18.02.2016 - 19:43:50h Datasheet - AZM 161CC-12/12RKA-024 Solenoid interlock / AZM 161 Preferred typ • Thermoplastic enclosure • Double-insulated • Interlock with protection against incorrect locking. • 130 mm x 90 mm x 30 mm • 6 Contacts • Long life • Large wiring compartment • Manual release • cable entries 4 M 16 x 1.5 (Minor differences between the printed image and the original product may exist!) Ordering details Product type description AZM 161CC-12/12RKA-024 Article number 101166287 EAN code 4030661213996 eCl@ss 27-27-26-03 Approval Approval BG USA/CAN CCC Classification Standards EN ISO 13849-1 B10d Opener (NC) 2.000.000 Mission time 20 Years notice Global Properties Product name AZM 161 Standards EN 60947-5-1, BG-GS-ET-19 Compliance with the Directives (Y/N) Yes Number of actuating directions 3 piece Active principle electromechanical Duty cycle Magnet 100 % Materials - Material of the housings Plastic, glass-fibre reinforced thermoplastic, self-extinguishing - Material of the contacts Silver Housing coating None Weight 500 g Mechanical data Actuating play in direction of actuation 5.5 mm Design of electrical connection Cage clamps Cable section - Min. Cable section 1 x 0,25 mm² - Max. Cable section 1 x 1.5 mm² Mechanical life > 1.000.000 operations notice All indications about the cable section are including the conductor ferrules. Emergency unlocking device (Y/N) No Manual release (Y/N) Yes Emergency release (Y/N) No Latching force 30 N Positive break force 20 N positive break travel 10 mm Clamping force F 2000 N Max. Actuating speed 2 m/s Actuating frequency max. 1000 / h Ambient conditions Ambient temperature - Min. environmental temperature −25 °C - Max. environmental temperature +60 °C Protection class IP67 to IEC/EN 60529 Electrical data Design of control element Normally open contact (NO), Opener (NC) Switching principle Creep circuit element Number of auxiliary contacts 2 piece Number of safety contacts 4 piece Power to unlock No Power to lock Yes Rated control voltage Us 24 VAC/DC Power consumption max. 10 W Rated impulse withstand voltage Uimp 4 kV Rated insulation voltage Ui 250 V Thermal test current Ithe 6 A Utilisation category AC-15: 230 V / 4 A, DC-13: 24 V / 2,5 A Required rated short-circuit current 1000 A Max. fuse rating 6 A gG D-fuse To DIN EN 60269-1 ATEX Explosion protection categories for gases None Explosion protected category for dusts None Miscellaneous data Applications sliding safety guard, removable guard, hinged safety guard Dimensions Dimensions of the sensor - Width of sensor 130 mm - Height of sensor 90 mm - Length of sensor 30 mm notice Manual release • For maintenance, installation, etc. • For manual release using M5 triangular key, available as accessory Diagram Note Diagram positive break NC contact active no active Normally-open contact Normally-closed contact Switch travel diagram Notes Switch travel diagram Contact closed Contact open Setting range Break point Positive opening sequence/- angle VS adjustable range of NO contact VÖ adjustable range of NC contact N after travel Ordering suffix The applicable ordering suffix is added at the end of the part number of the safety switch. Order example: AZM 161CC-12/12RKA-024G Protected against incorrect polarity and voltage spikes. limited terminating space 0,75 mm² Diagram 14 guard open 13 +24 VDC 63 0 VDC 64 unlocked ...G Ordering code AZM 161 (1)-(2)(3)K(4)-(5)-(6)(7) (1) SK Screw connection CC Cage clamps ST male connector M12, 8- and 4-poles (Only for Us: 24 VAC/DC) (2) 12/12 2 Normally open contact (NO) / 4 Opener (NC) 12/11 2 Normally open contact (NO) / 3 Opener (NC) (Plug-in connection) 11/12 2 Normally open contact (NO) / 3 Opener (NC) (Plug-in connection) (3) without Latching force 5 N R Latching force 30 N (4) without Power to unlock A Power to lock (5) without Manual release lateral ED Manual release cover-side EU Manual release rear T Emergency exit lateral TD Emergency exit cover-side TU Emergency exit rear N Emergency release (6) 024 Us: 24 VAC/DC 110/230 Us: 110/230 VAC (7) G with LED (Only for Us: 24 VAC/DC) Documents Operating instructions and Declaration of conformity (sv) 423 kB, 15.08.2012 Code: mrl_azm161_sv Operating instructions and Declaration of conformity (es) 400 kB, 11.03.2014 Code: mrl_azm161_es Operating instructions and Declaration of conformity (de) 439 kB, 29.01.2016 Code: mrl_azm161_de Operating instructions and Declaration of conformity (pt) 402 kB, 10.07.2014 Code: mrl_azm161_pt Operating instructions and Declaration of conformity (en) 443 kB, 29.01.2016 Code: mrl_azm161_en Operating instructions and Declaration of conformity (pl) 424 kB, 24.03.2014 Code: mrl_azm161_pl Operating instructions and Declaration of conformity (fr) 401 kB, 14.04.2014 Code: mrl_azm161_fr Operating instructions and Declaration of conformity (cs) 425 kB, 15.08.2012 Code: mrl_azm161_cs Operating instructions and Declaration of conformity (jp) 481 kB, 11.03.2014 Code: mrl_azm161_jp Operating instructions and Declaration of conformity (it) 392 kB, 11.03.2014 Code: mrl_azm161_it Operating instructions and Declaration of conformity (nl) 425 kB, 15.08.2012 Code: mrl_azm161_nl BG-test certificate (de) 140 kB, 20.05.2015 Code: z_m16p01 BG-test certificate (en) 134 kB, 20.05.2015 Code: z_m16p02 CCC certification (en) 596 kB, 23.06.2014 Code: q_371p02 CCC certification (cn) 607 kB, 23.06.2014 Code: q_371p03 EAC certification (ru) 809 kB, 05.10.2015 Code: q_6040p17_ru notice (de, en) 88 kB, 27.09.2007 Code: s_161p01 Images Dimensional drawing (basic component) Dimensional drawing (basic component) Operating principle System components Actuator 101145117 - AZM 161-B1 101144416 - AZM 161-B1E 101171859 - AZM 161-B1ES 101175431 - AZM 161-B1F 101171125 - AZM 161-B1S 101173089 - AZM 161-B1-2053 WITH BALL LATCH 101164100 - AZM 161-B1-1747 WITH MAGNETIC LATCH 101178199 - AZM 161-B1-2024 101176642 - AZM 161-B1-2177 WITH CENTERING GUIDE 101174113 - AZM 161-B6-2177 WITH CENTERING GUIDE • For very smal actuating radii 101170375 - AZM 161-B6S 101144420 - AZM 161-B6 • For very smal actuating radii Door-handle system AZM 161-STS30 • Latching handle • Suitable for all types of guard Accessories 101100887 - TRIANGULAR KEY TK-M5 • For manual release using M5 triangular key, available as accessory • For maintenance, installation, etc. 101149213 - Mounting set MS AZM 161 R/P 101150376 - Mounting set MS AZM 161 P K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am 18.02.2016 - 19:43:51h Kasbase 3.2.1.F.64I