900EN Series PUSH BUTTON OPTION DIP SWITCHES 10Base-T / 100Base-TX RESET No configuration required when used Acromag OPTIONS PROGRAM 34 33 32 31 as a simple switch with RUN ST Acromag I/O modules. X1 DC PWR X2 X3 X4 X5 C L ETHERNET SWITCH X1 X2 X3 X4 "T" RAIL DIN MOUNTING DIN EN 50022, 35mm 1.05 3.90 (26.7) (99.1) 4.35 (110.5) 900EN-S005 Advanced Features ■ Special Features Ethernet Switch: ■ Three programmable LED's per port provide Industrial-Grade link, activity, full/half duplex, speed indication 5-Ports, 10/100Mbps ■ Reliable performance over wide -25 to 70°C ■ Optional DIP-switch programming offers ambient temperature range ■ Description alternative control of switch functions ■ Wide-Range DC-power with redundant power Acromag’s five-port Ethernet switch is specially ■ Half-duplex back pressure flow controls defer connection for optional standby backup power designed for use in industrial applications. transmission by other stations to avoid Rugged construction and a variety of security ■ Hardened for harsh environments to protect network congestion. features ensure reliable operation under from RFI, EMI, ESD, EFT, and surges ■ Energy miser function shuts down individual demanding conditions. Internal intelligence ■ Fully isolated for safety and increased noise port power if no cable is connected to enables “connect and go” operation for fast and immunity with power-to-network and conserve energy easy network installation with auto-negotiation port-to-port isolation of data rate, flow control, and crossover signal ■ Toggle switch reset and default address compatibility. No configuration is necessary when ■ Easy mounting, removal, and replacement generator is also useful to invoke DIP switch the 900EN-S005 is used as a simple switch with with plug-In terminal and DIN-rail mount field programming and to restore communica- Acromag I/O modules. For advanced users, this tions to a known state High-Performance switch offers numerous control functions that are ■ Smart address management features ■ 10Base-T and 100Base-TX support automati- easily configured through DIP-switch settings or automatic address learning, address aging, cally negotiates 10/100Mbps, half or full programmed using your computer. and address migration duplex with flow controls per IEEE 802.3 Network Communication ■ Advanced options are programmable via ■ Store and forward operation for 1024 frames Five shielded RJ-45 sockets, 8-pin, connection to your PC parallel port – LPTx provides integrated address look-up supporting 10Base-T / 100Base-TX (requires optional configuration cable) 1K absolute MAC addresses Wired MDI-X with automatic ■ Supports virtual LAN definitions with port- ■ Auto MDI/MDI-X crossover & auto-polarity MDI-X / MDI crossover based VLAN controls allowing establishment of eliminates special up-link/down-link ports or VLAN groups for additional security between Auto-negotiated 10Mbps or 100Mbps crossover cables groups and applications (requires optional Auto-negotiated full or half duplex ■ Unmanaged stand-alone operation does not configuration cable) require PC control IEEE 802.3, 802.3u, 802.3x compliance ■ Queue priority management controls with ■ Broadcast storm protection helps unburden advanced quality of service (QoS) supports Power Requirement switch resources from excessive broadcast "DiffServ" and IEEE 802.1p-based priority to 15 to 36V DC supply (2.6 Watts) required messaging prioritize different classes of voice, video, and data traffic, plus port-based priority (requires ■ Integrated 128KB (32Kx32-bit) high-speed Approvals optional configuration cable) SRAM frame buffer is shared by all five ports CE/ATEX marked. and supports 1.4Gbps memory bandwidth UL, cUL listed, Class I; Div. 2; Groups A, B, C, D. Tel: 248-295-0880 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 34 Switches 2.34 (59.4) 100 COL LK / X5 ACT 3.75 (95.3) 4.22 (107.1) X5 PUSH TO RESET GND DC- DC+ DC+ TB3 Switches Industrial Ethernet Switches USE OF AN ETHERNET SWITCH TO NETWORK A HOST PC TO MORE THAN ONE MODULE Acromag 900EN-S005 Acromag 34 33 32 31 OPTIONS PROGRAM 5-Port Ethernet Switch The ethernet port of the PC is RUN or equivalent. generally not automatic MDI/MDI-X X1 DC PWR X2 crossover and is wired MDI. The ethernet ports of this X3 X4 ETHERNET switch are automatic MDI/MDI-X X5 CAT-5 UTP CABLE SWITCH crossing and do not require HOST PC UP TO 100 METERS crossover cables. Acromag 9xxEN-4012 ETHERNET SWITCH Ethernet Modules. Because the Acromag ethernet switch X1 X2 X3 X4 Acromag 900EN-S005 is automatic MDI/MDI-X RUN ST crossover, use of a direct (straight-through) The ethernet port of these 0 1 2 3 modules are not automatic or crossover cable is permissible. 4 5 6 7 8 91011 MDI/MDI-X crossover, but the use of an auto-crossing IMPORTANT: IF THE HOST PC CONNECTS DIRECTLY TO THE MODULE, ACT LINK switch eliminates the need YOU MUST USE A CROSS-CONNECT CABLE (MDI-X), AS BOTH THE PC CAT-5 UTP CABLE DFT RST AND THE 9XXEN MODULE ETHERNET PORTS ARE WIRED MDI. to make a distinction between UP TO 100 METERS Acromag straight-through and crossover RUN ST cables. MOST ETHERNET SWITCHES AND HUBS ARE AUTOMATIC MDI/MDI-X 0 1 23 (Straight-Through or Crossover Cable) ETHERNET AND ELIMINATE THE NEED FOR MAKING A DISTINCTION BETWEEN 4 5 6 7 8 91011 THE USE OF STRAIGHT-THROUGH (MDI) AND CROSSOVER (MDI-X) CABLE CONNECTIONS. ACT LINK CAT-5 UTP CABLE DFT RST UP TO 100 METERS Acromag RUN ST (Straight-Through or Crossover Cable) ETHERNET ACT LINK CAT-5 UTP CABLE DFT RST UP TO 100 METERS Acromag RUN ST (Straight-Through or Crossover Cable) ETHERNET ACT LINK CAT-5 UTP CABLE DFT RST UP TO 100 METERS (Straight-Through or Crossover Cable) ETHERNET Priority Electromagnetic Interference Immunity (EMI) Performance Specifications Transmit all high priority before any low priority Product has demonstrated resistance to digital upsets Ethernet Interface (default) with a variable high:low interleave (optional). with interference from switching solenoids, Optionally select DiffServ, 802.1p, and port-based commutator motors, and drill motors. Connector priority controls. Five shielded RJ-45 sockets, 8-pin, Regulatory Approvals 10BaseT/100BaseTX. Virtual LAN Electromagnetic Compatibility (EMC): EN50082-1. Supports virtual LAN definitions. ESD: EN61000-4-2. Wiring RFI: EN61000-4-3 and EN50204. Wired MDI-X w/ automatic MDI-X / MDI crossover. Communication Distance EFT: EN61000-4-4. Distance between two devices generally limited to 100 Data Rate Surge: EN61000-4-5. meters. Hubs and switches can extend distance. Auto-negotiated, 10Mbps or 100Mbps. CRFI: EN61000-4-6. Program Interface Emissions: EN50081-1. Duplex 2 DIP-switches and EEPROM/I C interfaces allow some Radiated Emissions: EN55022 Class A. Auto-negotiated, Full or Half Duplex. operating parameters to be modified and optional Compliance modes of operation to be set with or without a PC. IEEE 802.3, 802.3u, 802.3x. Ordering Information Environmental Port Status Indicators Ambient Temperature Three LED’s per port - red, yellow, and green. Two Models Operating: -25 to 70°C (-13 to 158°F). selectable indication modes combine speed, link 900EN-S005 Storage: -40 to 85°C (-40 to 185°F). status, activity indication, and duplex indication. Ethernet switch, 5-port Relative Humidity Address Learning Accessories (See Page 36) 5 to 95%, non-condensing. Automatic, stores up to 1K (1024) MAC addresses. 5035-355 Isolation Ethernet straight cable, CAT5, 3 feet long, shielded Address Aging Power and network circuits are isolated from each Automatic, 5 minute default, can be disabled. 5035-360 other for common-mode voltages up to 250VAC, or Crossover cable for module configuration, CAT5E, Address Migration 354V DC off DC power ground, on a continuous basis 5 feet long, shielded Automatic. (will withstand 1500VAC dielectric strength test for PS5R-D24 one minute without breakdown). Broadcast Storm Protection Power supply (24V DC, 2.1A) Disabled (default), but may optionally select a Power Requirements variable receive threshold. Non-polarized 15-36V DC SELV (2.6 Watts). Tel: 248-295-0880 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 37 100M COL LK / X5 ACT X5 PUSH TO RESET GND DC- DC+ DC+ TB3 CH. I/O STATUS CH. I/O STATUS