IPC Station

Description

EKI-1361 and EKI-1362 are wireless serial device servers that bring RS-232/422/485 to wireless LAN or LAN. They allow nearly any device with serial ports to connect and share an WLAN network. EKI-1361 and EKI-1362 provide a quick, simple and cost-effective way to bring the advantages of remote management and data accessibility to thousands of devices that cannot connect to a network.
With EKI-1361 and EKI-1362, your existing serial devices can be used with the most popular operating systems on the market. There is no need to write special drivers for specific operating systems. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming. That saves a lot of cost and effort. In addition, you can actively request data or issue commands from the RS-232/422/485 side or wireless LAN side. This data can be sent bilaterally. Thus, the EKI-1361 and EKI-1362 are especially suitable for remote monitoring environments such as security systems, factory automaton, SCADA, transportation and more.

Part Number

EKI-1361-MB-AE

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

Serial Device Servers » Serial Device Servers

Specifications

Environment Operating Humidity

5 ~ 95% RH

Environment Operating Temperature

-30 ~ 65°C (-22 ~ 149°F)

Environment Storage Temperature

-40 ~ 80°C (-4 ~ 176°F)

Ethernet Ports

Ethernet Interface

10/100/1000 Mbps

Power Requirements Power Connector

Terminal block

Power Requirements Power Consumption

Power Requirements Power Input

12 ~ 48 VDC, redundant dual inputs

Ethernet Communications Port Type

RJ45

Wireless LAN Communications Compatibility

IEEE 802.11b/g/n

Wireless LAN Communications Speed

Up to 300Mbps

Wireless LAN Communications Network Mode

Infrastructure, Ad-hoc

Wireless LAN Communications Antenna Connector

Reverse SMA

Wireless LAN Communications No. of Antenna

2 (support 2T2R)

Wireless LAN Communications Free Space Range

Open space 100 m

Wireless LAN Communications Wireless Security

Serial Communication Type

RS-232/422/485, software selectable

Serial Communication Ports

Serial Communication Port Connector

DB9 male

Serial Communication Data Bits

5, 6, 7, 8

Serial Communication Stop Bits

1, 1.5, 2

Serial Communication Parity

None, Odd, Even, Space, Mark

Serial Communication Baud Rate

50 bps ~ 921.6 kbps, any baud rate setting

Serial Communication Serial Signals

RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND, RS-422: TxD+, TxD-, RxD+, RxD-, GND, RS-485: Data+, Data-, GND

Serial Communication Protection

15 KV ESD for all signals

Software Driver Support

32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0, and Linux

Software Utility Software

Advantech Serial Device Server Configuration Utility

Software Operating Mode

Modbus RTU Master/Slave, Modbus ASCII Master/Slave

Software Configuration

Windows utility, Telnet console, Web Browser

Software Protocols

ICMP, TCP/IP, UDP, DHCP Client, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, ARP

Mechanics Enclosure

Plastic and metal shell with solid mounting kits

Mechanics Mounting

DIN-rail, Wall

Mechanics Dimensions (W x H x D)

28.5 x 120 x 85.3 mm (1.12" x 4.72" x 3.36")

Mechanics Weight

0.5 Kg

Categorization Information

Intelligent Connectivity
Industrial Communication
Serial Device Servers

Features

Link any serial device to an IEEE 802.11b/g/n network
Support 802.11n MIMO 2T2R
WLAN transmision rate up to 300 Mbps
Supports secure access with WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise
Provides COM port redirection, TCP, UDP, and pair connection modes
Supports up to 921.6 kbps, and any baud rate setting
Provides Web-based configuration and Windows utility
Allows a max. of 5 hosts to access one serial port
Supports 32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0, and Linux
Allows a max. of 4 hosts to be accessed as TCP client mode

Datasheet

34f9ac7c-e342-4864-96d6-3e40ce1ee417.pdf

621 KiB

Download

Extracted Text

1-port RS-232/422/485 to 802.11b/g/n WLAN Serial EKI-1361 Device Server 2-port RS-232/422/485 to 802.11b/g/n WLAN Serial EKI-1362 Device Server 1-port RS-232/422/485 to 802.11b/g/n WLAN Modbus EKI-1361-MB Gateway 2-port RS-232/422/485 to 802.11b/g/n WLAN Modbus EKI-1362-MB Gateway Features NEW Link any serial device to an IEEE 802.11b/g/n network Support 802.11n MIMO 2T2R WLAN transmision rate up to 300 Mbps Supports secure access with WEP, WPA/WPA2-Personal, WPA/WPA2- Enterprise Provides COM port redirection, TCP, UDP, and pair connection modes Supports up to 921.6 kbps, and any baud rate setting Provides Web-based configuration and Windows utility Allows a max. of 5 hosts to access one serial port Supports Modbus TCP and Modbus RTU EKI-1361 EKI-1362 RoHS COMPLIANT 2011/65/EU Introduction EKI-1361 and EKI-1362 wireless serial device servers bring RS-232/422/485 to wireless LAN or LAN. They allow nearly any device with serial ports to connect and share an WLAN network. EKI-1361 and EKI-1362 provide a quick, simple and cost-effective way to bring the advantages of remote management and data accessibility to thousands of devices that cannot connect to a network. With EKI-1361 and EKI-1362, your existing serial devices can be used with the most popular operating systems on the market. There is no need to write special drivers for specific operating systems. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming. That saves a lot of cost and effort. In addition, you can actively request data or issue commands from the RS-232/422/485 side or wireless LAN side. This data can be sent bilaterally. Thus, the EKI-1361 and EKI-1362 are especially suitable for remote monitoring environments such as security systems, factory automaton, SCADA, transportation and more. Software Specifications OS Support 32-bit/64-bit Windows XP/Vista/7/8/8.1, Windows Server 2003/2008/2008 R2/2012/2012 R2, Windows Ethernet Communications CE 5.0, and Linux Port Type RJ45 Utility Software Advantech EKI Device Configuration Utility No. of Ports 1 Operation Modes Access point mode Speed 10/100/1000 Mbps Pair connection without AP (peer to peer) mode EKI-1361/2 Wireless LAN Communications COM port redirection mode (Virtual COM) TCP/UDP server (polling) mode Compatibility IEEE 802.11b/g/n TCP/UDP client (event handling) mode Speed Up to 300Mbps EKI-1361/2-MB Network Mode Infrastructure Modbus RTU Master/Slave Antenna Connector Reverse SMA Modbus ASCII Master/Slave No. of Antenna 2 (supports 2T2R) Configuration Windows utility, Telnet console, Web Browser Free Space Range Open space 100 m Protocol ARP, ICMP, IPv4, IPv6, TCP, UDP, BOOTP, DHCP Wireless Security WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise Client, Auto IP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP Mechanics Serial Communications Enclosure Plastic and metal shell with solid mounting kits Port Type RS-232/422/485, software selectable Mounting DIN-rail, Wall No. of Ports EKI-1361: 1 Dimensions (W x H x D) 28.5 x 120 x 85.3 mm (1.12" x 4.72" x 3.36") EKI-1362: 2 Weight 0.5 Kg Port Connector DB9 male Data Bits 5, 6, 7, 8 General Stop Bits 1, 1.5, 2 LED Indicators System: Power, System Status Parity None, Odd, Even, Space, Mark WLAN: Quality, Link/Active Baud Rate 50 bps ~ 921.6 kbps, any baud rate setting LAN: Link/Active Serial Signals RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND Serial: Tx, Rx RS-422: TxD+, TxD-, RxD+, RxD-, GND Reboot Trigger Built-in WDT (watchdog timer) RS-485: Data+, Data-, GND Protection 15 KV ESD for all signals Power Requirements Power Input 12 ~ 48 VDC, redundant dual inputs Power Connector Terminal block Power Consumption EKI-1361: 8W EKI-1362: 9W IP Gateway and Serial Device Servers All product specifications are subject to change without notice Last updated : 27-Jul-2016 EKI-1361 EKI-1362 EKI-1361-MB EKI-1362-MB Dimensions Unit: mm [inch] 38.80 35 [1.528] [1.378] EKI-1361 94.3 [3.711] 85.30 [3.358] 36.30 40 28.5 [1.122] 28.5 [1.122] 85.30 [3.358] [1.429] [1.575] 79.30 [3.122] Panel Cut-out Dimensions: 94.3 x 120 x 28.5 mm (3.711" x 4.724" x 1.122") 38.80 35 EKI-1362 [1.528] [1.378] 94.3 [3.711] 85.30 [3.358] 36.30 40 28.5 [1.122] 28.5 [1.122] 85.30 [3.358] [1.429] [1.575] 79.30 [3.122] Panel Cut-out Dimensions: 94.3 x 120 x 28.5 mm (3.711" x 4.724" x 1.122") Environment Ordering Information Operating Temperature -30 ~ 65°C (-22 ~ 149°F) EKI-1361 1-port 802.11b/g/n WLAN Serial Device Server Storage Temperature -40 ~ 80°C (-40 ~ 176°F) EKI-1362 2-port 802.11b/g/n WLAN Serial Device Server Operating Humidity 5 ~ 95% RH EKI-1361-MB 1-port 802.11b/g/n WLAN Modbus Gateway EKI-1362-MB 2-port 802.11b/g/n WLAN Modbus Gateway Regulatory Approvals OPT1-DB9 D-Sub9 to Terminal Converter EMC CE, FCC Part 15 Subpart B (Class B) Online Download www.advantech.com/products 10 10 120 [4.72] 120 [4.72] [0.394] [0.394] 11.60 11.60 [0.457] [0.457] 37.95 47.05 37.95 47.05 13.50 [1.494] [1.852] 13.50 [1.494] [1.852] [0.531] [0.531] 120 [4.72] 120 [4.72] 130 [5.118] 130 [5.118] 130 [5.118] 130 [5.118]

Frequently asked questions

IPC Station' parent company, GID Industrial, specializes in procuring industrial parts. We have years of experience finding rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. It is possible for some parts to be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have our own accounts, but we can also use yours if you would prefer. However, we can use other carriers if it will be more convenient for you.

IPC Station will definitely serve you. In fact, much of our business is international, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by IPC Station. We can also accept wire transfers and PayPal, or a check if you're in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products