VMC 1100 - NEXCOM - IPC Station

Description

7" All-In-One Vehicle Computer with Touch Screen and Multifunctional Tracker
VMC 1100, a new generation 7-inch vehicle mount computer with dual core Intel® Atom™ processor, is designed for transportation applications requiring real-time vehicle tracking. Adopting the latest low power consumption processor and integrating a WVGA LCD with a brightness of 400nits and a 4-wire resistive touch sensor, VMC 1100 does not compromise with its space to sacrifice its functional features. It provides dual CANbus, RS-232, RS-485, USB 3.0, GPIO, analog input, PWM and LAN signal. For security, VMC 1100 supports real-time vehicle tracking through GPS and SMS/GSM/GPRS. VMC 1100 can also be upgraded to a different LCD resolution and include other features such as LTE, projected capacitive touch, CANbus protocol support and backup battery.

Part Number

VMC 1100

Price

Request Quote

Manufacturer

NEXCOM

Lead Time

Request Quote

Category

Mobile Computing » Vehicle Mount Computers

Specifications

General

Cooling System: Fanless
Enclosure: Plastic PC + ABS with aluminum die casting heatsink
Mounting: Support VESA 75, stand mounting
Four SMA Type antenna connectors of BT/Wi-Fi/WWAN/GPS
Power Input: 9 ~ 36VDC input with Ignition
Power Consumption: 26W
Ingress Protection: Front panel IP54
Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9")
Weight: TBD

LCD Panel

7-inch TFT LCD Panel with LED Backlight
800 x 480 pixels (WVGA)
Brightness: 400 cd/m² (typical)
Contrast ratio: 600:1 (typical)

Touch Screen Sensor

4-wire resistant touch
Anti-glare coating surface
Transmission rate: 78 ± 3%

CPU & Chipset

Intel® Atom™ Dual Core E3825 1.33GHz

Memory

One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB)- Default 2GB

Expandable Storage

1 x SATAIII SATA DOM Slot (available option 16G and 32G)

Expansion

1 x Half mini-PCIe socket (PCIe + USB) for WLAN option
1 x mini-PCIe socket ((USB + UART) for WWAN option)
1 x External module for OBD/Battery module option(UART + USB)

I/O Interface-Front

F1 ~ F5 functions key
Light Sensor
Internal Mic-in
2 x Built-in 2W speakers
3 x LED indicators (Power mode, Storage and WWAN status)

I/O Interface-Lateral

Right side- 1 x Micro SD card socket- 1 x SIM card socket- 1 x USB 3.0 host type A connector- 1 x Mic-in, Line-out
Left side- 1 x Power button- 1 x System reset button- Volume up/down or Brightness up/dow

I/O Interface-Rear

1 x 5-pin Circular connector for Power/Ignition input
1 x RJ45 for LAN
1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A)
1 x DB9 (Male) for- RX/TX or RS-485- 2 x CAN Bus 2.0
1 x DB15 (Female) for- GPS dead reckoning interface (optional)- 2 x PWM, 2 x Analog Input, 3 x GPO, 3 x GPIAnalog Input requirement for Voltages are measuredChannel: 8Voltage range: 0 ~ 38VResolution: 8 bitAnalog Input requirement for Frequency, SpeedSquare waveFrequency signal offset voltage range: 0 ~ 15VDCProtection: +/- 500V spikeFrequency signal duty cycle range: 10% ~ 90%

Communication Module

1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou)
1 x WLAN or Bluetooth module for optional
1 x WWAN module for optional

Power Management

Selectable boot-up & shut-down voltage for low power protection
HW design ready for 8-level delay time on/off at user's self configuration
Power on/off ignition, software detectable
Support S3 and S4 suspend mode; wake on RTC and SMS

Operating System

Windows 8 Professional, WES8
Windows 7, WES7
Linux Fedora (kernel V3.2.0)

Environment

Operating temperatures: Ambient with air -20°C to 60°C
Storage temperatures: -30°C to 80°C
Relative humidity: 10% to 95% (non-condensing)
Vibration (random): 3g @5 ~ 500Hz
VibrationOperating: MIL-STD-810G, 514.6 Procedure 1, Category 4Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
ShockOperating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20gCrash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g

Power Design & Protection

Load dump and inductive load protection
Cold cranking protection
Transient voltage protection
Electrostatic discharge protection

Standards/Certifications

EMC- CE, FCC class B, eMark
Power- SAE J1113- SAE J1455- ISO 7637-2
Safety- EN 60950-1 LVD

Categorization Information

Mobile Computing Solutions
Vehicle Mount Computer

Features

7" WVGA TFT LCD Monitor with resistor touch screen
Built-in Intel® Atom™ Dual Core E3825 1.33GHz
Compact and fanless design
On screen F1 ~ F5 function key
Support GPS/GPRS/GSM tracker function
Built-in GPS (Option: Dead Reckoning Support)
Variety wireless communication options (Support LTE)
Dual CAN bus support and support option OBDII (SAE J1939)
Wide Range DC input from 9 ~ 36V
SAE J1113, ISO7637-2 and SAE J1455 conformity for power design

Datasheet

8eb117ec-a668-47da-8b43-e9aaf7c1e32d.pdf

1251 KiB

Download

Extracted Text

7" All-In-One Vehicle Computer VMC 1100 with Touch Screen and Multifunctional Tracker Main Features 7" WVGA TFT LCD Monitor with resistor touch screen Built-in GPS (Option: Dead Reckoning Support) ® Built-in Intel Atom™ Dual Core E3825 1.33GHz Variety wireless communication options (Support LTE) Compact and fanless design Dual CAN bus support and support option OBDII (SAE J1939) On screen F1 ~ F5 function key Wide Range DC input from 9 ~ 36V Support GPS/GPRS/GSM tracker function SAE J1113, ISO7637-2 and SAE J1455 conformity for power design Product Overview ® VMC 1100, a new generation 7-inch vehicle mount computer with dual core Intel Atom™ processor, is designed for transportation applications requiring real-time vehicle tracking. Adopting the latest low power consumption processor and integrating a WVGA LCD with a brightness of 400nits and a 4-wire resistive touch sensor, VMC 1100 does not compromise with its space to sacrifice its functional features. It provides dual CANbus, RS-232, RS-485, USB 3.0, GPIO, analog input, PWM and LAN signal. For security, VMC 1100 supports real-time vehicle tracking through GPS and SMS/GSM/GPRS. VMC 1100 can also be upgraded to a different LCD resolution and include other features such as LTE, projected capacitive touch, CANbus protocol support and backup battery. Specifications Expandable Storage General 1 x SATAIII SATA DOM Slot (available option 16G and 32G) Cooling System: Fanless Enclosure: Plastic PC + ABS with aluminum die casting heatsink Expansion Mounting: Support VESA 75, stand mounting 1 x Half mini-PCIe socket (PCIe + USB) for WLAN option Four SMA Type antenna connectors of BT/Wi-Fi /WWAN/GPS 1 x mini-PCIe socket ((USB + UART) for WWAN option) Power Input: 9 ~ 36VDC input with Ignition 1 x External module for OBD/Battery module option (UART + USB) Power Consumption: 26W Ingress Protection: Front panel IP54 I/O Interface-Front Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9") F1 ~ F5 functions key Weight: TBD Light Sensor Internal Mic-in LCD Panel 2 x Built-in 2W speakers 7-inch TFT LCD Panel with LED Backlight 3 x LED indicators (Power mode, Storage and WWAN status) 800 x 480 pixels (WVGA) Brightness: 400 cd/m² (typical) I/O Interface-Lateral Contrast ratio: 600:1 (typical) Right side - 1 x Micro SD card socket Touch Screen Sensor - 1 x SIM card socket 4-wire resistant touch - 1 x USB 3.0 host type A connector Anti-glare coating surface - 1 x Mic-in, Line-out Transmission rate: 78 ± 3% Left side CPU & Chipset - 1 x Power button ® Intel Atom™ Dual Core E3825 1.33GHz - 1 x System reset button - Volume up/down or Brightness up/dow Memory One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB) - Default 2GB Vehicle Mount Computer www.nexcom.com Dimension Drawing 75.00 DC IN 9-36V LAN RS-232 RS-232/ RS-485+CAN GPIO/ADC/PWM 212.97 40.00 49.30 50.00 I/O Interface-Rear Environment Operating temperatures: Ambient with air -20°C to 60°C 1 x 5-pin Circular connector for Power/Ignition input Storage temperatures: -30°C to 80°C 1 x RJ45 for LAN Relative humidity: 10% to 95% (non-condensing) 1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A) Vibration (random): 3g @5 ~ 500Hz 1 x DB9 (Male) for Vibration - RX/TX or RS-485 Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4 - 2 x CAN Bus 2.0 Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24 1 x DB15 (Female) for Shock - GPS dead reckoning interface (optional) Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and - 2 x PWM, 2 x Analog Input, 3 x GPO, 3 x GPI semi-trailers=20g Analog Input requirement for Voltages are measured Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground Channel: 8 equipment=75g Voltage range: 0 ~ 38V Power Design & Protection Resolution: 8 bit Load dump and inductive load protection Analog Input requirement for Frequency, Speed Cold cranking protection Transient voltage protection Square wave Electrostatic discharge protection Frequency signal offset voltage range: 0 ~ 15VDC Protection: +/- 500V spike Standards/Certifications Frequency signal duty cycle range: 10% ~ 90% EMC - CE, FCC class B, eMark Communication Module Power 1 x u-blox NEO-M8N module - SAE J1113 (support GPS/Gloness/QZSS/Galileo/Beidou) - SAE J1455 1 x WLAN or Bluetooth module for optional - ISO 7637-2 1 x WWAN module for optional Safety - EN 60950-1 LVD Power Management Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self Ordering Information configuration VMC 1100 (P/N: 10VC0110000X0) Power on/off ignition, software detectable 7" All-In-One Vehicle Computer with Touch Screen and Multifunctional Support S3 and S4 suspend mode; wake on RTC and SMS ® Tracker and Intel Atom™ Dual Core E3825 1.33GHz processor with Operating System 2GB DDR3L, GPS module and GPS antenna Windows 8 Professional, WES8 Bundle Accessories Windows 7, WES7 External Power cable (13cm) Linux Fedora (kernel V3.2.0) Driver CD Vehicle Mount Computer We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 11/16/2015 144.97 75.00

Frequently asked questions

IPC Station' parent company, GID Industrial, specializes in procuring industrial parts. We have years of experience finding rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. It is possible for some parts to be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have our own accounts, but we can also use yours if you would prefer. However, we can use other carriers if it will be more convenient for you.

IPC Station will definitely serve you. In fact, much of our business is international, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by IPC Station. We can also accept wire transfers and PayPal, or a check if you're in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products