SCHMERSAL 101171794

22.02.2016 - 21:30:59h Datasheet - TV14H 236-20z Position switch / 236 Thermoplastic enclosure - EN 50047 with Actuator / 236 Roller lever 14H Preferred typ • Thermoplastic enclosure • Good resistance to oil and petroleum spirit • Wide range of alternative actuators • 30 mm x 58,5 mm x 30 mm • 1 Cable entry M 20 x 1.5 • Double-insulated • Mounting details to EN 50047 • Actuator heads can be repositioned by 4 x 90° • Lever angle adjustable in 10° steps (Minor differences between the printed image and the original product may exist!) Ordering details Product type description TV14H 236-20Z Article number 101101976 EAN code 4030661071336 eCl@ss 27-27-26-01 Approval Approval USA/CAN CCC Classification Standards EN ISO 13849-1 Mission time 20 Years notice Global Properties Product name T 236 Rollenschwenkhebel 14 H Standards IEC 60947-5-1, ISO 13849-1, BG-GS-ET-15 Compliance with the Directives (Y/N) Yes Suitable for safety functions (Y/N) No Materials - Material of the housings Plastic, glass-fibre reinforced thermoplastic, self-extinguishing - Lever material Metal film - Roller material Plastic - Material of the contacts Silver Housing coating None Housing construction form Norm construction design Weight 75 g Mechanical data Design of electrical connection Screw connection Cable section - Min. Cable section 1.5 mm² - Max. Cable section 2.5 mm² Mechanical life 20.000.000 operations Switching frequency max. 5000/h notice All indications about the cable section are including the conductor ferrules. Design of actuating element Roller lever actuating torque min. 15 Ncm Bounce duration in accordance with actuating speed Switchover time in accordance with actuating speed Positive break torque 18.5 Ncm Actuating speed with actuating angle 30° to switch axis - Min. Actuating speed 4122 mm/min - Max. Actuating speed 1 m/s Ambient conditions Ambient temperature - Min. environmental temperature −30 °C - Max. environmental temperature +80 °C Protection class IP67 Electrical data Design of control element Normally open contact (NO) Switching principle Creep circuit element Number of auxiliary contacts 2 piece Number of safety contacts 0 piece Rated impulse withstand voltage Uimp 6 kV Rated insulation voltage Ui 500 V Thermal test current Ithe 10 A Utilisation category AC-15: 230 V / 4 A, DC-13: 24 V / 1 A Required rated short-circuit current 1000 A Max. fuse rating 6 A gG D-fuse Dimensions Dimensions of the sensor - Width of sensor 30 mm - Height of sensor 112 mm - Length of sensor 46 mm notice Switch with 2 NO contacts are not for security tasks Diagram Note Diagram positive break NC contact active no active Normally-open contact Normally-closed contact Switch travel diagram Notes Switch travel diagram Contact closed Contact open Setting range Break point Positive opening sequence/- angle VS adjustable range of NO contact VÖ adjustable range of NC contact N after travel Ordering suffix The applicable ordering suffix is added at the end of the part number of the safety switch. Order example: TV14H 236-20z-1637 ...-1637 0,3 µm gold-plated contacts ...-NPT Cable entry NPT 1/2“ ...-1297 Enclosure with transverse slotted holes ...- ID IDC method of termination ...-Z Actuator head gasket ...-RMS Available with metal roller M12 connector with A-coding Rated impulse withstand voltage Uimp: 0,8 kV Rated insulation voltage Ui: 50 V Operating current Ie: AC-15 50 V / 4 A ...-ST Caution! The versions with connector may only be used in PELV circuits to EN 60204-1. M12 connector with B-coding Rated impulse withstand voltage Uimp: 0,8 kV Rated insulation voltage Ui: 50 V Operating current Ie: AC-15 50 V / 4 A ...-2310 Caution! The versions with connector may only be used in PELV circuits to EN 60204-1. Ordering code (1)(2) 2(3)6-(4)Z(5)-(6)-(7)-(8)-(9) (1) Z Snap action T Slow action (2) S Plunger S R Roller plunger R 4S Plunger 4S 4R Roller plunger 4R 1R Offset roller lever 1R K Offset roller lever K 3K Angle roller lever 3K 4K Angle roller lever 4K K4 Angle roller lever K4 1H Roller lever 1H 7H Roller lever 7H 10H Rod lever 10H 12H Roller lever 12H 14H Roller lever 14H AF Spring rod lever AF (3) 3 slim design 5 large design (4) 02 2 Opener (NC) 11 1 Normally open contact (NO) / 1 Opener (NC) 20 2 Normally open contact (NO), (Switch with 2 NO contacts are not for security tasks) (5) H Slow action with staggered contacts UE Slow action with overlapping contacts (6) without Cable entry M20 ID IDC method of termination NPT cable entry NPT 1/2" ST M12 connector with A-coding ST-2310 M12 connector with B-coding (7) 1297 Enclosure with transverse slotted holes (8) 2138 Roller lever 7H for Position switches with safety function (9) 1637 gold-plated contacts Documents Operating instructions and Declaration of conformity (da) 304 kB, 21.08.2013 Code: mrl_ZT235_236_da Operating instructions and Declaration of conformity (de) 305 kB, 06.03.2014 Code: mrl_ZT235_236_de Operating instructions and Declaration of conformity (en) 338 kB, 06.03.2014 Code: mrl_ZT235_236_en Operating instructions and Declaration of conformity (pl) 358 kB, 16.04.2014 Code: mrl_ZT235_236_pl Operating instructions and Declaration of conformity (pt) 323 kB, 15.07.2014 Code: mrl_ZT235_236_pt Operating instructions and Declaration of conformity (es) 303 kB, 02.01.2013 Code: mrl_ZT235_236_es Operating instructions and Declaration of conformity (it) 300 kB, 16.04.2014 Code: mrl_ZT235_236_it Operating instructions and Declaration of conformity (fr) 321 kB, 16.04.2014 Code: mrl_ZT235_236_fr Operating instructions and Declaration of conformity (jp) 574 kB, 16.04.2014 Code: mrl_ZT235_236_jp Operating instructions and Declaration of conformity (nl) 318 kB, 16.04.2014 Code: mrl_ZT235_236_nl CCC certification (cn) 150 kB, 03.08.2015 Code: q_235p02 CCC certification (en) 170 kB, 03.08.2015 Code: q_235p01 EAC certification (ru) 844 kB, 05.10.2015 Code: q_6037p17_ru Images Dimensional drawing (basic component) Dimensional drawing (actuator) K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am 22.02.2016 - 21:31:01h Kasbase 3.2.1.F.64I