Manufacturers
NEXCOM VMC 100
Description
7" All-In-One Vehicle Computer with ARM® Cortex®-A8 and OBD Multiprotocol
VMC 100, a 7-inch all in one vehicle computer, is designed for the cost-effective solution for transportation application. Same as all VMC series, the fanless and wide temperature support are reserved in VMC 100 design. VMC 100 adopts Linux and Android system with Cortex®-A8 processor, it integrates the high resolution LCD with the brightness of 400 nits and 4-wire resistive touch sensor. VMC 100 is equipped with Bluetooth, Wi-Fi and WWAN for option, provide the connection capability for real-time communication. It provides RS-232/422/485, USB 2.0, GPIO and LAN signal to link with the peripherals. Its mounting hole is compatible with VESA75 and can be installed in the vehicle with limited space via RAM mount kits.
Part Number
VMC 100
Price
Request Quote
Manufacturer
NEXCOM
Lead Time
Request Quote
Category
Mobile Computing » Vehicle Mount Computers
Specifications
General
Cooling System: Fanless
Enclosure: Plastic PC + ABS
Mounting: Support VESA 75, stand mounting
Four SMA Type antenna connectors of BT/Wi-Fi /WWAN/GPS
Power Input: 9 ~ 36VDC input with Ignition
Power Consumption: 15W
Ingress Protection: Front panel IP54
Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9")
Weight: TBD
LCD Panel
7-inch TFT LCD Panel with LED Backlight
800 x 480 pixels (WVGA)
Brightness: 400 cd/m² (typical)
Contrast ratio: 600:1 (typical)
Touch Screen Sensor
4-wire resistant touch
Anti-glare coating surface
Transmission rate: 78 ± 3%
CPU & Chipset
ARM® Cortex®-A8 Processor with 800MHz frequency
Memory
On-board DDR3 512MB
Expandable Storage
1 x Micro SDHC Slot (Bundle with 8GB)
Expansion
1 x Pin Head for WLAN option
1 x mini-PCIe socket ((USB + UART) for WWAN option)
OBD option and support protocols- SAE J1939
Battery module option
I/O Interface-Front
F1 ~ F5 functions key
Light Sensor
Internal Mic-in
2 x Built-in 2W speakers
3 x LED indicators (Power mode, Storage and WWAN status)
I/O Interface-Lateral
Right side- 1 x Micro SD card socket- 1 x SIM card socket- 1 x USB 2.0 host type A connector- 1 x Mic-in, Line-out
Left side- 1 x Power button- 1 x System reset button- Volume up/down or Brightness up/dow
I/O Interface-Rear
1 x 5-pin Circular connector for Power/Ignition input
1 x RJ45 for LAN
1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A)
1 x DB9 (Male) for- RS-485- 2 x CAN Bus 2.0
1 x DB15 (Female) for- GPS dead reckoning interface (optional)- 3 x GPO, 3 x GPI
Communication Module
1 x On board GPS module
1 x WLAN or Bluetooth module for optional
1 x WWAN module for optional
Power Management
Selectable boot-up & shut-down voltage for low power protection
HW design ready for 8-level delay time on/off at user's self configuration
Power on/off ignition, software detectable
Operating System
Linux Ubuntu (kernel V3.2.0)
Environment
Operating temperatures: Ambient with air -20°C to 60°C
Storage temperatures: -30°C to 80°C
Relative humidity: 10% to 90% (non-condensing)
Vibration (random): 3g @5 ~ 500Hz
VibrationOperating: MIL-STD-810G, 514.6 Procedure 1, Category 4Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
ShockOperating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20gCrash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g
Power Design & Protection
Load dump and inductive load protection
Cold cranking protection
Transient voltage protection
Electrostatic discharge protection
Standards/Certifications
EMC- CE, FCC class B
Safety- EN 60950-1 LVD
Categorization Information
Mobile Computing Solutions
Vehicle Mount Computer
Features
- 7" WVGA TFT LCD Monitor with resistor touch screen
- ARM® Cortex®-A8 Processor with 800MHz frequency
- Compact and fanless design
- On screen F1 ~ F5 function key
- Support Linux and Android system
- Built-in GPS (Option: Dead Reckoning Support)
- Variety wireless communication options (Support LTE)
- Dual CAN bus support and support option OBDII (SAE J1939)
- Wide Range DC input from 9 ~ 36V
Datasheet
Extracted Text
7" All-In-One Vehicle Computer ® ® VMC 100 with ARM Cortex -A8 and OBD Multiprotocol Main Features 7" WVGA TFT LCD monitor with resistor touch screen Built-in GPS (option: dead reckoning support) ® ® ARM Cortex -A8 Processor with 800MHz frequency Variety wireless communication options (support LTE) Compact and fanless design Dual CAN bus support and support option OBDII (SAE J1939) On screen F1 ~ F5 function key Wide Range DC input from 9 ~ 36V Support Linux and Android system Product Overview VMC 100, a 7-inch all in one vehicle computer, is designed for the cost-effective solution for transportation application. Same as all VMC series, the fanless ® and wide temperature support are reserved in VMC 100 design. VMC 100 adopts Linux and Android system with Cortex -A8 processor, it integrates the high resolution LCD with the brightness of 400 nits and 4-wire resistive touch sensor. VMC 100 is equipped with Bluetooth, Wi-Fi and WWAN for option, provide the connection capability for real-time communication. It provides RS-232/422/485, USB 2.0, GPIO and LAN signal to link with the peripherals. Its mounting hole is compatible with VESA75 and can be installed in the vehicle with limited space via RAM mount kits. Specifications General Expandable Storage Cooling System: Fanless 1 x Micro SDHC Slot (Bundle with 8GB) Enclosure: Plastic PC + ABS Expansion Mounting: Support VESA 75, stand mounting 1 x Pin Head for WLAN option Four SMA Type antenna connectors of BT/Wi-Fi /WWAN/GPS 1 x mini-PCIe socket ((USB + UART) for WWAN option) Power Input: 9 ~ 36VDC input with Ignition OBD option and support protocols Power Consumption: 15W - SAE J1939 Ingress Protection: Front panel IP54 Battery module option Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9") Weight: TBD I/O Interface-Front F1 ~ F5 functions key LCD Panel Light Sensor 7-inch TFT LCD Panel with LED Backlight Internal Mic-in 800 x 480 pixels (WVGA) 2 x Built-in 2W speakers Brightness: 400 cd/m² (typical) 3 x LED indicators (Power mode, Storage and WWAN status) Contrast ratio: 600:1 (typical) I/O Interface-Lateral Touch Screen Sensor Right side 4-wire resistant touch - 1 x Micro SD card socket Anti-glare coating surface - 1 x SIM card socket Transmission rate: 78 ± 3% - 1 x USB 2.0 host type A connector CPU & Chipset - 1 x Mic-in, Line-out ® ® ARM Cortex -A8 Processor with 800MHz frequency Left side - 1 x Power button Memory - 1 x System reset button On-board DDR3 512MB - Volume up/down or Brightness up/dow Vehicle Mount Computer www.nexcom.com Dimension Drawing 75.00 40.00 212.97 49.30 Shock I/O Interface-Rear 1 x 5-pin Circular connector for Power/Ignition input Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g 1 x RJ45 for LAN 1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A) Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground 1 x DB9 (Male) for equipment=75g - RS-485 Power Design & Protection - 2 x CAN Bus 2.0 Load dump and inductive load protection 1 x DB15 (Female) for Cold cranking protection - GPS dead reckoning interface (optional) Transient voltage protection - 3 x GPO, 3 x GPI Electrostatic discharge protection Communication Module Standards/Certifications 1 x On board GPS module EMC 1 x WLAN or Bluetooth module for optional - CE, FCC class B 1 x WWAN module for optional Safety Power Management - EN 60950-1 LVD Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self configuration Ordering Information Power on/off ignition, software detectable VMC 100-A1U (P/N: 10VC0010000X0) Operating System ® 7" All-In-One Vehicle Computer with Touch Screen and ARM Linux Ubuntu (kernel V3.2.0) ® Cortex -A8 800MHz Processor with 512MB DDR3, GPS, Dual CAN Bus 2.0B, Linux Ubuntu OS Environment Operating temperatures: Ambient with air -20°C to 60°C Bundle Accessories Storage temperatures: -30°C to 80°C Driver CD Relative humidity: 10% to 90% (non-condensing) GPS antenna Vibration (random): 3g @5 ~ 500Hz Vibration Multi-I/O cable Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4 External Power cable (13cm) Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24 Vehicle Mount Computer We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 11/16/2015 144.97 75.00
Frequently asked questions
Why choose IPC Station?
What is IPC Station' warranty policy for the VMC 100?
What carriers does IPC Station use to ship parts?
Does IPC Station sell to international (non-USA) customers?
What methods of payment does IPC Station accept?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods