener (NC) / 1 Normally open contact (NO), 1 Opener (NC) 11/02 1 Normally open contact (NO), 1 Opener (NC) / 2 Opener (NC) 12/00 1 Normally open contact (NO), 2 Opener (NC) / - 12/11 1 Normally open contact (NO), 2 Opener (NC) / 1 Normally open contact (NO), 1 Opener (NC) 12/02 1 Normally open contact (NO), 2 Opener (NC) / 2 Opener (NC) 02/01 2 Opener (NC), - / 1 Opener (NC), - 02/10 2 Opener (NC), - / 1 Normally open contact (NO), - (2) without Latching force 5 N R Latching force 30 N (3) without Power to unlock A Power to lock (4) 1637 gold-plated contacts (5) 2197 Manual release for Power to unlock Documents Operating instructions and Declaration of conformity (en) 510 kB, 16.11.2015 Code: mrl_azm170-xx-xx_en Operating instructions and Declaration of conformity (da) 509 kB, 24.11.2015 Code: mrl_azm170-xx-xx_da Operating instructions and Declaration of conformity (it) 510 kB, 24.11.2015 Code: mrl_azm170-xx-xx_it Operating instructions and Declaration of conformity (nl) 511 kB, 24.11.2015 Code: mrl_azm170-xx-xx_nl Operating instructions and Declaration of conformity (de) 494 kB, 16.11.2015 Code: mrl_azm170-xx-xx_de Operating instructions and Declaration of conformity (cs) 546 kB, 24.11.2015 Code: mrl_azm170-xx-xx_cs Operating instructions and Declaration of conformity (pt) 384 kB, 26.06.2012 Code: mrl_azm170-xx-xx_pt Operating instructions and Declaration of conformity (jp) 535 kB, 27.05.2011 Code: mrl_azm170-xx-xx_jp Operating instructions and Declaration of conformity (fr) 506 kB, 10.09.2015 Code: mrl_azm170-xx-xx_fr Operating instructions and Declaration of conformity (es) 512 kB, 24.11.2015 Code: mrl_azm170-xx-xx_es Operating instructions and Declaration of conformity (pl) 543 kB, 10.09.2015 Code: mrl_azm170-xx-xx_pl BG-test certificate (en) 260 kB, 09.12.2015 Code: z_m17p02 BG-test certificate (de) 257 kB, 09.12.2015 Code: z_m17p01 CCC certification (en) 596 kB, 23.06.2014 Code: q_371p02 CCC certification (cn) 607 kB, 23.06.2014 Code: q_371p03 EAC certification (ru) 809 kB, 05.10.2015 Code: q_6040p17_ru Images Dimensional drawing (basic component) System components Actuator 101122893 - AZ 17/170-B1 • Particularly suitable for sliding doors 101137406 - AZ 17/170-B1-2245 • Particularly suitable for sliding doors • Damps vibration on guard device 101122895 - AZ 17/170-B5 • Particularly suitable for sliding doors 101139788 - AZ 17/170-B11 • Particularly suitable for sliding doors 101139789 - AZ 17/170-B15 • Particularly suitable for sliding doors 101123391 - AZM 170-B6 • Particularly suitable for hinged guards • For very smal actuating radii • The direction of actuation can be selected by applicable insertion of the insert Accessories 101208493 - AZM 170-B CENTERING GUIDE • for AZ 17 and AZM 170 101100887 - TRIANGULAR KEY TK-M5 • For manual release using M5 triangular key, available as accessory • For maintenance, installation, etc. Connector A-K4M12 • Pre-wired cable • 4-pole S-K4M12 • Connector without cable • 4-pole K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am 18.02.2016 - 19:01:10h Kasbase 3.2.1.F.64I

Related Products

SCHMERSAL
Safety Switch, Interlock, DC, 24VDC
SCHMERSAL
Safety Switch, Actuator, Interlock, 2NC, Screw Connection
SCHMERSAL
Safety Switch, Keyed Spring Return, 2NO, Standard, W/No Add On's The Series...
SCHMERSAL
Safety Switch, Acutator, Thermo Enclos, 1NO/2NC, Cage Clamps, Power To Unlo...
SCHMERSAL
Safety Switch, Interlock, Power To Lock, 1NO/2NC, Screw Connection, 24 VAC/...
SCHMERSAL
Safety Switch, Interlock, Thermo Enclos, 1NO/2NC, Cage Clamps, Power To Loc...

Disclaimer

Any product names, logos, brands, and other trademarks or media featured or referred to on IPC Station are the property of their respective owners.

GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.

All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.

IPC Station is a GID Industrial website.
GID Industrial Logo
Copyright © 2024 GID Holdings LLC, All Rights Reserved.
Page generated in 0.038 seconds.