IPC Station

Description

PICMG 1.3 Full-size SBC with Intel® Q87 Support 4th Generation Intel® Core™ i7/i5/i3 Processors
The PEAK 887VL2 is a PICMG1.3 Full-size single computing board featuring Intel® Q87 PCH chipset supports 4th generation Intel® Core™ processor with Dual DDR3L DIMM socket up to 16GB DDR3 1333/ 1600MHz SDRAM with Non-ECC support and integrated HD Graphic controller.

Part Number

PEAK 887VL2

Price

Request Quote

Manufacturer

NEXCOM

Lead Time

Request Quote

Category

Industrial Rackmount Computers » PICMG 1.0/1.3 SBCs

Specifications

CPU Support

4th generation Intel® Core™ i7/i5/i3 processor (95W/ 65W/ 45W/ 35W) TDPs, Socket LGA 1150

Main Memory

2 x DIMM, support Dual channel DDR3L (default)/ DDR3 NON-ECC DIMM (dual voltage models by auto detection for DDR3 and DDR3L
Maximum 16 GB – 1066/1333/1600 MT/S

Platform Control Hub

Intel® Q87 Express Chipset PCH

BIOS

AMI system BIOS
16MBit SPI depended on AMT function
Dual BIOS for Four PCIex1 and One PCIex4 (setting by DP switch)

Display

The Processor Graphics contains a refresh of the seventh generation graphics
Intel® HD Graphics GT1 / GT2
Share system memory
Analog Display Support
Drive a standard progressive scan analog monitor

Audio

Reverse HDA interface, 2.0mm 2x5 pin header

On-board LAN

1x Intel® I217LM GbE PHY
1x Intel® I211 Gigabit Ethernet Controller
RJ45 with LED connecter x 2
Support Boot From LAN (PXE)
RJ45 LED
Support Wake on LAN
Extra (External) LED: 2 x 4 pin header

I/O Interface

ITE8783
PS2 KB/MS reserve 1x6 (2.0m) JST connector
26-pin Box Header x 1 (2.0mm)
SIO Box Header x 4 (2.0mm), COM1,3,4 support RS232, COM2
RS232/422/485, RI pin can be select RI/5V/12V with jumper (2x3 pin 2.0mm pin-header)
4 Ports USB 2.0 and 4 ports USB 3.0:2 ports through 2.5mm JST Connectors, located near Rear Side of PCB (near CPU, USB3.0)4 ports throughbackplane (USB 2.0)
2 ports through I/O bracket (USB 3.0)
4-pin FAN connector x 2 (for CPU,System)
On board pin header for IrDA Tx Rx 1x5/2.54mm pin-header
HDD LED/ Power LED/ Power ON SW/ Reset SW
On Board buzzer
USBx1/ USBx1/ LAN1 RJ45 x1/ LAN2 RJ45 x1/ VGA DB15 from top to down

Power Requirements

Power source from Backplane through Golden Finger and AUX +12V
Support ATX/AT function by jumper setting
BIOS default is (ATX MODE)

Dimensions

338.58mm x 126.39mm, 8 layers (single side)

Environment

Board Level Operating temperatures: -15°C to 60°C
Storage temperatures: -20°C to 85°C
Relative humidity:10% to 90% (operating, non-condensing)5% to 95% (non-operating, non-condensing)

Certifications

CE approval
FCC Class A
CB/CCC certification

Categorization Information

IoT Automation Solutions
Industrial Rackmount Computer
PICMG 1.0/1.3 SBC

Features

Scalable platform 4th generation Intel® Core™ i7/i5/i3 processor + Non-ECC
Intel® Q87 PCH chipset support PICMG 1.3 specification
Support Dual channel DDR3L with NON-ECC DIMMs 1333/1600MHz up to 16GB
Support PCIex16, 4x PCIex1, 4x USB 3.0/ 4x USB 2.0, 4x SATA 3.0/ 2x SATA 2.0 and GbE
Display support for VGA, DVI, HDMI
Dimension 338.58 x 126.39 mm2 (W x L) (8 Layers Single side)

Datasheet

457d67e8-5400-4e2f-92ca-89581f406f45.pdf

554 KiB

Download

Extracted Text

® PICMG 1.3 Full-size SBC with Intel Q87 ® Support 4th Generation Intel Core™ i7/i5/i3 Processors PEAK 887VL2 Main F Main Features eatures ® Support PCIex16, 4 x PCIex1, 4 x USB3.0/4 x USB2.0, 4 x SATA 3.0/ Scalable platform 4th generation Intel Core™ i7/i5/i3 processor + 2 x SATA 2.0 and GbE Non-ECC ® Display support for VGA, DVI, HDMI Intel Q87 PCH chipset support PICMG 1.3 specification 2 Dimension 338.58 x 126.39mm (W x L) (8 Layers Single side) Support Dual channel DDR3L with NON-ECC DIMMs 1333/1600MHz up to 16GB Product Overview ® ® The PEAK 887VL2 is a PICMG1.3 Full-size single computing board featuring Intel Q87 PCH chipset supports 4th generation Intel Core™ processor with Dual DDR3L DIMM socket up to 16GB DDR3 1333/1600MHz SDRAM with Non-ECC support and integrated HD Graphic controller. ® The Intel Q87 PCH manages SATA 2.0/3.0 Ports. Furthermore, it supports others versatile I/O ports such as legacy four series ports, KB/Mouse ® interface, optional TPM function, eight USB ports, four PCI express x1 interface and two Intel PCI express Gigabit LAN port. It offers a great solution for advance industrial application that requires superb display and processing performance. Specifications CPU Support On-board LAN ® ® 4th generation Intel Core™ i7/i5/i3 processor (95W/ 65W/ 45W/ 35W) 1 x Intel I217LM GbE PHY ® TDPs, Socket LGA1150 1 x Intel I211 Gigabit Ethernet Controller RJ45 with LED connecter x 2 Main Memory Support Boot From LAN (PXE) 2 x DIMM, support Dual channel DDR3L (default)/DDR3 NON-ECC RJ45 LED DIMM (dual voltage models by auto detection for DDR3 and DDR3L Support Wake on LAN Maximum 16 GB – 1066/1333/1600 MT/S Extra (External) LED: 2 x 4 pin header Platform Control Hub I/O Interface ® Intel Q87 Express Chipset PCH ITE8783 PS2 KB/MS reserve 1 x6 (2.0m) JST connector BIOS 26-pin Box Header x 1 (2.0mm) AMI system BIOS SIO Box Header x 4 (2.0mm), COM1,3,4 support RS232, COM2 16MBit SPI depended on AMT function RS232/422/485, RI pin can be select RI/5V/12V with jumper (2 x 3 pin Dual BIOS for Four PCIex1 and One PCIex4 (setting by DP switch) 2.0mm pin-header) Display 4 Ports USB2.0 and 4 ports USB3.0: The Processor Graphics contains a refresh of the seventh generation 2 ports through 2.5mm JST Connectors, located near Rear Side of graphics PCB (near CPU, USB3.0) ® Intel HD Graphics GT1/GT2 4 ports through backplane (USB2.0) Share system memory 2 ports through I/O bracket (USB3.0) Analog Display Support 4-pin FAN connector x 2 (for CPU,System) Drive a standard progressive scan analog monitor On board pin header for IrDA Tx Rx 1 x5/2.54mm pin-header HDD LED/Power LED/Power ON SW/ Reset SW Audio On Board buzzer Reverse HDA interface, 2.0mm 2 x 5 pin header PICMG 1.3 www.nexcom.com Block Diagram VR12.5 VCCIN Maximum support 16GB DDR3 CHA DDR3 1066/1333/1600 MT/s DIMM1 PCIEx 16 Repeater PEG[0:15] SLOT1 Haswell (DT) DDR3 CHB DDR3 1066/1333/1600 MT/s DIMM2 HDMI/DVI DP B FDI DMI HEADER FDI x 2 DMI x4 VGA FDI DMI CONNECTOR PCIe x 4 BUS(1~4) BP Connector SHB GFA PORT(1~2) (USB3.0 x 2) BOX Header PORT(3~4) IT 8892 PCI BUS PCI GF BUS(5) (USB3.0 x 2) Q87 only JST Connector Lynx point INTEL I217LM RJ45 Connector PORT4~PORT5 BUS(6) (USB2.0 x 2) GbE PHY (Q87/H81) JST Connector PORT6~PORT7 INTEL I211 (USB2.0 x 2) Q87 only BUS(7) RJ45 Connector GbE Controller Q87 only backplane PORT8~PORT11 (USB2.0 x 4) FP Connector SATA 0~1 (SATA3.0 x 2) PIN HEADER (2.54mm 2x5) LPC SPI FP Connector SATA 2~3 Q87 only (SATA3.0 x 2) backplane BIOS/ME SATA 4~5 (SATA3.0 x 2) SPI ROM H/W Monitor PS2 +3.3V, +5V, +12V, Vcore KB/MS JST Connector SUPER I/O IT8783E/AX-L COM1,2,3,4 BOX HEADER Parallel Port COM2 RS232/RS422/RS485 26-pin Header x 1 (2.0mm) USBx1/USBx1/LAN1 RJ45 x1/LAN2 RJ45 x1/VGA DB15 from top to Ordering Information down PEAK 887VL2 (P/N: 10P0887VL00X0) Power Requirements ® PICMG 1.3 Full-size SBC, 4th Generation Intel Core™ i7/i5/i3 processor, Power source from Backplane through Golden Finger and AUX +12V LGA1150, With Max 16GB, DDR3L/DDR3 DIMM, VGA integration, Support ATX/AT function by jumper setting ® Intel Gigabit Ethernet x2, USB3.0 x4, SATA 3.0 x4 BIOS default is (ATX MODE) Dimensions 338.58mm x 126.39mm, 8 layers (single side) Environment Board Level Operating temperatures: -15°C to 60°C Storage temperatures: -20°C to 85°C Relative humidity: 10% to 90% (operating, non-condensing) 5% to 95% (non-operating, non-condensing) Certifications CE approval FCC Class A CB/CCC certification PICMG 1.3 We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 05/19/2015 DP B DP C DP D PEG HDA USB 2.0(14) USB 3.0(4) VGA SATA 3.0(6) PCI-E *1 (8) DDR3 CH B DDR3 CH A

Frequently asked questions

IPC Station' parent company, GID Industrial, specializes in procuring industrial parts. We have years of experience finding rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. It is possible for some parts to be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have our own accounts, but we can also use yours if you would prefer. However, we can use other carriers if it will be more convenient for you.

IPC Station will definitely serve you. In fact, much of our business is international, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by IPC Station. We can also accept wire transfers and PayPal, or a check if you're in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products