TECHNICAL DATASHEET PMC Panel Mount Power Supply 24V 150W 1 Phase / PMC-24V150W1AX PMC Highlights & Features – Universal AC input range from 85Vac to 264Vac without power de-rating – Full Aluminum casing for light weight and corrosion resistant handling – High MTBF > 700,000 hrs. as per Telcordia SR-332 – Overvoltage / Overcurrent / Over Temperature Protections – IP 20 Compliant (for PMC-24V150W1AJ) Safety Standards CB Certified for worldwide use Model Number: PMC-24V150W1AX Unit Weight: 0.48 kg Dimensions (L x W x D): 178 mm x 97 mm x 38 mm General Description The new Panel Mount Power Supply is the latest offering from one of the world’s largest power supply manufacturers and solution providers - Delta. The product range offers a nominal output voltage of 24V, a wide temperature range from -10°C to +70°C and a highly dependable minimum holdup time. The state-of-the-art design is made to withstand harsh industrial environments. What makes the product stands out from the crowd is its lightweight full aluminum body design which can withstand shock and vibration according to IEC60068-2. Delta’s Panel Mount Power Supply also offers overvoltage and overload protection. Using a wide input voltage range design, it is compatible worldwide. The input also includes DC operating voltage from 125-375Vdc. Best of all, this excellent design and quality does not come with a big price tag. Model Information PMC Panel Mount Power Supply Model Number Input Voltage Range Output Voltage Output Current PMC-24V150W1AX 85-264Vac (125-375Vdc) 24Vdc 6.25A Model Numbering PMC 24V 150W 1 A X A - Terminal Block PMC Series Output Voltage Output Power Single Phase Delta Standard Connector J - IP 20 Connector All parameters are specified at 25°C ambient unless otherwise noted. 1 www.DeltaPSU.com (March 2013, Rev. 00) TECHNICAL DATASHEET PMC Panel Mount Power Supply 24V 150W 1 Phase / PMC-24V150W1AX Specifications Input Ratings / Characteristics Nominal Input Voltage 100-240Vac Input Voltage Range 85-264Vac Nominal Input Frequency 50-60Hz Input Frequency Range 47-63Hz Nominal DC Input Voltage 125-250Vdc DC Input Voltage Range 125-375Vdc Input Current < 3.1A @ 115Vac, < 2.0A @ 230Vac Efficiency at 100% Load > 87% @ 115Vac, > 88% @ 230Vac Max Inrush Current < 60A @ 115Vac, < 120A @ 230Vac Power Factor NA Leakage Current < 1mA @ 240Vac Output Ratings / Characteristics Nominal Output Voltage 24Vdc Output Voltage Tolerance ± 2% (initial set point tolerance from factory) Output Voltage Adjustment Range 22-28Vdc Output Current 6.25A Output Power 150W Line Regulation < 0.5% typ. (@ 85-264Vac input, 100% load) Load Regulation < 1% typ. (@ 85-264Vac input, 0-100% load) PARD (20MHz) < 100mVpp Rise Time < 30ms @ nominal input (100% load) Start-up Time < 1000ms @ nominal input (100% load) Hold-up Time > 15ms @ 115Vac, > 80ms @ 230Vac (100% load) Dynamic Response (Overshoot & Undershoot O/P Voltage) ± 5% @ 0-100% load Start-up with Capacitive Loads 8,000µF Max Mechanical Case Cover Aluminium Dimensions (L x W x D) 178 mm x 97 mm x 38 mm Unit Weight 0.48 kg Indicator Green LED (DC OK) System Cooling Convection Terminal Input and Output PMC-24V150W1AA: M3.5 x 7 Pins (Rated 300V/15A) PMC-24V150W1AJ: M3.5 x 7 Pins (Rated 300V/20A) Wire PMC-24V150W1AA: AWG 22-14 PMC-24V150W1AJ: AWG 22-12 Noise Sound Pressure Level (SPL) <40dBA All parameters are specified at 25°C ambient unless otherwise noted. 2 www.DeltaPSU.com (March 2013, Rev. 00) TECHNICAL DATASHEET PMC Panel Mount Power Supply 24V 150W 1 Phase / PMC-24V150W1AX Environment Surrounding Air Temperature Operating -10°C to +70°C Storage -25°C to +85°C Power De-rating > 50°C de-rate power by 2.5% / °C Operating Humidity < 95% RH Operating Altitude 3,000 Meters Shock Test (Non-Operating) IEC60068-2-27, 30G (300m/S²) for a duration of 18ms 3 times per direction, 18 times in total Vibration (Non-Operating) IEC60068-2-6, 10Hz to 500Hz @ 50m/S² (5G peak); 20 min per axis for all X, Y, Z direction Pollution Degree 2 Protections Overvoltage < 32V ±10%, SELV output, Hicc-up Mode, Non-Latching (Auto recovery). Overload / Overcurrent > 120% of rated load current, Hicc-up Mode, Non-Latching (Auto recovery). Over Temperature < 75°C Ambient Temp@ 100% load, Non-Latching (Auto-recovery). Short Circuit Hicc-up Mode, Non-Latching (Auto-recovery when the fault is removed). Protection Against Shock Class I with PE* connection *PE: Primary Earth Reliability Data MTBF > 700,000 hrs, as per per Telcordia SR-332 Expected Cap Life Time 10 years (115Vac & 230Vac, 50% load @ 40°C) All parameters are specified at 25°C ambient unless otherwise noted. 3 www.DeltaPSU.com (March 2013, Rev. 00) TECHNICAL DATASHEET PMC Panel Mount Power Supply 24V 150W 1 Phase / PMC-24V150W1AX Safety Standards / Directives Electrical Safety TUV Bauart to EN60950-1, UL/cUL recognized to UL60950-1 and CSA C22.2 No. 60950-1, CB scheme to IEC60950-1 CE In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC Material and Parts RoHS Directive 2011/65/EU Compliant Galvanic Isolation Input to Output 3.0 KVac Input to Ground 1.5 KVac Output to Ground 500 Vac EMC EMC / Emissions CISPR22, EN55022, FCC Title 47: Class B Immunity to 1) Electrostatic Discharge IEC61000-4-2 Level 4 Criteria A Air Discharge: 15kV Contact Discharge: 8kV 1) Radiated Field IEC61000-4-3 Level 3 Criteria A 80MHz-1GHz, 10V/M with 1kHz tone / 80% modulation 1) Electrical Fast Transient / Burst IEC61000-4-4 Level 3 Criteria A 2kV 1) Surge IEC61000-4-5 Level 3 Criteria A 2) Common Mode : 2kV 3) Differential Mode : 2kV 1) Conducted IEC61000-4-6 Level 3 Criteria A 150kHz-80MHz, 10Vrms 1) Power Frequency Magnetic Fields IEC61000-4-8 Criteria A 10A/Meter Voltage Dips IEC61000-4-11 100% dip; 1 cycle (20ms); Self Recoverable 1) Low Energy Pulse Test (Ring Wave) IEC61000-4-12 Level 3 Criteria A 2) Common Mode : 2kV 3) Differential Mode : 1kV 1) Criteria A: Normal performance within the specification limits 2) Asymmetrical: Common mode (Line to earth) 3) Symmetrical: Differential mode (Line to line) All parameters are specified at 25°C ambient unless otherwise noted. 4 www.DeltaPSU.com (March 2013, Rev. 00) TECHNICAL DATASHEET PMC Panel Mount Power Supply 24V 150W 1 Phase / PMC-24V150W1AX Block Diagram Device Description 1) Input & Output terminal block connector 2) DC Voltage adjustment potentiometer 3) DC OK control LED (Green) All parameters are specified at 25°C ambient unless otherwise noted. 5 www.DeltaPSU.com (March 2013, Rev. 00) TECHNICAL DATASHEET PMC Panel Mount Power Supply 24V 150W 1 Phase / PMC-24V150W1AX Dimensions L x W x D: 178 x 97 x 38 mm Engineering Data De-rating VS surrounding air temperature Note 1. Power supply components may degrade, or be damaged, when the power supply is continuously used outside the shaded region, refer to the graph shown in Fig. 1. 2. If the output capacity is not reduced when the surrounding air temperature > 50°C, the device may run into Over Temperature Protection. When activated, the output voltage will go into bouncing mode and will recover when the surrounding air temperature is lowered or the load is reduced as far as necessary to keep the device in working condition. 3. If the device has to be mounted in any other orientation, please do not hesitate to contact info@deltapsu.com for more details. 4. In order for the device to function in the manner intended, it is also necessary to keep a safety distance of 20mm with adjacent units while the device is in operation. 5. Depending on the surrounding air temperature Fig. 1 De-rating for Vertical and Horizontal Mounting Orientation > 50°C de-rate power by 2.5% / °C and output load delivered by the power supply, the device housing can be very hot! All parameters are specified at 25°C ambient unless otherwise noted. 6 www.DeltaPSU.com (March 2013, Rev. 00) TECHNICAL DATASHEET PMC Panel Mount Power Supply 24V 150W 1 Phase / PMC-24V150W1AX De-rating VS AC input voltage ■ No output power de-rating across the entire input voltage range Assembly & Installation Mounting ⒶⒶⒶⒶ Mounting holes for power supply assembly onto the mounting surface. Power supply shall be mounted on minimum 2 mounting holes using M3 screw minimum 5 mm length. ⒷⒷⒷⒷ This surface belongs to customer’s end system or panel where the power supply is mounted. ⒸⒸⒸⒸ Connector. Side Mounting (Vertical) Base Mounting (Vertical) Side Mounting (Horizontal) Fig. 2 Mounting Orientation Installation



Only use M3 screw ≤ 6 mm through the base mounting holes. This is to keep a safe distance between the screw and internal components.



Recommended mounting tightening torque : 4~8Kgf.cm All parameters are specified at 25°C ambient unless otherwise noted. 7 www.DeltaPSU.com (March 2013, Rev. 00) TECHNICAL DATASHEET PMC Panel Mount Power Supply 24V 150W 1 Phase / PMC-24V150W1AX Safety Instructions • To ensure sufficient convection cooling, always maintain a safety distance of > 20mm from all ventilated surfaces while the device is in operation. • The device is not recommended to be placed on low thermal conductive surface, for example, plastics. • Note that the enclosure of the device can become very hot depending on the ambient temperature and load of the power supply. Do not touch the device while it is in operation or immediately after power is turned OFF. Risk of burning! • Do not touch the terminals while power is being supplied. Risk of electric shock. • Prevent any foreign metal, particles or conductors to enter the device through the openings during installation. It can cause: - - Electric shock; Safety Hazard; Fire; Product failure • Warning: When connecting the device, secure Earth connection before connecting L and N. When disconnecting the device, remove L and N connections before removing the Earth connection. Functions ■ Graph illustrating the Start-up Time, Rise Time, and Hold-up Time Start-up Time The time required for the output voltage to reach 90% of its set value, after the input voltage is applied. Rise Time The time required for the output voltage to change from 10% to 90% of its set value. Hold-up Time Hold up time is the time when the AC input collapses and output voltage retains regulation for a certain period of time. The time required for the output to reach 95% of its set value, after the input voltage is removed. All parameters are specified at 25°C ambient unless otherwise noted. 8 www.DeltaPSU.com (March 2013, Rev. 00) TECHNICAL DATASHEET PMC Panel Mount Power Supply 24V 150W 1 Phase / PMC-24V150W1AX Inrush Current Overload & Overcurrent Protections Inrush Current is the first surge current seen on the input side The power supply’s Overload (OLP) and Over current (OCP) when AC input is applied to the power supply. It is the first pulse Protections will be activated when output current exceeds 120% captured; see a typical picture for the inrush current as seen in of I (Max load). In such occurrence, the V will start to droop and O O the power supply. once the power supply has reached its maximum power limit, the protection is activated and the power supply will go into “Hiccup mode” (Auto-Recovery). The power supply will recover once the fault condition of the OLP and OCP is removed and I is back O within the specifications. Additionally, if the I is < 120% but > 100% for a prolong period of O time (depending on the load), the Over Temperature Protection (OTP) will be activated due to high temperature on critical components. The power supply will then go into “Hiccup mode” Dynamic Response until power supply cool down. The power supply output voltage will remains within ±5% of its steady state value, when subjected to a dynamic load from 0 to 100% of its rated current. Over Temperature Protection As mentioned above, the power supply also has Over Temperature Protection (OTP). This is activated when the overload condition persists for an extended duration and the output current is below the overload trigger point but > 100% load. In the event of a higher operating condition at 100% load, the power supply will run into OTP when the surrounding air temperature is > 75°C. When activated, the output voltage will go into bouncing mode until the operating surrounding temperature drops to 50°C or output capacity is reduced as recommended in the de-rating graph. Overvoltage Protection Short Circuit Protection The power supply’s overvoltage circuit will be activated when its The power supply’s output OLP/OCP function also provides internal feedback circuit fails. The output voltage shall not exceed protection against short circuits. When a short circuit is applied, its specifications defined on Page 3 under “Protections”. the output current will operate in “Hiccup mode”, as shown in the illustration in the OLP/OCP section on this page. The power supply will return to normal operation after the short circuit is removed. All parameters are specified at 25°C ambient unless otherwise noted. 9 www.DeltaPSU.com (March 2013, Rev. 00) TECHNICAL DATASHEET PMC Panel Mount Power Supply 24V 150W 1 Phase / PMC-24V150W1AX Operating Mode



Redundancy Operation In order to ensure proper redundancy operation for the power supply unit (PSU), ensure that the output voltage difference between the two units is kept at 0.45~0.50V for 24V supplies. Follow simple steps given below to verify: Step 1. Measure output voltage of PSU 1 and PSU 2. If PSU 1 is the master unit, then V of PSU 1 must be higher than O PSU 2. In order to set the output voltage, connect the power supply to 50% load and set the PSU 1 and PSU 2 output voltage. Step 2. Connect the right DRR module, 20A as per the system requirement to the power supply units PSU 1 and PSU 2 Fig. 3 Redundancy / Parallel Operation Connection Diagram at V 1 & V 2 respectively. in in Step 3. Connect the system load from V . Please note that out output voltage Vout from DRR module will be = VO (output voltage of power supply) – V * (in DRR drop module).

Parallel Operation

These DRR modules can also be used for Parallel function in order to increase the output power by N+1 (e.g. 2.5A + 2.5A = 5A or 2.5A + 2.5A + 2.5A = 7.5A) or current sharing, and thus increasing the power supply and system reliability. Though the PMC-24V150W1AX is not designed for current sharing, a good current sharing between two power supplies can be achieved by following simple steps as below (Refer to Fig. 3 for the Connection Diagram). Step 1. Step 3. Set output load condition for both supplies at 50% and measure Connect PSU 1 and PSU 2 with the DRR-20A module and the output voltages. measure at V 1 & V 2 to verify the voltage difference. Ensure in in the voltages are within ±25mV. Step 2. Adjust output voltages to the same level or within ±25mV Step 4. difference. Output voltage from DRR module V will be = V (output out O voltage of power supply) – V * (in DRR module). drop *V will vary from 0.60V to 0.90V (Typical 0.65V) depending on the load current and surrounding air temperature. drop All parameters are specified at 25°C ambient unless otherwise noted. 10 www.DeltaPSU.com (March 2013, Rev. 00) TECHNICAL DATASHEET PMC Panel Mount Power Supply 24V 150W 1 Phase / PMC-24V150W1AX Others Delta RoHS Compliant Restriction of the usage of hazardous substances The European directive 2011/65/EU limits the maximum impurity level of homogeneous materials such as lead, mercury, cadmium, chrome, polybrominated flame retardants PBB and PBDE for the use in electrical and electronic equipment. RoHS is the abbreviation for “Restriction of the use of certain hazardous substances in electrical and electronic equipment”. This product conforms to this standard. All parameters are specified at 25°C ambient unless otherwise noted. 11 www.DeltaPSU.com (March 2013, Rev. 00)