NEXCOM PEAK 876VL2

Description
Intel® Core™ i5/ i3/ Pentium® LGA1156 with 2 x PCI Express Gigabit LAN/ 6 x SATA/ 8 x USB 2.0
PEAK 876VL2 is a PICMG 1.3 full-size Single Board Computer (SBC), which supports Intel® Core™ i5/ i3/ Pentium® processors with Hyper-Threading technology. The Intel® Core™ i5/i3/ Pentium® supports dual channel non-ECC DDR3 1066/ 1333 MHz memory in two DIMM slots and a Core™ i5/i3/ Pentium® integrated graphics controller. The Q57 Express Chipset PCH manages SATA HDD ports, parallel port.
Part Number
PEAK 876VL2
Price
Request Quote
Manufacturer
NEXCOM
Lead Time
Request Quote
Category
Industrial Rackmount Computers » PICMG 1.0/1.3 SBCs
Specifications
CPU Support
Intel® LGA1156, Core™ i5/ i3/ Pentium®
Main Memory
2 x 240-pin DIMM, for up to 8GB dual channel Non-ECC DDR3 1066/1333 SDRAM
Chipset
Intel® Q57 Express Chipset PCH
BIOS
AMI BIOS
Plug & Play support
Advanced Power Management and Advanced Configuration & Power Interface support
On-board LAN
1 x Intel® 82578DM PHY for AMT 6.0
1 x Intel® 82574L PCI Express Gigabit Ethernet
Support boot from LAN (PXE)
2 x RJ45 with LED
Display
Intel® Core™ i5/ i3/ Pentium® processors Integrated graphics
Analog display support up to 2048x1536 @ 75Hz for CRT I/O Interfaces
USB 2.0: 8 ports (2 on board, 4 to backplane), 2 ports through I/O Bracket
Serial port: 2 port, with 2x5pin headers (COM 1 and COM 2)
SATA HDD: 6 ports, Support RAID 0/1/5/10 and Intel® Matrix Storage
Parallel port: 1 x 26-pin connector
IrDA: 1 x 5-pin header
GPIO: Supports 4 sets general purpose I/O each with TTL level (5V) interface
On-board buzzer x 1
Power LED/Power On/Reset/SMBUS: 2 x 8 pin header
1 x 4-pin fan connector (for CPU); 1 x 3-pin fan connectors (for System)
IPMB interface through PICMG 1.3 Golden-finger
I/O On SBC Bracket; 1 x VGA DB-15 connector; 2 x RJ45 Gigabit Ethernet LAN port; 2 x USB 2.0 Ports
Watchdog Timer
1-minute increments from 1 to 255 minutes
1-second increments from 1 to 255 seconds
On-chip RTC with battery backup
1 x External Li-lon battery
System Monitor
6 Voltages (+3.3V, +5V, +12V, Vcore) memory, VTT
3 Temperatures (For CPU and System)
2 FAN speed monitors (1 for CPU and 2 for System FAN)
Dimensions
PICMG 1.3 SHB
Dimension: 338.58mm (L) x 126.39mm (W) (13.3" x 4.9")
Power Input
Power source from backplane through golden finger and AUX +12V
Support ATX/AT power supplies
+12V/ +5V/ +3.3V/ +5Vsb
Environment
Board level operating temperatures: 0°C to 60°C
Storage temperature: -20°C to 85°C
Relative humidity: 10% to 90%, (Non-condensing)
Certifications
CE approval
FCC Class A
Categorization Information
IoT Automation Solutions
Industrial Rackmount Computer
PICMG 1.0/1.3 SBC
Features
- Intel® Core™ i5/ i3/ Pentium Integrated Graphics
- Support Intel® LGA1156, Core™ i5/ i3/ Pentium®
- 1 x 82574 PCI Express Gigabit Ethernet
- 1 x 82578DM Gigabit Ethernet
- 6 x SATA, 8 x USB2.0, 2 x COM, 1 x Parallel
- Support Non-ECC Dual Channel DIMM-DDR3 1066/1333 MHz up to 8GB
- Intel® AMT 6.0
Datasheet
Extracted Text
® ® PICMG 1.3 Intel Core™ i5/i3/Pentium LGA1156 with PEAK 876VL2 Q57 2 x PCI Express Gigabit LAN/6 x SATA/8 x USB2.0 Main F Main Features eatures ® 6 x SATA, 8 x USB2.0, 2 x COM, 1 x Parallel Intel Core™ i5/i3/Pentium Integrated Graphics ® ® Support Non-ECC Dual Channel DIMM-DDR3 1066/1333 MHz Support Intel LGA1156, Core™ i5/i3/Pentium up to 8GB 1 x 82574 PCI Express Gigabit Ethernet ® Intel AMT 6.0 1 x 82578DM Gigabit Ethernet Product Overview ® ® PEAK 876VL2 is PICMG 1.3 full-size Single Board Computer (SBC), which supports Intel Core™ i5/i3/Pentium processors with Hyper-Threading technology. ® ® ® The Intel Core™ i5/i3/Pentium supports dual channel non-ECC DDR3 1066/1333 MHz memory in two DIMM slots and a Core™ i5/i3/Pentium integrated graphics controller. The Q57 Express Chipset PCH manages SATA HDD ports, parallel port. Furthermore, it supports other versatile I/O ports such as two ® ® serial ports, eight USB ports, and two PCI Express Gigabit LAN ports. The PEAK 876VL2, with Intel Core™ i5/i3/Pentium and PCI Express LAN, offers a great solution for advanced industrial application that requires superb display and processing performance. Specifications CPU Support Bracket ® ® Intel LGA1156, Core™ i5/i3/Pentium Serial port: 2 port, with 2 x 5pin headers (COM 1 and COM 2) ® SATA HDD: 6 ports, Support RAID 0/1/5/10 and Intel Matrix Storage Main Memory Parallel port: 1 x 26-pin connector 2 x 240-pin DIMM, for up to 8GB dual channel Non-ECC DDR3 IrDA: 1 x 5pin header 1066/1333 SDRAM GPIO: Supports 4 sets general purpose I/O each with TTL level (5 V) interface Chipset ® Intel Q57 Express Chipset PCH On-board buzzer x 1 Power LED/Power On/Reset/SMBUS: 2 x 8pin header BIOS 1 x 4pin fan connector (for CPU); 1 x 3pin fan connectors (for System) AMI BIOS IPMB interface through PICMG 1.3 Golden-finger Plug & Play support I/O On SBC Bracket Advanced Power Management and Advanced Configuration & Power 1 x VGA DB-15 connector Interface support 2 x RJ45 Gigabit Ethernet LAN port 2 x USB2.0 Ports On-board LAN ® 1 x Intel 82578DM PHY for AMT 6.0 Watchdog Timer ® 1 x Intel 82574L PCI Express Gigabit Ethernet 1 minute increments from 1 to 255 minutes Support boot from LAN (PXE) 1 second increments from 1 to 255 seconds 2 x RJ45 with LED On-chip RTC with battery backup Display 1 x External Li-lon battery ® ® Intel Core™ i5/i3/Pentium processors Integrated graphics System Monitor Analog display support up to 2048 x 1536 @ 75Hz for CRT 6 Voltages (+3.3V, +5V, +12V, Vcore) memory, VTT 3 Temperatures (For CPU and System) I/O Interfaces 2 FAN speed monitors (1 for CPU and 2 for System FAN) USB2.0: 8 ports (2 on board, 4 to backplane), 2 ports through I/O PICMG 1.3 www.nexcom.com Block Diagram DDR3 1066 / 1333 MHz Power Gen. DDR3 Channel A 3VSB AND 5VSB LGA1156 Processor Havendale PCI-E x16 Golden Finger x16 or 2 x8 DDR3 POWER 1.5V/0.75V DDR3 Channel B VTT DMI 1V05 2GB/s BIOS SPI VRD 11.1 VCORE SPI DMI FDI VGA CON PCI-E x1 LAN 2 VGA 1V8 82574 PCI-E x1 LAN1 82578DM PCH VAXG INTEL PCI-E x4 Golden Finger x4 or 4 x1 0 / 1 Q57 Breaket USB 2.0 2 / 3 Internal Conn. Golden Finger USB 2.0 Back Plane PCI Bus Golden Finger PCI BUS SATA LPC Clock SMBUS ADDRESS USB Ports x 4 MEMORY CHANNEL-A DIMM-0 0A0H~0A1H MEMORY CHANNEL-A DIMM-1 0A2H~0A3H SATAII MEMORY CHANNEL-B DIMM-0 0A4H~0A5H SATA Ports x 4 MEMORY CHANNEL-B SLOT-1 0A6H~0A7H CLOCK GEN. 0D2H Golden Finger CLOCK BUFFER 0DCH SATA Ports x 2 COM port x 2 KB/MS SUPER IO W83627HG Clock Gen. FAN AND SENSOR CK505 ICS9DB108 Print Port Dimensions Ordering Information PICMG 1.3 SHB PEAK 876VL2 (P/N:10P0876VL00X0) Dimension: 338.58mm (L) x 126.39mm (W) (13.3" x 4.9") ® ® PICMG 1.3 Full-Size SBC, Intel LGA1156, Core™ i5/i3/Pentium with Power Input Max 8GB, DDR3 DIMM, VGA Power source from backplane through golden finger and AUX +12V Support ATX/AT power supplies +12V/+5V/+3.3V/+5Vsb Environment Board level operating temperatures: 0°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: 10% to 90%, (Non-condensing) Certifications CE approval FCC Class A PICMG 1.3 We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 03/05/2014 DIMM 0 DIMM 0 USB 2.0 Display DDR3 Ch B DDR3 Ch A SATAI LPC Bus DMI BUS FDI BUS PCI-E x 16 PCI PCI-E x 4 PCI-E x 4 PCI-E x 8 PCI-E x 8
Frequently asked questions
Why choose IPC Station?

What is IPC Station' warranty policy for the PEAK 876VL2?

What carriers does IPC Station use to ship parts?

Does IPC Station sell to international (non-USA) customers?

What methods of payment does IPC Station accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

PICMG1.0 Full-size SBC with Intel® B75 Support Intel® 3rd generation Core™ i7/i5/i3 processors The P...

Intel® Core™ i7/ i5/ i3/ Pentium® LGA1156 with 2 x PCI Express Gigabit LAN/ 6 x SATA/ 8 x USB 2.0 PE...

PICMG 1.3 Full-size Single Computing Board with Intel® Q77 Single Computing Board Intel® 3rd Generat...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods