86.00 9.50 24.50 68.00 135.00 135.00 8400100.qxp 3/20/2006 3:16 PM Page 32 EIS Series 53.00 Dimensions 10/100Base-T(X), 100Base-FX 25.00 14.00 Side View 102.00 Rear View 26.50 Bottom View 29.50 1.80 5.5*2=11 EIS-408FX Ethernet 9.00 30.00 Power Industrial Switch V2– V2+ N/A V1– V1+ 105.00 Dimensions in millimeters. 8 Ports (6 Cu, 2 Fiber), Web-Managed, with Redundancy disconnected, redundant ring technology allows only to the devices that are interested in the n Description this switch to self-reconfigure and to provide a messages. It will reduce the total amount of The EIS-408 is an 8-port web-managed industrial redundant path in the network. With ultra-fast traffic on the entire network substantially. switch. It supports many powerful industrial recovery time (less than 300ms), your mission- Ethernet features such as redundant ring tech- critical applications are protected from any net- n Special Features nology, port VLAN, Quality of Service (QoS), work interruptions or temporary malfunctions. Rugged Industrial-Grade Internet Group Management Protocol (IGMP) You won't even notice a network failure. n 6 copper, 2 fiber port web managed redundant Snooping, and a media/power failure alarm. switch with media/power fault alarm relay Advanced Management This switch has six 10/100Base-TX ports and two In addition to redundant ring technology, the n IEEE 802.3, 3u, 3x compliant 100Base-FX ports for extending communication EIS-408 provides many advanced features for distance from 2,000 meters (multi-mode fiber) to n Fast redundant ring technology (<300mS) network management. The EIS-408 supports 30 km (single-mode fiber). The EIS-408 also has Quality of Service (QoS) which classifies the n Supports open STP & RSTP redundant protocols redundant DC power inputs. With the web-based importance of each packet and prioritizes configuration interface, this switch ensures easy n Extended operating temperature -10 to 70°C the tasks. Ethernet packets, such as control installation and management of your switches. The messages, are handled first followed by lower n Port-to-port isolation (1200V AC) IP30 robust aluminum case and 300,000 hours of priority packets such as collected data. QoS MTBF make the EIS-408 the best solution to n Built-in RFI/EMI and surge/transient protection provides an ideal solution for real-time systems. enhance your industrial networking automation. n Wide range 12-48V DC redundant power with With the port-based VLAN function, devices are reverse polarity protection Redundant Ring put into logical subgroups within a local area Recovery Time < 300ms network regardless of the physical LAN segment High-Performance A critical criteria for industrial automation appli- they are on. Devices from a different VLAN can- n Supports VLan/Qos/IGMP snooping cations is the ability to ensure non-stop system not communicate or access your LAN, providing - IGMP with query mode operation. If a minor failure in the communica- extra security to the entire network. VLAN func- - VLAN/802.1Q Tag VLAN tion process occurs, you could suffer substantial tions can also restrain the traffic within a VLAN - Class of Service (COS) and (TOS) damage in terms of extra time and monetary to improve network performance in a large scale. - SNTP, online port mirroring & IP security losses. EIS-408 Series switches are your ultimate IGMP Snooping can manage multicasting traffic - Broadcast packet filtering solution. With self-healing redundant ring tech- in a switched network. By filtering the multicast- nology, the EIS-408 provides you with an auto- n Rugged IP30 aluminum enclosure ing traffic and sorting it to the corresponding matic self-recovery mechanism. If any segment of group of devices, the EIS-408 forwards messages n 5-year warranty your primary communication path is broken or Tel: 248-295-0880 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 32 Switches 5.5*13=71.5 12.00 Switches 8400100.qxp 3/20/2006 3:16 PM Page 33 Industrial Ethernet Switches LEDs Power consumption n Performance Per port: Link/Activity (Green). 6 Watts. Full-Duplex/Collision (Orange/Yellow). n Ethernet Interface Installation Per unit: Power, Power 1, and Power 2 (Green). Ports DIN-Rail kit (attached) and wall mounting plate Fault (Orange). Ring Master (Green). Six copper 10/100Base-TX, auto-MDI/MDIX. (included accessory). Two fiber optic 100Base-FX, SC connectors. Network Cables Electromagnetic Interference Immunity (EMI) 10Base-T: Twisted-pair UTP/STP Cat. 3, 4, 5 cable Standards FCC Class A. EIA/TIA-568 100-ohm (100m maximum). IEEE 802.3 10BaseT Ethernet. Electromagnetic Compatibility (EMC) IEEE 802.3u 100BaseTX Fast Ethernet. 100Base-TX: Twisted-pair UTP/STP Cat. 5 cable EN61000-4-2, EN61000-4-3, EN-61000-4-4, IEEE 802.3x flow control and back pressure. EIA/TIA-568 100-ohm (100m). EN61000-4-5, EN61000-4-6, EN61000-4-8, IEEE 802.1p class of service. 100Base-FX: Select multi-mode or single-mode cables. EN61000-4-11. IEEE 802.1Q VLAN. Backplane Safety Processing 1.6 Gbps. UL, CUL, CE/EN60950, IP-30. Non-blocking, store-and-forward switching architecture. Relay Alarm Current/Voltage Stability Packet Filter Up to 1A and 24V DC. IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), Broadcast packet filtering. IEC60068-2-6 (Vibration). n Environmental Protocols CSMA/CD. Port Isolation n Ordering Info Port-to-port isolation of 1200V AC. Transmission Rate Models 14880pps 10Base-T, 148800pps 100Base-TX/FX. Ambient Temperature EIS-408FX-S Operating: -10 to 70°C (14 to 158°F). Transfer packet size Ethernet switch with redundancy, 6 Cu / 2 FO, Storage: -40 to 85°C (-40 to 185°F). 64 bytes to 1522 bytes (with VLAN tag). single-mode fiber (up to 30 km). Relative Humidity EIS408FX-M Packet Throughput 5 to 95%, non-condensing. Ethernet switch with redundancy, 6 Cu / 2 FO, 1.19 Mpps with 64 bytes/packet and 8 active ports. Power Supply multi-mode fiber (up to 2 km). MAC Address Table Size 12 to 48 VDC, redundant dual DC power inputs with Accessories 2K MAC address table. reverse polarity protection and a removable terminal See Page 36 for cables, power supplies, and block. Memory Buffer mounting hardware. 1 Mbits. Tel: 248-295-0880 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 33 8400100.qxp 3/20/2006 3:17 PM Page 36 Industrial Ethernet Switches Accessories Cables Mounting Hardware Power Supplies STRAIGHT CAT5 CABLE RJ45 RJ45 3 Feet LONG CONNECTS 900EN-S005 SWITCH TO 9XXEN ETHERNET I/O MODULE n Ordering Information 5035-355 Ethernet straight cable, CAT5, 3 feet long, shielded 5035-360 Ethernet crossover cable, CAT5E, 5 feet long, shielded 5035-365 Configuration cable for advanced features, DB-25 PC DIN-Rail Mounting parallel port to dual row connector, 4 feet long 50W Supply For your convenience, Acromag offers several Input Power Requirement mounting accessories to simplify your system 85 to 264V AC or 105 to 370V DC installation. Our 19” rack-mount kit provides a Output clean solution for mounting your I/O modules 24V DC, 2.1A (50W) and a power supply. Or you can buy precut DIN n Ordering Information rail strips for mounting on any flat surface. PS5R-D24 Universal 50W power supply n Ordering Information 20RM-16-DIN See Page 199 for other models and more information. 19" rack-mount kit with DIN rail. DIN RAIL 3.0 DIN RAIL 16.7 DIN rail strip, Type T, 3 inches (75mm) or 16.7 inches (425mm) Tel: 248-295-0880 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 36 Switches