�� �� ��� �� 150mm 500W PS/2 ATX Power Supply with active PFC Japan made capacitor 80 PLUS and SCP, OCP,OPP PLUTO-D5001PJ FEATURES 500W 500W „ Meets ATX 12V V2.3 standard PS/2 A PS/2 ATX TX „ Dual forward converter design „ Support Intel Core i series and Xeon Series CPU „ Active PFC (power factor correction) > 0.99 „ Double independent +12V output „ Power Efficiency (25°C and 50°C can meet the minimum efficiency(80%) for all loading conditions (20%,50,100%)) „ Leakage current: Less 3.5 mA-rms at 264Vac, 60 Hz „ Made in Japan capacitor (RUBYCON) 85mm „ Fan Control (Internal 80mm fan) „ Remote ON/OFF Control „ Hold-up Time in 16ms „ Power Good signal : TTL compatible on delay 100ms to 500ms „ Short Circuit Protection „ Over Voltage Protection „ Over Power Protection INPUT SPECIFICATION Input Voltage 90V~264V AC 20 Pin 6+2 Pin 4 Pin 4Pin FDD SATA 4+4 Pin Input Frequency 50-60Hz To ensure PSU has well-appointed output for various devices in industrial Input Current 10A@115V,8A@230V environment, PLUTO-D5001PJ provides powerful output with dual +12V for different IPC applications. For quality output in PLUTO-D5001PJ, OUTPUT SPECIFICATION RUBYCON Japanese capacitors are used to reduce current leakage and Wattage 500W lower ESR. It helps PLUTO-D5001PJ to maintain high level of stability Efficiency >=80% and reliability output for various valuable machine. PLUTO-D5001PJ Holdup Time 16ms, at full load also passed 50°C, 12hours at 100% loading Burn-in test which shows Over Voltage Protection 3.3V@4.8V, 5V@7.0V, 12V@15.6V its high reliability. In addition, PLUTO-D5001PJ remains 80% de-rating EMI & Safety Approval CE, CB, FCC, VCCI, UL, TUV, 80PLUS output at 50°C which allows the whole system to work in high temperature environment. Over Power/ Outpout power over 120%~160% 80PLUS certification can reduce energy consumption and hence to save Load Protction cost of electricity, therefore, PLUTO-D5001PJ can be high efficient and DC OUTPUT keep green at the same time. +5V +3.3V +12V1 +12V2 -12V +5Vsb Max.Load 22A 24A 28A 20A 0.3A 2.5A MECHANICAL DRAWING Mini.Load 1A 1A 1A 1A 0A 0A �� ��� Max.Watt 130W 456W Ripple 50mV 50mV 120mV 120mV 120mV 50mV Noise 50mV 50mV 120mV 120mV 120mV 50mV GENERAL SPECIFICATION MTBF 100,000 Hours at 100% loading Temperature/ Storage: -40°C to +70°C, 10% to 95% Humidity (non-condensing) Operation: 5°C to +50°C, 20% to85% (non-condensing) Dimension (W x D x H) 150 x 140 x 85mm; 5.9" x 7.2" x 3.4" Risetime 10 ms. ��� ��� 20/24 Pin 6+2 Pin 4+4 Pin 4 Pin x3 4Pin FDD SATA x4 PSU-PLUTO-D5001PJ 54 140mm