Heavy Industrial RS-422/485 Isolated Repeater Model 485OPDRI-PH www.advantech-bb.com PRODUCT FEATURES • IEEE-61850-3, IEEE-1613 • NEMA TS2 • -40 to 85°C Operating Temperature • Rugged IP30 Metal Panel Mount Case • 50G Shock, 4G Vibration • 2kV Triple Isolation • 10 to 48 VDC Input Power Model 485OPDRI-PH is our premium heavy industrial RS-422/485 isolated ORDERING INFORMATION repeater. Designed for rugged industrial environments, it has been put MODEL NUMBER DESCRIPTION through some of the most exacting compliance tests in the industry. Meeting 485OPDRI-PH Heavy Industrial RS-232 to RS-422/485 Isolated Repeater the requirements of IEC 61850-3 and IEEE 1613, it is suitable for installation in electrical substations. These specifications are more stringent than the ACCESSORIES NEMA TS1/TS2 requirements for transportation applications. Powerful MDR-40-24 - DIN Rail Mount Power Supply 24VDC, 1.7 A output power isolation on both data ports protects your equipment and data from damaging DRAD35 - DIN Rail Mounting Kit, 35mm ground loops and surges. Additional isolation on the power supply circuits TBKT1 - Replacement Terminal Block, 2 adds a third degree of protection. Packaged in a rugged IP30 metal case, it extends full or half-duplex RS- 422/485 signals an additional 4000 feet and allows you to add another 32 nodes to your network. Bit-wise enabled circuitry automatically detects the data rate without setting a DIP switch. MECHANICAL All product specifications are subject to change without notice. 485OPDRI-PH_2917ds orders@advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support@advantech-bb.com European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 Heavy Industrial RS-422/485 Isolated Repeater Model 485OPDRI-PH SPECIFICATIONS SERIAL TECHNOLOGY INDICATORS RS-422 TDA(-), TDB(+), RDA(-), RDB(+) Power Red LED RS-485 4-Wire TDA(-), TDB(+), RDA(-), RDB(+) TD / RD (Each Port) Green LED RS-485 2-Wire Data A(-), Data B(+) MECHANICAL 13.24 x 9.29 x 3.30 cm RS-422/485 CON. 5 Position, Removable Terminal Block Dimensions 5.2 x 3.7 x 1.3 in Data Rate 1.2 to 115.2 Kbps Enclosure IP30 Metal, Panel Mount Isolation 2 KV RMS, 1 minute Weight 0.46 lbs (208.65 grams) 600 W Peak Power Dissipation Surge Protection MTBF 122832 Hours Clamping time < 1 pico-second Industrial Bus Modbus ASCII / RTU MTBF Calc. Method Parts Count Reliability Prediction Bias Built-in, switchable 1.2KΩ XMT/RCV ENVIRONMENTAL Termination Built-in, switchable 120Ω Operating Temperature -40 to 85°C (-40 to 176°F) POWER Storage Temperature -40 to 85°C (-40 to 176°F) Source External Operating Humidity 0 to 95% Non-condensing Power Connector 2-Position Removable Terminal Block REGULATORY FCC, CE, IEC 61850-3, IEEE 1613, UL C1 D2, Input Voltage 10 to 48 VDC (56 VDC Maximum) Approvals File: E245458, NEMA TS2 Power Consumption 0.5 W typical (2.3 W with termination) TERMINAL BLOCKS Wire Size Accepted 28 to 12 AWG, Copper wire only Pitch 5.08 mm Insulation Resistance ≥500 MΩ @ 500 VDC Maximum Torque 5 Kg / cm Temperature Rating of field installed conductors 105°C minimum IEC 61850-3 ELECTRO MAGNETIC INTERFERENCE SPECIFICATIONS Test Description Test Level Level Enclosure Contact 8 kV 4 61000-4-2 ESD Enclosure Air 15 kV 4 61000-4-3 Radiated RFI Enclosure Ports 10 V/m 3 Signal Ports 4 kV @ 2.5 Khz - 61000-4-4 Burst (Fast Transient) DC Power Ports 4 kV 4 Signal Ports 2 kV line to earth, 1 kV line to line 4 61000-4-5 Surge DC Power Ports 2 kV line to earth, 1 kV line to line 3 Signal Ports 10 V RMS 3 61000-4-6 Induced (Conductive) RFI DC Power Ports 10 V RMS 3 Signal Ports 2.5 kV common, 1 kV diff mode @ 1MHz 3 61000-4-12 Damped Oscillatory DC Power Ports 2.5 kV common, 1 kV diff mode @ 1MHz 3 Signal Ports 30 V Continuous, 300 V for 1 s 4 61000-4-16 Mains Frequency Voltage DC Power Ports 30 V Continuous, 300 V for 1 s 4 61000-4-17 Ripple on DC Power Supply DC Power Ports 10% 3 IEEE 1613 C37.90 ELECTROMAGNETIC INTERFERENCE SPECIFICATIONS Enclosure Contact 8 kV C37.90.3 ESD - Enclosure Air 15 kV C37.90.2 Radiated RFI Enclosure Ports 10 v/m - Signal Ports 4 kV @ 2.5 kHz C37.90.1 Fast Transient - DC Power Ports 4 kV ENVIRONMENTAL SPECIFICATIONS 60068-2-1 Cold Temperature Test Ad (-)40 C, 16 Hours - 60068-2-2 Dry Heat Test Bd (+)85 C, 16 Hours - 60068-2-30 Humidity (damp heat cycle) Test Dd 90% (non-condensing) (+)55C, 6 Cycles - IEC 600068-2-6 Vibration Test Fc 4g Class 2 IEC 600068-2-27 Shock Test Ea 50g Class 2 IEC 60068-2-32 Drop - 6 faces, 1 corner, 3 edges, total 10 drops at 1 m - orders@advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support@advantech-bb.com European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445