Ver.2.10 High-speed IEEE-488.2 GPIB Interface Board for PCI GP-IB(PCI)F, GP-IB(PCI)FL These products are PCI bus-compliant interface board with support for bus master operation and which complies with IEEE-488.1 and IEEE-488.2. The card can be used in a PC to control communications with devices that support the GPIB interface and perform GPIB bus line data analysis. You can use the supplied driver library to develop application software using any programming language that supports the Win32 API routines (such as Visual Basic or Visual C++), or using LabVIEW. Bus analyzer Model Name function High-performance & High-speed IEEE-488.2 GPIB GP-IB(PCI)F Ο Interface Board GP-IB(PCI)FL Low Price & High-speed IEEE-488.2 GPIB Interface Board None * Specifications, color and design of the products are subject to change without notice. Features Complies with the IEEE-488.2 standard Other As the card complies with the IEEE-488.2 standard, you can A function is provided to read all control lines and data lines. control any external device that supports this standard. This enables various operations to be performed from the application. [Includes control line latch function. Data lines Data transfer speed 1.5Mbyte/sec max. are only supported on the GP-IB(PCI)F.] The maximum data transfer speed for communications is 1.5Mbyte/sec. Specification Supports bus master operation The bus master data transfer function enables large quantities Encoder Input Section of data to be transferred between the board and PC without Item GP-IB(PCI)F GP-IB(PCI)FL GPIB loading the CPU. 1ch Number of channel Internal 2Kbyte FIFO buffers for send and receive Conforms to IEEE-488.1, 488.2(GPIB)standards Transfer format 8-bit parallel, 3-wire handshake system The board has separate 2Kbyte FIFO buffers for sending and Transfer rate 1.5Mbyte/sec receiving data, allowing both small and large volumes of data to Data buffer size 2Kbyte send, 2Kbyte receive be transferred at high speed. Negative logic Signal logic L level : 0.8V or less, Interface messages also use a FIFO to enable high-speed H level : 2.0V or more Cable length between device 4m or less transmission. Total cable length 20m or less Connectable number of Built-in GPIB bus analyzer function 15 devices (Max.) device The board features a bus analyzer function. [GP-IB(PCI)F] 64K data points This not only allows the signals on the GPIB bus to analyzed, Analyzer buffer size (1 data point: Control None signals + DIO1 to 8) but also permits signal analysis to be performed while the Bus master section board is performing GPIB communications DMA channels 2ch Transfer bus width 32-bit Built-in SPAS event function Transfer data length 8 PCI Words length (Max.) In addition to the functions of the earlier GPIB controller Transfer rate 80Mbyte/sec Scatter/Gather function 64Mbyte/ch (μPD7210), the board also supports the SPAS event generated Common section when a serial poll occurs. This gives you a high level of I/O address Any 128-byte boundary flexibility in constructing your system. Interrupt 1 level use Consumed current 5VDC 400mA (Max.) Internal high-precision timer Operating conditions 0 - 50°C, 10 - 90%RH (No condensation) PCI bus specification 32-bit, 33MHz, Universal key shapes supported *1 The board includes a high-precision application timer to allow Physical dimensions(mm) 121.69(L) x 63.41(H) accurate time monitoring to be performed under Windows. Weight 110g *1 This board requires power supply at +5 V from an expansion slot (it does not work on a Long term availability machine with a +3.3 V power supply alone). As the board uses a high-speed GPIB controller developed by CONTEC (upwardly compatible with the μPD7210), reliable long term availability is ensured. Diagnostic program A diagnostic program is supplied to support system development. The diagnostic program can be used to check hardware operation (interrupts and I/O addresses) and to perform simple communication tests with connected devices. GP-IB(PCI)F, GP-IB(PCI)FL 1 Ver.2.10 Board Dimensions (module) for each kernel version, and the board (PC Cards) configuration program (config). CONTEC provides download services (at 121.69(L) 121.69(L) http://www.contec.com/apipac/) to supply the updated drivers and differential files. For details, read Help on the bundled CD-ROM or visit the CONTEC’s Web site. < Operating environment > OS RedHatLinux, TurboLinux, etc.. (For details on supported distributions, [mm] [mm] refer to Help available after installation.) The standard outside dimension (L) is the distance from the end of the board to Adaptation language gcc, etc.. the outer surface of the slot cover. Cable & Connector Support Software Cable (Option) NOTE: GPIB cable (2m) : PCN-T02 This hardware does not support Windows 95 and Windows NT4.0/3.51. GPIB cable (4m) : PCN-T04 Connector (Option) Driver Library API-PAC(W32) (Bundled) GPIB Connector : CN-GP/C API-PAC(W32) is the library software that provides the Effective when the cable being plugged into commands for CONTEC hardware products in the form of the board interfere with the PC’s main unit. Windows standard Win32 API functions (DLL). It makes it easy to create high-speed application software taking * Check the CONTEC’s Web site for more information on these options. advantage of the CONTEC hardware using various Packing List programming languages that support Win32 API functions, such as Visual Basic and Visual C++. Board (One of the following) It can also be used by the installed diagnosis program to check [GP-IB(PCI)F, or GP-IB(PCI)FL] …1 hardware operations. First step guide … 1 CONTEC provides download services (at CD-ROM *1 [API-PAC(W32)] …1 http://www.contec.com/apipac/) to supply the updated drivers and differential files. *1 The CD-ROM contains the driver software and User’s Guide. For details, read Help on the bundled CD-ROM or visit the CONTEC’s Web site. How to connect the connectors < Operating environment > OS Windows XP, Server 2003, 2000, Me, 98, Connector shape etc.. To connect an external device to this board, plug the cable from Adaptation language Visual C++ .NET, Visual C# .NET, Visual the device into the interface connector (CN1) shown below. Basic .NET, Visual C++, Visual Basic, Delphi, C++Builder, etc.. API-GPLV(W32) library supporting LabVIEW (Supplied: Stored on the API-PAC(W32) CD-ROM) API-GPLV(W32) is a driver created according to the National 1 13 1 13 Instruments Corporation’s GPIB function style. The driver is software to control the CONTEC GPIB board (PC Cards) using a LabVIEW-based GPIB system or existing application CN1 CN1 program. It can also be used by the installed diagnosis program to check 12 12 24 24 hardware operations. CONTEC provides download services (at http://www.contec.com/gplv/) to supply the updated drivers and GP-IB(PCI)F, GP-IB(PCI)FL GP-IB(LPCI)F, GP-IB(LPCI)FL differential files. On-board connector : 555139-1(AMP) Applicable connector(cable): GPIB cable(IEEE-488 rated) For details, read Help on the bundled CD-ROM or visit the CONTEC’s Web site. * Please refer to page 2 for more information on the supported cable and accessories. < Operating environment > OS Windows XP, Server 2003, 2000, Me, 98, Connector shape etc.. Adaptation language LabVIEW, Visual C++ .NET, Visual Data bus DIO1 1 13 DIO5 Data bus Data bus DIO2 2 14 DIO6 Data bus C# .NET, Visual Basic .NET, Visual C++, Data bus DIO3 3 15 DIO7 Data bus Data bus DIO4 4 16 DIO8 Data bus Visual Basic, Delphi, C++Builder, etc.. Management bus(End or Identify) EOI 5 17 REN(Remote Enable)Management bus (Data Valid) DAV GND (Ground) 6 18 Handshake (Not Ready for Data) NRFD GND (Ground) 7 19 bus (Not Data Accepted) NDAC GND (Ground) 8 20 Linux version of general-purpose count driver: (Interface Clear) IFC GND (Ground) 9 21 (Service Request) SRQ GND (Ground) Management bus 10 22 API-GPIB(LNX) (Attention) ATN 11 23 GND (Ground) (Ground) GND 12 24 Logic GND (Supplied: Stored on the API-PAC(W32) CD-ROM) This driver is used to control CONTEC GPIB boards (PC CN1 Cards) from within Linux. You can control CONTEC GPIB boards easily using the shared library called from the user application, the device driver GP-IB(PCI)F, GP-IB(PCI)FL 2 63.41(H) 63.41(H)