SCHMERSAL 101152887

Why buy from GID?

Quality

We are industry veterans who take pride in our work

Protection

Avoid the dangers of risky trading in the gray market

Access

Our network of suppliers is ready and at your disposal

Savings

Maintain legacy systems to prevent costly downtime

Speed

Time is of the essence, and we are respectful of yours

Details

Part Number 101152887
Manufacturer SCHMERSAL
Category Safety »  Switches
Price Request Quote
Lead Time Request Quote

Description

Safety Switch, w/ Separate Actuator
The Series AZ15/16 is designed for use with movable machine guards/access gates which must be closed for operator safety. Their positive-opening NC contacts provide a significantly higher level of safety than conventional spring driven switches whose contacts can weld or stick shut. And their tamper-resistant design prevents bypassing with simple tools, bent wires or other readily available means. Their IP67 rating makes them ideal for interlocking safety guards in hostile environments.

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Our Process

Our Process: Preparation
Preparation

Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.

Our Process: Receiving
Receiving

Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.

Our Process: Initial Testing
Initial Testing

Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.

Our Process: Refurbishment
Refurbishment

Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.

Our Process: Repair
Repair

Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.

Our Process: Final Testing
Final Testing

Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.

Our Process: Shipping
Shipping

After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.

Who We Are

IPC Station is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.

Do you need a 101152887? We can help you find it at a competitive price!

Specifications

Part Number 101152887
Product Series AZ
Voltage See Spec or N/A
Weight - lbs. 0.5000
Base Unit of Measure Each
Categorization Information Safety - Intrinsic, Curtains, Mats, etc.
Safety Switch, w/ Separate Actuator-101152887

Features

  • Thermoplastic enclosure
  • Double-insulated
  • Large wiring compartment
  • 52 mm x 90 mm x 30 mm
  • Multiple coding
  • Long life
  • High level of contact reliability with low voltages and currents
  • Insensitive to soiling
  • Slotted holes for adjustment, circular holes for location
  • 3 cable entries M 16 x 1.5
  • LED version available

Datasheet

Download "schmersal-az-fifteensixteen-operatinginstructions.pdf" (498 KiB)

Extracted Text

Operating instructions Safety switch AZ 15 / AZ 16 1 About this document 1.1 Function This operating instructions manual provides all the information you need for the mounting, set-up and commissioning to ensure the safe operation and disassembly of the safety switchgear. The operating inst- ructions must be available in a legible condition and a complete version EN Operating instructions...................... pages 1 to 4 in the vicinity of the device. Translation of the original operating instructions 1.2 Target group: authorised qualified personnel All operations described in this operating instructions manual must be carried out by trained specialist personnel, authorised by the plant Vous trouverez la version Encontrará el manual de operator only. FR ES actuelle du mode d’emploi dans instrucciones actual en su votre langue nationale officielle idioma oficial de la UE en nu- sur l’Internet, www.schmersal. estra página de Internet www. Please make sure that you have read and understood these operating net. schmersal.net. instructions and that you know all applicable legislations regarding occupational safety and accident prevention prior to installation and U vindt de huidige versie van Il manuale d‘istruzioni aggior- NL IT de gebruikshandleiding in uw nato nella vostra lingua (lingua putting the component into operation. officiële landstaal op het Inter- ufficiale UE) è scaricabile in net, www.schmersal.net. Internet all‘indirizzo www. schmersal.net. The machine builder must carefully select the harmonised standards to be complied with as well as other technical specifications for the selec- EU公用語で書かれた最新の JP tion, mounting and integration of the components. 取扱説明書は、インターネッ (www.schmersal.net)からダウ ンロードできます。 1.3 Explanation of the symbols used Information, hint, note: This symbol is used for identifying useful additional information. Caution: Failure to comply with this warning notice could Content lead to failures or malfunctions. Warning: Failure to comply with this warning notice could 1 About this document lead to physical injury and/or damage to the machine. 1.1 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.2 Target group: authorised qualified personnel. . . . . . . . . . . . . . . . . .1 1.3 Explanation of the symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.4 Appropriate use 1.4 Appropriate use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 The products described in these operating instructions are developed to 1.5 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 execute safety-related functions as part of an entire plant or machine. It 1.6 Warning about misuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 is the responsibility of the manufacturer of a machine or plant to ensure 1.7 Exclusion of liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 the proper functionality of the entire machinery or plant. 2 Product description The safety switchgear must be exclusively used in accordance with the 2.1 Ordering code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 versions listed below or for the applications authorised by the manufac- 2.2 Special versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 turer. Detailed information regarding the range of applications can be 2.3 Destination and use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 found in the chapter "Product description". 2.4 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2.5 Safety classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 1.5 General safety instructions The user must observe the safety instructions in this operating instruc- 3 Mounting tions manual, the country-specific installation standards as well as all 3.1 General mounting instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 prevailing safety regulations and accident prevention rules. 3.2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Further technical information can be found in the Schmersal 4 Electrical connection catalogues or in the online catalogue on the Internet: www. 4.1 General information for electrical connection. . . . . . . . . . . . . . . . . .3 schmersal.net. 4.2 Contact variants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 The information contained in this operating instructions manual is provi- 5 Set-up and maintenance ded without liability and is subject to technical modifications. 5.1 Functional testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 5.2 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 If multiple safety components are wired in series, the Perfor- 6 Disassembly and disposal mance Level to EN ISO 13849-1 will be reduced due to the 6.1 Disassembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 restricted error detection under certain circumstances. The 6.2 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 entire concept of the control system, in which the safety com- ponent is integrated, must be validated to EN ISO 13849-2. 7 Appendix 7.1 EC Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 There are no residual risks, provided that the safety instructions as well as the instructions regarding mounting, commissioning, operation and maintenance are observed. EN 1 1 x.000 / v.A. / 07.2009 / BZ-Nr. 50094-135V900 / Teile-Nr. 1085359-EN / Ausgabe R Operating Instructions Safety switch AZ 15 / AZ 16 1.6 Warning about misuse The user must evaluate and design the safety chain in accordance with the relevant standards and on the required In case of inadequate or improper use or manipulations of the safety level. safety switchgear, personal hazards or damage to machinery or plant components cannot be excluded. The relevant requi- rements of the standard EN 1088 must be observed. 2.4 Technical data Standards: IEC/EN 60947-5-1, EN ISO 13849-1, 1.7 Exclusion of liability BG-GS-ET-15 We shall accept no liability for damages and malfunctions resulting from Enclosure: glass-fibre reinforced thermoplastic, defective mounting or failure to comply with this operating instructions self-extinguishing manual. The manufacturer shall accept no liability for damages resul- Actuator: stainless steel 1.4301 ting from the use of unauthorised spare parts or accessories. Protection class: IP 67 to IEC/EN 60529; DIN VDE 0470-1 For safety reasons, invasive work on the device as well as arbitrary re- Contact material: Silver pairs, conversions and modifications to the device are strictly forbidden; Contact types: AZ 15: 1 NC contact; AZ 16: change-over the manufacturer shall accept no liability for damages resulting from contact with double break Zb or 2 NC such invasive work, arbitrary repairs, conversions and/or modifications contacts or 3 NC contacts, with galvani- to the device. cally separated contact bridges Switching system: to IEC 60947-5-1; slow action, A positive break NC contact 2 Product description Connection: Screw connection or M 12 x 1 connector, 4 pole 2.1 Ordering code 2 Cable section: 0,25...2,5 mm (including conductor This operating instructions manual applies to the following types: ferrules) Cable entry: 3 x M16 x 1.5 AZ 15-ZV➀K-➁-➂ U : 6 kV No. Insert imp U : 500 V ➀ Ejection force i I : 10 A R Latching force 30 N the Utilisation category: AC-15 / DC-13 ➁ Cable entry M16 I /U : 4 A / 230 VAC 4 A / 24 VDC ST M12 x 1 connector e e Required short-circuit 1000 A ➂ 2254 Latching force 5 N current: 1762 Front mounting Max. fuse rating: 6 A gG D-fuse 1637 Gold-plated contacts Positive break travel: 8 mm Positive break force: each NC contact 10 N AZ 16-➀ZV➁K-➂-➃-➄ Ambient temperature: – 30 °C … + 80 °C ➀ 1 NO / 1 NC contact Mechanical life: >1 million operations 02 2 NC contacts Latching force: 30 N for ordering suffix R 03 3 NC contacts Actuating speed: max. 0,2 m/s 12 1 NO / 2 NC contact Max. switching frequency: 4000 operations / h ➁ Ejection force R Latching force 30 N ➂ G24 with LED ➃ Cable entry M16 2.5 Safety classification M20 Cable entry M20 ST M12 x 1 connector bottom Standards: EN ISO 13849-1 STL M12 x 1 connector LHS B (NC contact): 2,000,000 10d STR M12 x 1 connector RHS B (NO contact) at 10% ohmic 1,000,000 10d ➄ 2254 Latching force 5 N contact load: 1762 Front mounting B d x h x 3600 s/h 10d op op 1637 Gold-plated contacts nop MTTF d 0,1 x n t op cycle Only if the information described in this operating instructions (Specifications can vary depending on the application-specific parame- manual are realised correctly, the safety function and therefo- ters h , d and t as well as the load.) re the compliance with the Machinery Directive is maintained. op op cycle 2.2 Special versions 3 Mounting For special versions, which are not listed in the order code below 2.1, these specifications apply accordingly, provided that they correspond to 3.1 General mounting instructions the standard version. The mounting dimensions are indicated on the rear of the component. The switch enclosure must not be used as end stop. Any mounting 2.3 Destination and use position. The mounting position however must be chosen so that the The safety switches with separate actuator are suitable for sliding, ingression of dirt and soiling in the used opening is avoided. The unused hinged and removable safety guards, which need to be closed in order openings must be sealed by means of slot sealing plugs (AZ 15/16 - to ensure the necessary operational safety. 1476-1 available as accessory) after fitting. The safety switches are used for applications, in which the hazardous Mounting of the actuators: See mounting instructions actuators. situation is terminated without delay when the safety guard is opened. When the safety guard is opened, the NC contacts are positively ope- ned and the NO contacts are closed. 2 EN Operating Instructions Safety switch AZ 15 / AZ 16 4.2 Contact variants Please observe the remarks of the standards EN ISO 12100, Contacts are shown with safety guard closed. EN 953 and EN 1088. 11 12 11 12 3.2 Dimensions All measurements in mm. 1 2 3 4 AZ 15 / AZ 16 AZ 15ZVK AZ 15ZVK-ST AZ 15ZVRK AZ 15ZVRK-ST 40 40 13 14 11 12 13 14 11 12 21 22 21 22 21 22 21 22 31 32 31 32 AZ 16ZVK AZ 16-02ZVK AZ 16-12ZVK AZ 16-03ZVK AZ 16ZVRK AZ 16-02ZVRK AZ 16-12ZVRK AZ 16-03ZVRK M16 M16 13 14 11 12 M16 52 21 22 21 22 28 52 28 1 2 3 4 1 2 3 4 AZ 16ZVK-ST AZ 16-02ZVK-ST AZ 16ZVRK-ST AZ 16-02ZVRK-ST AZ 15 AZ 16 LED Front mounting 13 14 L+ 13 YE GN 24VDC 14 15 YE GN L- 15 5 Set-up and maintenance 5.1 Functional testing The safety function of the safety components must be tested. The 4 Electrical connection following conditions must be previously checked and met: 1. Check the free movement of the actuating element 2. Check the integrity of the cable entry and connections 4.1 General information for electrical connection 3. Check the switch enclosure for damage 5.2 Maintenance The electrical connection may only be carried out by autho- A regular visual inspection and functional test, including the following rised personnel in a de-energised condition. steps, is recommended: 1. Check the free movement of the actuating element The contact labelling can be found in the wiring compartment of the 2. Remove particles of dust and soiling switch. For the cable entry, suitable cable glands with an appropriate 3. Check cable entry and connections degree of protection must be used. After wiring, dust and soiling must be removed from the wiring compartment. The safety switch is double Damaged or defective components must be replaced. insulated. The use of a protective ground connector therefore is not authorised. 6 Disassembly and disposal 6.1 Disassembly The safety switchgear must be disassembled in a de-energised condi- tion only. 6.2 Disposal The safety switchgear must be disposed of in an appropriate manner in accordance with the national prescriptions and legislations. EN 3 75 30 18 8 8 ø5,5 90 30 18 8 8 ø5,5 Operating Instructions Safety switch AZ 15 / AZ 16 7 Appendix 7.1 EC Declaration of conformity EC Declaration of conformity Translation of the original declaration of K.A. Schmersal GmbH conformity Industrielle Sicherheitsschaltsysteme Möddinghofe 30 ▪ 42279 Wuppertal Germany Internet: www.schmersal.com We hereby certify that the hereafter described safety components both in its basic design and construction conform to the applicable European Directives. Name of the safety component / type: AZ 15 / AZ 16 Description of the safety component: Positive break position switch with separate actuator for safety functions Harmonised EC-Directives: 2006/42/EC EC-Machinery Directive Person authorized for the compilation of the Ulrich Loss technical documentation: Möddinghofe 30 42279 Wuppertal Place and date of issue: Wuppertal, 11. May 2009 Authorised signature Heinz Schmersal Managing Director Note The currently valid declaration of conformity can be downloa- ded from the internet at www.schmersal.net. K. A. Schmersal GmbH Industrielle Sicherheitsschaltsysteme Möddinghofe 30, D - 42279 Wuppertal Postfach 24 02 63, D - 42232 Wuppertal Telefon +49 - (0)2 02 - 64 74 - 0 Telefax +49 - (0)2 02 - 64 74 - 1 00 E-Mail: info@schmersal.com Internet: http://www.schmersal.com 4 EN Index B-EN

Related Products

SCHMERSAL
Safety Switch, Actuator, Interlock, 2NC, Screw Connection
SCHMERSAL
Safety Switch, Interlock, Magnetic, 1NO/1NC, Connector M12 The AZM170 consi...
SCHMERSAL
Safety Switch, Thermoplastic Enclosure Screw Connection The Series AZ15/16...
SCHMERSAL
Safety Switch, Key Maintained Upon Insertion, 3NC, Light (1-2 lbs) Key Rete...
SCHMERSAL
Safety Switch, Magnetic, Power to Lock, 1NO/2NC, Screw Terminals, 24VAC/DC,...
SCHMERSAL
Safety Switch, with Separate Actuator, 2NC, Screw Connection The Series AZ1...

Disclaimer

Any product names, logos, brands, and other trademarks or media featured or referred to on IPC Station are the property of their respective owners.

GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.

All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.

IPC Station is a GID Industrial website.
GID Industrial Logo
Copyright © 2021 GID Industrial, All Rights Reserved.
Page generated in 0.041 seconds.