NEXCOM NEX 605

Description
Mini-ITX, Intel® Atom™ Dual-Core D2550 1.86GHz, 2x DDR3, VGA/ LVDS/ HDMI, 2x GbE, eSATA/ 5x SATA, 4x COM, 8x USB, mPCIe, PCIe x4
NEX 605 is a Mini-ITX industrial MB embedded Intel® Atom™ D2550 1.86GHz dual-core processor, which integrated Intel HD graphic controller SGX545 to support 640MHz/ DX9. NEX 605 supports VGA, LVDS (1x ch. 24-bit up to 1440x 900 @ 60Hz) and HDMI (1080p) by dual displays interface as standard along with two DDR3 SO-DIMMs for max 4GB memory.
Part Number
NEX 605
Price
Request Quote
Manufacturer
NEXCOM
Lead Time
Request Quote
Category
Embedded Computers » Mini-ITX MBs
Specifications
Embedded Support
Intel® Atom™ processor D2550 1.86GHz CPU
Main Memory
Dual 204-pin SO-DIMMs support DDR3 up to 4GB SDRAM
800/1066MHz
Platform Control Hub
Intel® ICH10R support Intel® Matrix Storage technology of RAID 0/1/5/10 configuration
BIOS
AMI BIOS
Plug & Play support
Advanced power management
Advanced configuration & power interface
16M bits SPI ROM
On-board LAN
2x Intel® 82574L PCI Express Gigabit Ethernet
Support boot from LAN (PXE)
2x RJ45 with LEDs build-in 2x dual stackable USB type A connectors on edge I/O
Display
New 2-chips solution 32nm package Intel® Atom™ processor D2550 integrated 3D graphics engine SGX545, to support up to 640MHz/ DX9 and provides multi-options for high-resolution displays
Analog VGA interface:1 x VGA by DB15 connectorResolution up to 1920x1200 75Hz
HDMI interface:1 x HDMI connectorResolution up to 1920x1200
LVDS interface:Single (24-bit) LVDS, resolution up to 1440 x 900 @ 60Hz by DF13 20-pin LVDS
Inverter (LVDS panel backlight) interface:1x 7-pins CCFL for LCD panel backlight inverter
AudioRealtek ALC886-GR High Definition codec1x Mic-in/ 1x Line-out by audio jack on edge I/O and 1x Line-in by internal 4-pins header
Expansions1 x Mini-PCIe (1x full-size/ SIM tray)1 x PCIe x4 slot
I/O InterfacesSerial port: 4 portsCOM1, RS232 by DB-9 male on edge I/OCOM2, 3, 4 support 3x RS232 ports by 2x 5-pins box header and dual- JST 10pins wafer
8x USB 2.0: Use 9 of 14 ports (ICH10R)4x ports by 2x dual stack USB2.0 on edge I/O (port 0~ 3)4x ports by 2x 5-pins header pitch 2.54mm (port 6~ 9)
1x ports to mini-PCIe slots (port 10)
8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5 V)
Power LED and HDD active LED/ reset/ power on-off by 2x 5-pins header
2x 4-pins fan connector (for CPU and system)
On board Buzzer and SMBus 2.0 by 1x 4-pins, IrDA by 1x 5-pins header
2x 13-pins box header for legacy parallel port/ LPT
2x 13-pins header for 6SATA/ 2GbE LEDs connector
Edge I/O Interfaces
1x dual stack PS2 for Keyboard/ Mouse
1x dual stack DB9 male for COM1 + DB15 female VGA
1x HDMI connector
1x dual stack eSATA (port 1 is default by eSATA)
2x RJ45 LAN + dual stack USB connectors
1x Mic-in/ 1 x Line-out Jack
Watchdog Timer
Watchdog timeout can be programmable by software from 1 second to 255 seconds and from 1 minute to 255 minutes (tolerance 15% under room temperature 25°C)
Storage
Default 1x eSATA by external edge I/O and internal 5x SATA connectors support software RAID 0,1,5 and 10
Optional by DIP-SW1 setting to 2x eSATA by external edge I/O and internal 4x SATA support software RAID 0,1,5 and 10
2 x 13-pins header for 6x SATA/ 2x LAN LEDs connector
System Monitor
Monitoring of 4 voltages and 2 temperatures
4 voltage (Vcore, +12V, +3.3V, 5V)
2 temperatures (CPU, System)
2 fans speed detection
On-board RTC
On-chip RTC with battery backup
1 x External Li-Ion battery
Power Input
Support AT and ATX mode
Power Requirements
Power requirement: ATX Input, jumper AT/ ATX (default) mode
Onboard 2x 12-pins standard ATX version 2.0 power connector
Dimensions
Mini-ITX form factor/ 170mm (L) x 170mm (W) (6.7" x 6.7")
Environment
Operating temperature: -15°C to 60°C
Storage temperature: -20°C to 85°C
Relative humidity: operating 10% to 90%, non-condensing
Certifications
CE approval
FCC Class A
Categorization Information
IoT Automation Solutions
Embedded Computing
Mini-ITX MB
Features
- Intel® Atom™ Dual-Core D2550 1.86GHz processor
- Intel® ICH10R to support software RAID 0/ 1/ 5/ 10
- Dual 204-pins DDR3 SO-DIMMs support max. 4GB SDRAM memory
- Support VGA/HDMI, VGA/LVDS or HDMI/LVDS dual displays
- 8x USB, 4x COM, 2x GbE (Intel), 1x eSATA/ 5x SATA, 1x LPT
- Audio Mic-in/ Line- out, (internal Line-in)
- 1x Mini-PCIe (1x full-size/ SIM tray), 1x PCIe x4
- Standard ATX v.2.0 input by AT/ ATX power mode
Datasheet
Extracted Text
® Mini-ITX, Intel Atom™ Dual-Core D2550 1.86GHz, NEX 605 2 x DDR3, VGA/LVDS/HDMI, 2 x GbE, eSATA/5 x SATA, 4 x COM, 8 x USB, mPCIe, PCIex4 Main F Main Features eatures ® 8 x USB, 4 x COM, 2 x GbE (Intel), 1 x eSATA/5 x SATA, 1 x LPT Intel Atom™ Dual-Core D2550/1.86GHz processor ® Audio Mic-in/Line- out, (internal Line-in) Intel ICH10R to support software RAID 0/1/5/10 1 x Mini-PCIe (1 x full-size/SIM tray), 1 x PCIex4 Dual 204-pins DDR3 SO-DIMMs support max. 4GB SDRAM memory Standard ATX v.2.0 input by AT/ATX power mode Support VGA/HDMI, VGA/LVDS or HDMI/LVDS dual displays Product Overview ® ® NEX 605 is a Mini-ITX industrial MB embedded Intel Atom™ D2550 1.86GHz dual-core processor, which integrated Intel HD graphic controller SGX545 to support 640MHz/DX9.. NEX 605 supports VGA, LVDS (1 x ch. 24-bit up to 1440 x 900 @ 60Hz) and HDMI (1080p) by dual displays interface as standard along with two DDR3 SO-DIMMs for max 4GB memory. ® ® NEX 605 embedded Intel ICH10R chipset to support Intel Matrix Storage Technology up to six SATA 2.0 for RAID 0/1/5/10 (default 1 x eSATA/ ® 5 x SATA, optional 2 x eSATA/4 x SATA) eight USB2.0 (extra 1 x USB2.0 to mPCIe interfaces), two Intel 82574L Gigabit Ethernet controller, one Mini-PCIe full-size slot with SIM stray for standard add-on application and one more PCIex4 slot by add-on PCIe riser card for expansion. NEX 605 is featuring versatile displays, matrix storage devices of eSATA/SATA as RAID for mass storage and riches I/O support for multimedia as well as critical mission of industrial embedded applications. Specifications Embedded Support Display ® ® Intel Atom™ processor D2550 1.86GHz CPU New 2-chips solution 32nm package Intel Atom™ processor D2550 integrated 3D graphics engine SGX545, to support up to 640MHz/ Main Memory DX9 and provides multi-options for high-resolution displays Dual 204-pin SO-DIMMs support DDR3 up to 4GB SDRAM Analog VGA interface: 800/1066MHz 1 x VGA by DB15 connector Resolution up to 1920 x 1200 75Hz Platform Control Hub ® ® HDMI interface: Intel ICH10R support Intel Matrix Storage technology of 1 x HDMI connector RAID 0/1/5/10 configuration Resolution up to 1920 x 1200 BIOS LVDS interface: AMI BIOS Single (24-bit) LVDS, resolution up to 1440 x 900 @ 60Hz by DF13 Plug & Play support 20-pin LVDS Advanced power management Inverter (LVDS panel backlight) interface: Advanced configuration & power interface 1 x 7-pins CCFL for LCD panel backlight inverter 16M bits SPI ROM Audio Realtek ALC886-GR High Definition codec On-board LAN ® 1 x Mic-in/1 x Line-out by audio jack on edge I/O and 1 x Line-in by 2 x Intel 82574L PCI Express Gigabit Ethernet internal 4-pins header Support boot from LAN (PXE) Expansions 2 x RJ45 with LEDs build-in 2 x dual stackable USB type A connectors 1 x Mini-PCIe (1 x full-size/SIM tray) on edge I/O Indutrial Mother Board LPC DMI SGPIO HDA www.nexcom.com Block Diagram Cedarview-D HDMI Microprocessor DDR3 Memory SODIMM - A Controller DDR3-1066 VGA SODIMM - B LVDS CONNECTOR SC LVDS 24 bpps DMI BACK I/O 0,1 SPI DMI x 4 SPI PCT25VF016B 2.5Gb/s BACK I/O 2,3 DMI SPI PIN BASED 6,7 PCIe x1 1-4 PCIe x 4 PIN BASED 8,9 USB INTEL ICH10-R MINI CARD 4 USB PORT 10 TO MINI CARD 10 SATA 2 LAN CONTROLLER RJ45 SATA 5 MDI INTEL: 82574L HDA S/GPIO LPC SATA 3 eSATA 0 LAN CONTROLLER MDI RJ45 6 INTEL: 82574L SATA 4 SATA 1 eSATA 1 SATA 5 COM1-4 LPT MIC-IN SATA SUPPER I/O HD AUDIO LED BLOCK IT8783F/AX-L KB/MS ALC886-GR LINE-OUT IR LINE-IN H/W MONITOR 1 x PCIex4 slot System Monitor I/O Interfaces Monitoring of 4 voltages and 2 temperatures Serial port: 4 ports 4 voltage (Vcore, +12V , +3.3V , 5V) 2 temperatures (CPU, System) COM1, RS232 by DB-9 male on edge I/O 2 fans speed detection COM2, 3, 4 support 3 x RS232 ports by 2 x 5-pins box header and dual- JST 10pins wafer On-board RTC 8 x USB2.0: Use 9 of 14 ports (ICH10R) On-chip RTC with battery backup 4 x ports by 2 x dual stack USB2.0 on edge I/O (port 0 ~ 3) 1 x External Li-Ion battery 4 x ports by 2 x 5-pins header pitch 2.54mm (port 6 ~ 9) Power Input 1 x ports to Mini-PCIe slots (port 10) Support AT and ATX mode 8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5V) Power LED and HDD active LED/reset/power on-off by 2 x 5-pins Power Requirements header Power requirement: ATX Input, jumper AT/ATX (default) mode 2 x 4-pins fan connector (for CPU and system) Onboard 2 x 12-pins standard ATX version 2.0 power connector On board Buzzer and SMBus 2.0 by 1 x 4-pins, IrDA by 1 x 5-pins Dimensions header Mini-ITX form factor/170mm (L) x 170mm (W) (6.7"x 6.7") 2 x 13-pins box header for legacy parallel port/LPT 2 x 13-pins header for 6SATA/2GbE LEDs connector Environment Operating temperature: -15°C to 60°C Edge I/O Interfaces Storage temperature: -20°C to 85°C 1 x dual stack PS2 for Keyboard/Mouse Relative humidity: operating 10% to 90%, non-condensing 1 x dual stack DB9 male for COM1 + DB15 female VGA 1 x HDMI connector Certifications 1 x dual stack eSATA (port 1 is default by eSATA) CE approval 2 x RJ45 LAN + dual stack USB connectors FCC Class A 1 x Mic-in/1 x Line-out Jack Watchdog Timer Ordering Information Watchdog timeout can be programmable by software from 1 second to 255 seconds and from 1 minute to 255 minutes (tolerance 15% NEX 605-2550 (P/N: 10G00060502X0) ® under room temperature 25°C) Mini-ITX, embedded Intel Atom™ Dual-Core D2550/ICH10R, 2DDR3, VGA/LVDS/HDMI, 2GbE, 1 x eSATA/ x SATA, 4COM, 8USB, mPCIe, Storage PCIex4, ATX input Default 1 x eSATA by external edge I/O and internal 5 x SATA NEX 604/NEX 605 CPU Cooler (P/N: 5050300517X00) connectors support software RAID 0,1,5 and 10 Optional CPU cooler for NEX 604/NEX 605 Optional by DIP-SW1 setting to 2 x eSATA by external edge I/O and internal 4 x SATA support software RAID 0,1,5 and 10 2 x 13-pins header for 6 x SATA/2 x LAN LEDs connector Indutrial Mother Board We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 03/05/2014 LVDS VGA DDI0 DDI1 SATA (6) USB 2.0 (14) LCI PCI PCI-E *1(6) DDR3 Ch A
Frequently asked questions
Why choose IPC Station?

What is IPC Station' warranty policy for the NEX 605?

What carriers does IPC Station use to ship parts?

Does IPC Station sell to international (non-USA) customers?

What methods of payment does IPC Station accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods