PMC-VLX110E - ACROMAG

Description

PMC-VLX: Reconfigurable Virtex-5 FPGA with plug-in I/O
Acromag's PMC-VLX boards feature a reconfigurable Xilinx® Virtex™-5 FPGA enhanced with multiple high-speed memory buffers and a high-throughput PCI-X interface. Field I/O interfaces to the FPGA via the rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules. The result is a powerful and flexible I/O processor module that is capable of executing your custom instruction sets and algorithms. Three models provide a choice of logic-optimized FPGAs to match your performance requirements. Although there is no limit to the uses for these boards, several applications are ideal. Typical uses include hardware simulation, communications, military servers, in-circuit diagnostics, signal intelligence, and image processing. Watch: FPGA Computing for Speed and FlexibilityPMC FPGA Module: User-configurable Virtex-5 FPGA with 110,592 logic cells.PMC FPGA Module: User-configurable Virtex-5 FPGA with 110,592 logic cells plus conduction-cooled and extended temperature range.

Part Number

PMC-VLX110E

Price

Request Quote

Manufacturer

ACROMAG

Lead Time

Request Quote

Category

PMC Products » PMC FPGA Boards

Specifications

Categorization Information

Embedded I/O & Processors
PMC Products
PMC FPGA Boards
Virtex-5 Series

Features

64 LVDS I/O and plug-In I/O modules
XC5VLX85T/110T/155T FPGA, up to 155K logic cells, 128 DSP48E slices
Reconfigurable Xilinx Virtex-5 FPGA
PCI-X bus 100MHz 64-bit interface
Supports both front and rear I/O connections
64 I/O or 32 LVDS lines direct to FPGA via rear (J4)
Plug-in I/O modules are available for front mezzanine
FPGA code loads from PCI bus or flash memory
Two banks of 256Kb x 32-bit dual-ported SRAM
Two banks of 32Mb x 16-bit DDR2 SDRAM
Other memory options available (contact factory)
Supports dual DMA channel data transfer to CPU/bus
Supports 3.3V signalling
Support for Xilinx ChipScope™ Pro interface
0 to 70°C or -40 to 85°C (E versions)

Datasheet

PMC-VFX-User-Configurable-Virtex-5-FPGA-Modules-with-Plug-In-IO-PMC-Board.pdf

1843 KiB

Download

Extracted Text

Dependable Flexible Compatible PMC Virtex 5 PMC Virtex 5 Product Overview PMC-Virtex 5 Overview Dependable Flexible Compatible DDR2 1.2V 256kb x 36 1.0V SDRAM LDO Dual Port Power 32M x 16 SRAM Supply DDR2 0.9V SDRAM LDO 32M x 16 CLK 1.0V LDO 256kb x 32 1.8V Dual Port Power Flash SRAM Supply 16M bytes Front AXM I/O Connector 2.5V PCI/PCI-X Bus PCI/PCI-X Bus PCI/PCI-X Bus Rear 64 I/O Points PCI Bus Dependable 32 bit and 64-bit PCI-X Master/Target Flexible Interface Compatible Supports Bus Speeds up to 133MHz PCI r3.0 Compliant DDR2 1.2V 256kb x 36 1.0V SDRAM LDO Dual Port Power 32M x 16 SRAM Supply DDR2 0.9V SDRAM LDO 32M x 16 CLK 1.0V LDO 256kb x 32 1.8V Dual Port Power Flash SRAM Supply 16M bytes Front AXM I/O Connector 2.5V PCI/PCI-X Bus PCI/PCI-X Bus PCI/PCI-X Bus Rear 64 I/O Points 2 DMA Channels Block Mode Dependable Flexible Demand Mode Compatible Demonstrated 840 MB/sec Sustained Transfer Rate at 133MHz DDR2 1.2V 256kb x 36 1.0V SDRAM LDO Dual Port Power 32M x 16 SRAM Supply DDR2 0.9V SDRAM LDO DMA 0 32M x 16 CLK DMA 1 1.0V LDO 256kb x 32 1.8V Dual Port Power Flash SRAM Supply 16M bytes Front AXM I/O Connector 2.5V PCI/PCI-X Bus PCI/PCI-X Bus PCI/PCI-X Bus Rear 64 I/O Points Virtex 5 Dependable Device Resource Summary Flexible Compatible Device Logic DSP Block DCM PLL Cells Slices RAM Virtex 5 69,120 64 148 12 6 LX110T Virtex 4 59,904 64 160 8 0 LX60 Board Clocks Dependable Flexible Compatible Rear Input/Output Rear Input/Output via J4 Connector Dependable provides 64 I/O Points Flexible Compatible Link Directly to the Virtex 5 (banks 1,4, and 21) 8 Global Clock pins DDR2 1.2V 256kb x 36 1.0V 21 SDRAM LDO Dual Port Power 4 32M x 16 SRAM Supply DDR2 0.9V 1 SDRAM LDO 32M x 16 CLK 1.0V LDO 256kb x 32 1.8V Dual Port Power Flash SRAM Supply 16M bytes Front AXM I/O Connector 2.5V PCI/PCI-X Bus PCI/PCI-X Bus PCI/PCI-X Bus Rear 64 I/O Points Rear Input/Output Dependable Flexible Compatible Supports 2.5 Volt IO Standards LVDS 1.25Vocm and .350VoDIFF Extended LVDS 1.25Vocm and 0.75VoDIFF HS Hypertransport 0.6Vocm and 0.6VoDIFF LVCMOS Voh min = 2.1v Vih min = 1.7v, Vol max 0.4v, Vil max 0.7v Front Mezzanine Connector Samtex Connector Power to Bank 15 Dependable Rated for 2GHz and 17 controlled by Flexible Operation Compatible Mezzanine Power Supplies – VRN, VRP, and Routed : Vref from Bank 15 +/-12, 5, 3.3, 2.5. and 17 Three Global Clocks JTAG Pins from Bank 3 and 4 Front Mezzanine Connector Dependable Flexible I/O Signal Routed as Differential Pairs Compatible 17 15 I/O Mezzanine Modules AXM-DO2 30 Differential Dependable Flexible Compatible AXM-DO3 22 Differential 16 CMOS AXM-D04 30 LVDS AXM-A30 2 105MHz ADC AXM-EDK JTAG & LVTTL Dual Port Memory Dependable 256K x 64-bit Useful for DMA Flexible Compatible Transfer of Data Port to PCI bus and Port to FPGA Burst Transfers 840 MB/s DDR2 1.2V 256kb 256kb x 36 x 36 1.0V SDRAM LDO Dual Port Dual Port Power 32M x 16 SR SRA AM M Supply DDR2 0.9V SDRAM LDO 32M x 16 CLK 1.0V LDO 256kb 256kb x 32 x 32 1.8V Dual Port Dual Port Power Flash SR SRA AM M Supply 16M bytes Front AXM I/O Connector 2.5V PCI/PCI-X Bus PCI/PCI-X Bus PCI/PCI-X Bus Rear 64 I/O Points DDR2 SDRAM 32M x 32-bit Dependable Flexible Internal FPGA Controller Clock 150MHz Compatible Data Transfer Rate is 300M 32-bit words/s IP Provided by Xilinx Memory Interface Controller (MIG) DDR2 SRAM 32Mb X 16 Configuration Options Automatic Configuration from Flash Dependable Flexible Compatible Memory on Power Up – Configuration starts after reset is released – Continues until FPGA DONE DDR2 1.2V 256kb x 36 1.0V SDRAM LDO Dual Port Power 32M x 16 SRAM Supply DDR2 0.9V SDRAM LDO 32M x 16 CLK 1.0V LDO 256kb x 32 1.8V Dual Port Power F Fllash ash SRAM Supply 16M b 16M by ytte es s Front AXM I/O Connector 2.5V PCI/PCI-X Bus PCI/PCI-X Bus PCI/PCI-X Bus Rear 64 I/O Points Configuration Options Direct Over PCI Bus Dependable Flexible – 2.9 seconds LX40 FPGA Configuration Compatible Direct Time Front Mezzanine JTAG via EDK Board DDR2 1.2V 256kb x 36 1.0V SDRAM LDO Dual Port Power 32M x 16 SRAM Supply DDR2 0.9V SDRAM LDO 32M x 16 JTAG CLK 1.0V LDO JTAG 256kb x 32 1.8V Dual Port Power Flash SRAM Supply 16M bytes Mezzanine Front AXM I/O Connector 2.5V PCI/PCI-X Bus PCI/PCI-X Bus PCI/PCI-X Bus Rear 64 I/O Points Flash Memory 16Mbyte Flash Device Dependable Flexible Compatible – On board Logic controls Flash Memory read and write operations – 128 addressable sectors à Each sector stores 128Kbytes – 31 sectors for LX110T à 3.9Mbyte Program Code Size Flash Memory – 97 sectors remain user available Dependable Flexible à 12Mbyte User Flash space available Compatible Flash 16Mbytes EDK Dependable Flexible User’s Manuals Compatible New Getting Started Document Schematics VHDL – Example Design Files Constraint File Configuration Files

Frequently asked questions

IPC Station' parent company, GID Industrial, specializes in procuring industrial parts. We have years of experience finding rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. It is possible for some parts to be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have our own accounts, but we can also use yours if you would prefer. However, we can use other carriers if it will be more convenient for you.

IPC Station will definitely serve you. In fact, much of our business is international, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by IPC Station. We can also accept wire transfers and PayPal, or a check if you're in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products