NEXCOM VTC 7120-D1K

Description
Intel® Celeron® Fanless In-Vehicle Computer with Isolation GPIO, COM and ODBII
VTC 7120-D1K, adopting the high performance processor, Intel® Celeron® is a new generation of VTC series. In additional to keep the advantage of existing VTC series, it offers dual LAN ports for redundancy, two high speed interface for storage, 2.5" SATA and CFast. The storage is easily accessible from the front side for maintenance concern. Furthermore, it offers the ODBII for heavy duty truck such as SAE J1939/J1708 and isolation digital input, output, RS-232 and RS-422/485. With the rich features, VTC 7120-D1K can satisfy your demand in vehicle applications.
Part Number
VTC 7120-D1K
Price
Request Quote
Manufacturer
NEXCOM
Lead Time
Request Quote
Category
Mobile Computing » In-Vehicle PCs
Specifications
CPU\
Intel® Core™ Celeron® Processor 847E 1.1GHz
Main Chipset
QM67
Memory
One 204-pin DDR3 1333MHz SO-DIMM slot (up to 8GB)
Expansion
1 x mini-PCIe socket (PCIe + USB) for WLAN option
1 x mini-PCIe socket (USB) for WWAN option
1 x Bluetooth module for option
1 x On board uBlox NEO-6Q GPS module or optional GPS with dead reckoning
I/O Interface-Front
1 x Line-out, 1 x Mic-in (for WWAN CM8000 voice communication)
2 x SIM card socket (selectable)
1 x System reset button
1 x USB 2.0 host type A connector
1 x Power button
1 x CFast with protection cover
1 x Accessible 2.5" SATA II SSD tray (optional lockable storage available)
2 x DB9 isolation RS-422/485
3 x DB9 isolation RS-232
4 x LED's for power, storage, WLAN/WWAN and GPIO
I/O Interface-Rear
1 x 9 ~ 36VDC input with ignition and 29.5W typical power consumption
1 x 12V/4A DC output, SMBus
1 x DB26 LVDS interface with 12V and USB 2.0
1 x DB-15 VGA
1 x DB9 RS-232 (default) or optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
1 x DB9 RS-422/485
1 x DB9 female connector for 4 x DI and 4 x DO(Digital Input)Input voltage (Internal Type): 5VDC TTL (default)Input voltage (Source Type): 3 ~ 12VDC(Digital Output)Digital output (Sink Type): 5VD CTTL (default), max current: 20mADigital output (Source Type): 3 ~ 24VDC, max current: 250mA
10-Pin terminal block for 8 x DI and 8 x DOIsolation: 5K Vrms(Isolated Digital Input)Input voltage (Internal Type): 5VDC TTL (default)Input voltage (Source Type): 3 ~ 12VDC(Isolated Digital Output)Digital output (Sink Type): 5VDCTTL (default), max current: 20mADigital output (Source Type): 3 ~ 24VDC, max current: 250mA
5-Pin terminal block for 3 x analog inputIsolation: 2K Vrms2 x isolated analog voltage input 12VDC (Max.)1 x isolated analog current input 10A (Max.)
2 x USB 2.0 host type A connector
2 x RJ45 with LEDs for 10/100/1000Mbps Ethernet
1 x Line-out, 1 x Mic-in
1 x DB9 male connector for 1 x ODBII (deafult) or 2 x OBDII (option)
1 x SMA-type GPS antenna connector
4 x Antenna hole reserved for SMA-type antenna connector (WWAN/WLAN/BT)
Power Management
Selectable boot-up & shut-down voltage for low power protection by software
Setting 8-level on/off delay time by software
Status of ignition and low voltage status can be detected by software
Support S3/S4 suspend mode
Operating System
Windows XP/WES2009
WES 7E
Win7 Pro for Embedded
Linux 2.6
Dimensions
260mm (W) x 176mm (D) x 90.1mm (H) (10.24" x 6.93" x 3.51")
3.89 Kg (8.57 Lb)
Construction
Aluminum enclosure with fanless design
Environment
Operating temperatures:-30°C to 50°C (w/ industrial SSD) with air flow-20°C to 45°C (w/ commercial HDD) with air flow
Storage temperatures: -35°C to 85°C
Relative humidity: 10% to 90% (non-condensing)
Vibration (random): 1g@5 ~ 500 Hz (in operation, SSD)
Vibration (SSD):Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposureStorage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
Shock (SSD):Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20gNon-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Standards/ Certifications
CE approval
FCC Class A
e13 Mark
Categorization Information
Mobile Computing Solutions
In-Vehicle PC
Features
- Build-in Intel® Celeron® Processor 847E 1.1GHz
- Support two Ethernet LAN ports
- Removable 2.5" SSD tray and CFast slot
- Optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
- Support two SIM card slots
- PCI-104 socket
- 9 ~ 36V wide range DC power input
- Smarter power management and low voltage protection
- Support isolation digital input/output and analog input
- Rugged fanless design to meet MIL standard
- Support Isolation RS-232 and RS-422/485
- Wake on RTC/SMS via WWAN module
Datasheet
Extracted Text
® ® Intel Celeron Fanless In-Vehicle Computer VTC 7120-D1K with Isolation GPIO, COM and ODBII Main Features ® ® 9 ~ 36V wide range DC power input Build-in Intel Celeron processor 847E 1.1GHz Smarter power management and low voltage protection Support two Ethernet LAN ports Support isolation digital input/output and analog input Removable 2.5" SSD tray and CFast slot Rugged fanless design to meet MIL standard Optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939) Support Isolation RS-232 and RS-422/485 Support two SIM card slots Wake on RTC/SMS via WWAN module PCI-104 socket Product Overview ® ® VTC 7120-D1K, adopting the high performance processor, Intel Celeron is a new generation of VTC series. In additional to keep the advantage of existing VTC series, it offers dual LAN ports for redundancy, two high speed interface for storage, 2.5” SATA and CFast. The storage is easily accessible from the front side for maintenance concern. Furthermore, it offers the ODBII for heavy duty truck such as SAE J1939/J1708 and isolation digital input, output, RS-232 and RS-422/485. With the rich features, VTC 7120-D1K can satisfy your demand in vehicle applications. Specifications 1 x DB26 LVDS interface with 12V and USB 2.0 1 x DB-15 VGA CPU 1 x DB9 RS-232 (default) or optional CAN/OBDII module ® ® Intel Core™ Celeron Processor 847E 1.1GHz (CAN Bus 2.0B or OBDII SAE J1939) Main Chipset 1 x DB9 RS-422/485 QM67 1 x DB9 female connector for 4 x DI and 4 x DO (Digital Input) Memory Input voltage (Internal Type): 5VDC TTL (default) One 204-pin DDR3 1333MHz SO-DIMM slot (up to 8GB) Input voltage (Source Type): 3 ~ 12VDC (Digital Output) Expansion 1 x mini-PCIe socket (PCIe + USB) for WLAN option Digital output (Sink Type): 5VD CTTL (default), max current: 20mA 1 x mini-PCIe socket (USB) for WWAN option Digital output (Source Type): 3 ~ 24VDC, max current: 250mA 1 x Bluetooth module for option 10-Pin terminal block for 8 x DI and 8 x DO 1 x On board uBlox NEO-6Q GPS module or optional GPS with dead Isolation: 5K Vrms (Isolated Digital Input) reckoning Input voltage (Internal Type): 5VDC TTL (default) I/O Interface-Front Input voltage (Source Type): 3 ~ 12VDC 1 x Line-out, 1 x Mic-in (for WWAN CM8000 voice communication) (Isolated Digital Output) 2 x SIM card socket (selectable) Digital output (Sink Type): 5VDCTTL (default), max current: 20mA 1 x System reset button Digital output (Source Type): 3 ~ 24VDC, max current: 250mA 1 x USB 2.0 host type A connector 5-Pin terminal block for 3 x analog input 1 x Power button Isolation: 2K Vrms 1 x CFast with protection cover 2 x isolated analog voltage input 12VDC (Max.) 1 x Accessible 2.5" SATA II SSD tray 1 x isolated analog current input 10A (Max.) (optional lockable storage available) 2 x USB 2.0 host type A connector 2 x DB9 isolation RS-422/485 2 x RJ45 with LEDs for 10/100/1000Mbps Ethernet 3 x DB9 isolation RS-232 1 x Line-out, 1 x Mic-in 4 x LED's for power, storage, WLAN/WWAN and GPIO 1 x DB9 male connector for 1 x ODBII (deafult) or 2 x OBDII (option) I/O Interface-Rear 1 x SMA-type GPS antenna connector 1 x 9 ~ 36VDC input with ignition and 29.5W typical power consumption 4 x Antenna hole reserved for SMA-type antenna connector 1 x 12V/4A DC output, SMBus (WWAN/WLAN/BT) Vehicle Telematics Computer www.nexcom.com Dimension Drawing 286.40 274.40 260.00 176.00 Power Management Ordering Information Selectable boot-up & shut-down voltage for low power protection by software VTC 7120-D1K (P/N: 10V00712002X0) Setting 8-level on/off delay time by software ® ® Intel Celeron 847E 1.1GHz, Industrial Grade 2GB DDR3 SODIMM, Status of ignition and low voltage status can be detected by software LVDS/VGA Output, 1 x RS-232, 1 x RS-422/485 with isolation DI/DO, Support S3/S4 suspend mode COM and 1 x OBDII (SAEJ 1939 or J1708) Operating System Optional Accessories Windows XP/WES2009 WES 7E Part No. Description Win7 Pro for Embedded 10VD0100000X0 VMD 1000-B 7" monitor w/touch screen Linux 2.6 10VD0100101X0 VMD 1001-B 7" Monitor w/touch screen, VGA interface 10VD0200000X0 VMD 2000-B 8" Monitor w/touch screen Dimensions 260mm (W) x 176mm (D) x 90.1mm (H) (10.24" x 6.93" x 3.51") 10VK0071F00X0 VTK 71F, fan Kit 3.89 Kg (8.57 Lb) Wireless mini card kit, Ralink 802.11b/g/n 2T2R, 10VK0006013X0 QCOM: Q802XKN5F, w/antenna & cable Construction (without assembly in NEXCOM) Cinterion PHS8-P kit, Five bands, UMTS/HSPA (850/800, Aluminum enclosure with fanless design 10VK0WWAN01X0 900, 1900 and 2100 MHz), Quad-Band GSM w/internal Environment cable, antenna & packing (without assembly in NEXCOM) Operating temperatures: Bluetooth kit, QCOM: QBTM400-01(V7), w/antenna & 10VK0006007X0 -30°C to 50°C (w/ industrial SSD) with air flow cable (without assembly in NEXCOM) -20°C to 45°C (w/ commercial HDD) with air flow 7400120002X00 Power adapter FSP: 120-AAB (N09001), 120W 19V/6.3A Storage temperatures: -35°C to 85°C Internal cable for GSM/WLAN/GPS antenna connection 60233SAM03X00 Relative humidity: 10% to 90% (non-condensing) MOQ: 20 pcs Vibration (random): 1g@5 ~ 500 Hz (in operation, SSD) 60233SAM05X00 GPS antenna/5m/SMA180P Vibration (SSD): 60233SAM07X00 GSM/GPRS antenna, SMA, support 850, 900, 1800, 1900 Operating: MIL-STD-810G, Method 514.6, Category 4, common 60233SMA30X00 GPS+GSM combo antenna 5M/SMA180P carrier US highway truck vibration exposure GPRS/UMTS/HSDPA antenna, SMA, support 850, 900, Storage: MIL-STD-810G, Method 514.6, Category 24, minimum 60233SAM17X00 1800, 1900 and 2100 MHz integrity test 60233SAM07X00 GSM/GPRS antenna, SMA, support 850, 900, 1800, 1900 Shock (SSD): 60233SMA30X00 GPS+GSM combo antenna 5M/SMA180P Operating: MIL-STD-810G, Method 516.6, Procedure I, functional GPRS/UMTS/HSDPA antenna, SMA, support 850, 900, shock=20g 60233SAM17X00 1800, 1900 and 2100 MHz Non-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g Standards/Certifications CE approval FCC Class A e13 Mark Vehicle Telematics Computer We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 11/25/2015 Ø4 Ø4 90.10 92.00 132.00 96.10 172.00
Frequently asked questions
Why choose IPC Station?

What is IPC Station' warranty policy for the VTC 7120-D1K?

What carriers does IPC Station use to ship parts?

Does IPC Station sell to international (non-USA) customers?

What methods of payment does IPC Station accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods