IPC Station

Description

Intel® Core™ i7 Fanless In-Vehicle Computer with Isolation GPIO, COM and OBDII
VTC 7110-D1K, adopting the high performance processor, Intel® Core™ i7, is a new generation of VTC series. In additional to keep the advantage of existing VTC series, it offers dual LAN ports for redundancy, two high speed interface for storage, 2.5" SATA and CFast. The storage is easily accessible from the front side for maintenance concern. Furthermore, it offers the OBDII for heavy duty truck such as SAE J1939/J1708 and isolation digital input, output, RS-232 and RS-422/485. With the rich features, VTC 7110-D1K can satisfy your demand in vehicle applications.

Part Number

VTC 7110-D1K

Price

Request Quote

Manufacturer

NEXCOM

Lead Time

Request Quote

Category

Mobile Computing » In-Vehicle PCs

Specifications

CPU

Intel® Core™ i7 2610UE 1.5GHz

Main Chipset

QM67

Memory

One 204-pin DDR3 1333MHz SO-DIMM slot (up to 8GB)

Expansion

1 x mini-PCIe socket (PCIe + USB) for WLAN option
1 x mini-PCIe socket (USB) for WWAN option
1 x Bluetooth module for option
1 x on board uBlox NEO-6Q GPS module or optional GPS with dead reckoning

I/O Interface-Front

1 x Line-out, 1 x Mic-in (for WWAN CM8000 voice communication)
2 x SIM card socket (selectable)
1 x System reset button
1 x USB 2.0 host type A connector
1 x Power button
1 x CFast with protection cover
1 x Accessible 2.5" SATA II SSD tray (optional lockable storage available)
2 x DB9 isolation RS-422/485, Isolation: 5K Vrms
3 x DB9 isolation RS-232, Isolation: 5K Vrms
4 x LED's for power, storage, WLAN/WWAN and GPIO
G sensor

I/O Interface-Rear

1 x 9 ~ 36VDC input with ignition and 38W typical power consumption
1 x 12V/4A DC output, SMBus
1 x DB26 LVDS interface with 12V and USB 2.0
1 x DB-15 VGA
1 x DB9 RS-232 (default) or optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
1 x DB9 RS-422/485
1 x DB9 female connector for 4 x DI and 4 x DO(Digital Input)Input voltage (Internal Type): 5VDC TTL (default)Input voltage (Source Type): 3 ~ 12VDC(Digital Output)Digital output (Sink Type): 5VDC TTL (default), max current: 20mADigital output (Source Type): 3 ~ 24VDC, max current: 250mA
10-Pin terminal block for 8 x DI and 8 x DOIsolation: 5K Vrms(Isoated Digital Input)Input voltage (Internal Type): 5VDC TTL (default)Input voltage (Source Type): 3 ~ 12VDC(Isoated Digital Output)Digital output (Sink Type): 5VDCTTL (default), max current: 20mADigital output (Source Type): 3 ~ 24VDC, max current: 250mA
5-Pin terminal block for 3 x analog inputIsolation: 2K Vrms2 x isolated analog voltage input 12VDC (Max.)1 x isolated analog current input 10A (Max.)
2 x USB 2.0 host type A connector
2 x RJ45 with LEDs for 10/100/1000Mbps Ethernet
1 x Line-out, 1 x Mic-in
1 x DB9 male connector for 1 x OBDII (default) or 2 x OBDII (option)
1 x SMA-type GPS antenna connector
4 x Antenna hole reserved for SMA-type antenna connector (WWAN/WLAN/BT)

Power Management

Selectable boot-up & shut-down voltage for low power protection by software
Setting 8-level on/off delay time by software
Status of ignition and low voltage status can be detected by software
Support S3/S4 suspend mode

Operating System

Windows XP/WES2009
WES 7E
Win7 Pro for Embedded
Linux 2.6

Dimensions

260mm (W) x 176mm (D) x 90.1mm (H) (10.24" x 6.93" x 3.51")
3.89 Kg (8.57 Lb)

Construction

Aluminum enclosure with fanless design

Environment

Operating temperatures:-30°C to 50°C (w/ industrial SSD) with air flow-20°C to 45°C (w/ commercial HDD) with air flow
Storage temperatures: -35°C to 85°C
Relative humidity: 10% to 90% (non-condensing)
Vibration (random): 1g@5 ~ 500 Hz (in operation, SSD)
Vibration (SSD):Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposureStorage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
Shock (SSD):Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20gNon-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g

Standards/ Certifications

CE approval
FCC Class A
e13 Mark

Categorization Information

Mobile Computing Solutions
In-Vehicle PC

Features

Build-in Intel® Core™ i7 2610UE 1.5G Hz processor
Support two Ethernet LAN ports
Removable 2.5" SSD tray and CFast slot
Optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939)
Support two SIM card slots
PCI-104 socket
9 ~ 36V wide range DC power input
Smarter power management and low voltage protection
Support isolation digital input/output and analog input
Rugged fanless design to meet MIL standard
Support Isolation RS-232 and RS-422/485
Wake on RTC/SMS via WWAN module

Datasheet

cae184d3-1886-433e-a2ae-780c9b1e5504.pdf

1454 KiB

Download

Extracted Text

® Intel Core™ i7 Fanless In-Vehicle Computer VTC 7110-D1K with Isolation GPIO, COM and OBDII Main Features ® 9 ~ 36V wide range DC power input Build-in Intel Core™ i7 2610UE 1.5G Hz processor Smarter power management and low voltage protection Support two Ethernet LAN ports Support isolation digital input/output and analog input Removable 2.5" SSD tray and CFast slot Rugged fanless design to meet MIL standard Optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939) Support Isolation RS-232 and RS-422/485 Support two SIM card slots Wake on RTC/SMS via WWAN module PCI-104 socket Product Overview ® VTC 7110-D1K, adopting the high performance processor, Intel Core™ i7, is a new generation of VTC series. In additional to keep the advantage of existing VTC series, it offers dual LAN ports for redundancy, two high speed interface for storage, 2.5" SATA and CFast. The storage is easily accessible from the front side for maintenance concern. Furthermore, it offers the OBDII for heavy duty truck such as SAE J1939/J1708 and isolation digital input, output, RS-232 and RS-422/485. With the rich features, VTC 7110-D1K can satisfy your demand in vehicle applications. Specifications 1 x DB26 LVDS interface with 12V and USB 2.0 CPU 1 x DB-15 VGA ® Intel Core™ i7 2610UE 1.5GHz 1 x DB9 RS-232 (default) or optional CAN/OBDII module (CAN Bus 2.0B or OBDII SAE J1939) Main Chipset 1 x DB9 RS-422/485 QM67 1 x DB9 female connector for 4 x DI and 4 x DO Memory (Digital Input) Input voltage (Internal Type): 5VDC TTL (default) One 204-pin DDR3 1333MHz SO-DIMM slot (up to 8GB) Input voltage (Source Type): 3 ~ 12VDC Expansion (Digital Output) 1 x mini-PCIe socket (PCIe + USB) for WLAN option Digital output (Sink Type): 5VDC TTL (default), max current: 20mA 1 x mini-PCIe socket (USB) for WWAN option Digital output (Source Type): 3 ~ 24VDC, max current: 250mA 1 x Bluetooth module for option 10-Pin terminal block for 8 x DI and 8 x DO 1 x on board uBlox NEO-6Q GPS module or optional GPS with dead reckoning Isolation: 5K Vrms (Isoated Digital Input) I/O Interface-Front Input voltage (Internal Type): 5VDC TTL (default) 1 x Line-out, 1 x Mic-in (for WWAN CM8000 voice communication) Input voltage (Source Type): 3 ~ 12VDC 2 x SIM card socket (selectable) (Isoated Digital Output) 1 x System reset button Digital output (Sink Type): 5VDCTTL (default), max current: 20mA 1 x USB 2.0 host type A connector Digital output (Source Type): 3 ~ 24VDC, max current: 250mA 1 x Power button 5-Pin terminal block for 3 x analog input 1 x CFast with protection cover Isolation: 2K Vrms 1 x Accessible 2.5” SATA II SSD tray 2 x isolated analog voltage input 12VDC (Max.) (optional lockable storage available) 1 x isolated analog current input 10A (Max.) 2 x DB9 isolation RS-422/485, Isolation: 5K Vrms 2 x USB 2.0 host type A connector 3 x DB9 isolation RS-232, Isolation: 5K Vrms 2 x RJ45 with LEDs for 10/100/1000Mbps Ethernet 4 x LED's for power, storage, WLAN/WWAN and GPIO 1 x Line-out, 1 x Mic-in G sensor 1 x DB9 male connector for 1 x OBDII (default) or 2 x OBDII (option) I/O Interface-Rear 1 x SMA-type GPS antenna connector 1 x 9 ~ 36VDC input with ignition and 38W typical power consumption 4 x Antenna hole reserved for SMA-type antenna connector 1 x 12V/4A DC output, SMBus (WWAN/WLAN/BT) Vehicle Telematics Computer www.nexcom.com Dimension Drawing 286.40 274.40 260.00 176.00 Power Management Ordering Information Selectable boot-up & shut-down voltage for low power protection by software VTC 7110-D1K (P/N: 10V00711007X0) ® Setting 8-level on/off delay time by software Intel Core™ i7 1.5GHz, Industrial Grade 2GB DDR3 SODIMM, LVDS/ Status of ignition and low voltage status can be detected by software VGA Output,1 x RS-232, 1 x RS-485/422 with isolation DI/DO, COM and Support S3/S4 suspend mode 1 x OBDII (SAEJ1939 or J1708) Operating System Optional Accessories Windows XP/WES2009 Part No. Description WES 7E 10VD0100000X0 VMD 1000-B 7" monitor w/touch screen Win7 Pro for Embedded 10VD0100101X0 VMD 1001-B 7" Monitor w/touch screen, VGA interface Linux 2.6 10VD0200000X0 VMD 2000-B 8" Monitor w/touch screen Dimensions 10VK0071F00X0 VTK 71F, fan Kit 260mm (W) x 176mm (D) x 90.1mm (H) (10.24" x 6.93" x 3.51") Wireless mini card kit, Ralink 802.11b/g/n 2T2R, 3.89 Kg (8.57 Lb) 10VK0006013X0 QCOM: Q802XKN5F, w/antenna & cable (without assembly in NEXCOM) Construction Cinterion PHS8-P kit, Five bands, Aluminum enclosure with fanless design UMTS/HSPA (850/800, 900, 1900 and 2100 MHz), 10VK0WWAN01X0 Environment Quad-Band GSM w/internal cable, antenna & packing (without assembly in NEXCOM) Operating temperatures: Bluetooth kit, QCOM: QBTM400-01(V7), w/antenna & -30°C to 50°C (w/ industrial SSD) with air flow 10VK0006007X0 cable (without assembly in NEXCOM) -20°C to 45°C (w/ commercial HDD) with air flow 7400120002X00 Power adapter FSP: 120-AAB (N09001), 120W 19V/6.3A Storage temperatures: -35°C to 85°C Relative humidity: 10% to 90% (non-condensing) Internal cable for GSM/WLAN/GPS antenna connection 60233SAM03X00 MOQ: 20 pcs Vibration (random): 1g@5 ~ 500 Hz (in operation, SSD) Vibration (SSD): 60233SAM05X00 GPS antenna/5m/SMA180P Operating: MIL-STD-810G, Method 514.6, Category 4, common 60233SAM07X00 GSM/GPRS antenna, SMA, support 850, 900, 1800, 1900 carrier US highway truck vibration exposure 60233SMA30X00 GPS+GSM combo antenna 5M/SMA180P Storage: MIL-STD-810G, Method 514.6, Category 24, minimum GPRS/UMTS/HSDPA antenna, SMA, support 850, 900, 60233SAM17X00 integrity test 1800, 1900 and 2100 MHz Shock (SSD): 60233SAM07X00 GSM/GPRS antenna, SMA, support 850, 900, 1800, 1900 Operating: MIL-STD-810G, Method 516.6, Procedure I, functional 60233SMA30X00 GPS+GSM combo antenna 5M/SMA180P shock=20g GPRS/UMTS/HSDPA antenna, SMA, support 850, 900, Non-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash 60233SAM17X00 1800, 1900 and 2100 MHz hazard shock test=75g Standards/Certifications CE approval FCC Class A e13 Mark Vehicle Telematics Computer We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 11/25/2015 Ø4 Ø4 90.10 92.00 132.00 96.10 172.00

Frequently asked questions

IPC Station' parent company, GID Industrial, specializes in procuring industrial parts. We have years of experience finding rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. It is possible for some parts to be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have our own accounts, but we can also use yours if you would prefer. However, we can use other carriers if it will be more convenient for you.

IPC Station will definitely serve you. In fact, much of our business is international, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by IPC Station. We can also accept wire transfers and PayPal, or a check if you're in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products