81.5mm 250W Flex form factor Power supply with Active PFC Japan made capacitor PLUTO-A2501PJ 80 PLUS and OVP, OCP, SCP FEATURES 250W 250W 250W 250W 250W 250W 250W 250W F Fle lex A x ATX TX „ Power Efficiency (25°C and 50°C can meet the F Fle lex A x ATX TX Flex ATX Flex ATX minimum efficiency (80%) for all loading conditions F Fle lex A x ATX TX (20%,50,100%)) „ Made in Japan capacitor (NCC and RUBYCON) „ Support Intel Cerelon series „ Fan Control (Internal 4 cm fan) „ Audible Noise (40 dB ± 4dB) „ Remote on/off Control 40.5mm „ Hold-up Time in 17ms „ Power Good signal : TTL compatible on delay 100ms to 500ms, off delay 1ms „ Over Temperature Protection „ Short Circuit Protection „ Over Voltage Protection „ Over Current Protection INPUT SPECIFICATION Input Voltage 90V~264V AC Input Frequency 47Hz~63Hz 4Pin P4_12V 20 Pin 4 Pin 4Pin FDD SATA Input Current 4.0A@90V and 264V In an attempt to provide stable output and high reliability for different applications (communications, networks, servers and work stations), OUTPUT SPECIFICATION Portwell conducted a research to provide suitable PSU. In PLUTO series, Wattage 250W only high quality components to meet those requirements are chosen. The electrical characteristics of the PSU describe the quality of its outputs. Efficiency >=80% In PLUTO-A2501PJ, all capacitors are from Japanese manufacturers: Holdup Time 17ms, at full load NCC and RUBYCON. The case material of PLUTO-A2501PJ is SECC Over Voltage Protection +5V:5.5V~6.8V, +12V:13.2V~16.0V, that comes with high thermal conductive properties which helps to provide +3.3V:3.7V~4.6V higher heat dissipating capacity. Over Current Protection +5V:20A, +12V:20A, +3.3V:18A High reliability is also an important feature for PLUTO-A2501PJ. Burn-in EMI & Safety Approval CE, CB, FCC, VCCI, UL, TUV, 80PLUS test in 0°C and 50°C for 12 hours at 100% loading is performed. In such test, PLUTO-A2501PJ can meet various environment standards and keep DC OUTPUT stable and efficient. For the benefit of valuable machine and data, PLUTP-A2501PJ provides +5V +3.3V +12V -12V +5Vsb full protection including Over Temperature Protection, Short Circuit Max.Load 12A 10A 16A 0.3A 2A Protection, Over Voltage Protection, and Over Current Protection. Min.Load 1.0A 0.5A 1.0A 0A 0A Load Reg. ±5% ±5% ±5% ±5% ±5% Ripple 100mV 100mV 20mV 200mV 200mV MECHANICAL DRAWING Noise 100mV 100mV 20mV 200mV 200mV ��.��±�.�� GENERAL SPECIFICATION MTBF 100,000 Hours at 100% loading Storage: -40°C to +70°C, 5% to 25% Temperature/ (non-condensing) Operation: 0°C to Humidity +50°C, 5% to 85% (non-condensing) Dimension (W x D x H) 81.5 x 150 x 40.5mm; 5.9” x 3.2” x 1.6” Storage altitude -75.03~15250 meter Operation altitude -75.03~3000 meter Risetime 0.1 ms to 20 ms. ��.��±�.�� ��.��±�.�� ��.��±�.�� ��.��±�.�� 20/24 Pin SATA x2 4Pin P4_12V x2 4 Pin 4Pin Fdd PSU-PLUTO-A2501PJ 56 150mm ���.��±�.� ���.��±�.� ��.��±�.�� ��.��±�.�� ���.��±�.�