Manufacturers
NEXCOM MVS 5200
Description
8-CH PoE Premium Mobile NVR
MVS 5200 performs 8-CH live view when keeping recording the video simultaneously without lags. It provides multitasking capability such as running video analytics software like people counting continuously while recording real-time videos.
Part Number
MVS 5200
Price
Request Quote
Manufacturer
NEXCOM
Lead Time
Request Quote
Category
Mobile Computing » Modular Vehicle Computer Systems
Specifications
NVR System
VMS Software Installed- H.264
Audio Codec- G.726/G.711
Live View Resolutions- QVGA/VGA/SXGA/Full HD/3M/5M
Recording Resolution- QVGA~5M
Live Preview- Support 1/4/9 division, full-screen, snapshot
Record- Round the clock/motion record modes/event trigger
Record Device- 2 x 2.5" SATA 2.0 removable HDD/SSD trays with lock
Playback- 1/4/9 division, full-screen/snapshot/display original ratio or fit window- Search mode: Play/reverse/pause/seek/pre frame/next frame- Speeds: 1/4, 1/2, 1, 2, 4, 8, 16, 32
Video Stamp- Capability to show and record vehicle information in video*AMTK camera is required
Camera Setting- Auto search, profile selectable, ONVIF support
Disk Management- Partition management, format partition, S.M.A.R.T status
PC System
CPU- 5th generation Intel® Core™ dual core i3-5010U, 2.1GHz
Memory- 2-channel 204-pin DDR3L SO-DMIM socket support 1600MHz up to 16GB, default 2GB industrial grade memory
Storage- 1 x CFast (externally accessible), 1 x mSATA
Expansion- 1 x full size Mini-PCIe socket (USB 2.0), 1 x full size Mini-PCIe socket (USB 2.0 + PCIe), 1 x full size Mini-PCIe socket (mSATA)
GPS and On Board Sensor- 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou- Optional modules with Dead Reckoning available- Built-in G-sensor
Power over Ethernet- 8-port RJ45 for 10/100/1000 Mbps PoE IEEE 802.3af conformity, total 60W
I/O Interface-Front
PC Function- 4 x LED indicators for power/storage/WLAN/WWAN- 1 x CFast socket with cover. 1 x Reset button- 2 x dual USB type A connectors for 1 x USB 3.0 + 1 x USB 2.0 port- 1 x DB15 connector MCU DIO (2 x DI, 2 x DO), 1 x analog input, 1 x speed frequency input, 1 x iButton, 1 x RS232 (only for RFID reader w/ 12VDC output), 1 x direction signal for optional Dead Reckoning module- 2 x externally accessible SIM card sockets (selectable)- 6 x antenna holes for WWAN/WLAN/BT/GPS
NVR Function- 2 x removable 2.5" HDD/SSD trays with lock- 1 x DB-15 VGA output for live view- 1 x DB-15 VGA input for PC VGA switch
I/O Interface-Rear
8 x RJ45 10/100/1000 Mbps PoE ports- 2 x RJ45 10/100/1000 Intel® Fast Ethernet with LED- 1 x 9~36VDC input with ignition and 80W typical power consumption- 1 x dual USB type A connector for USB 3.0 port + USB 2.0 port- 2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out- 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz- 1 x DB26 LVDS interface with 12V and USB2.0- 2 x DB-9 RS-232/422/485 (w/ optional 3KV isolation protection)- 1 x 12VDC output (2A) + battery bypass DC output (2A) + SM Bus- 1 x 16-pin terminal block connector1 x CAN Bus 2.0B (on board)1 x OBDII from optional VIOB-OBD-03 module (SAE J1939)1 x CAN Bus 2.0B from optional VIOB-CAN-03 module8 x GPIO(4 x Digital inputs, w/ optional 3KV isolation protection)Input voltage (internal type): 5VDC TTL (default)Input voltage (source type): 3 ~ 12VDC(4 x Digital outputs, w/ optional 3KV isolation protection)Digital output (sink type): 5VDC TTL (default), max current: 20mADigital output (source type): 3 ~ 24VDC, max current: 150mA
NVR Function- 2 x USB type A connectors, 1 x Reset button- 1 x switch for VGA input selection (NVR or PC)- 4 x LED indicators for power/storage/storage alarm/camera- 1 x phone jack 3.5mm for 1 x Line-out
Power Management
Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode
Optional internal 1100mAh, Li-Polymer rechargeable battery
Operating System
Windows 7/WES7/Windows 8/WES8/Linux kernel 3.X
Dimensions
260mm (W) x 206mm (D) x 130mm (H) (10.24" x 8.11" x 5.12")
3.3kg
Environment
Operating temperatures (without internal battery):-30°C~50°C (w/ industrial SSD) with air flow
Operating temperatures (with internal battery, discharging):-20°C~45°C (w/ industrial SSD) with air flow
Storage temperatures: -40°C~80°C
Relative humidity: 10% to 90% (non-condensing)
Vibration (random):1.5g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD)
Vibration (SSD/HDD):- Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure- Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
Shock (SSD/HDD):- Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g- Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Certifications
CE approval, FCC Class A, E13 Mark
Categorization Information
Mobile Computing Solutions
Modular Vehicle Computer System
Features
- Multitasking PC + NVR + tracker function
- Vehicle information stamp in video
- 8 x 10/100/1000 Mbps 802.3af PoE ports
- VMS software installed
- 5th generation Intel® Core™ dual core i3-5010U, 2.1GHz
- Dual removable SATA 3.0 SSD/HDD
- 7/24 GNSS tracker function support even PC is off
- Built-in CAN 2.0B. Optional OBDII function (SAE J1939) Product
Datasheet
Extracted Text
MVS 5200 8-CH PoE Premium Mobile NVR Main Features ® 5th generation Intel Core™ dual core i3-5010U, 2.1GHz Multitasking PC + NVR + tracker function Dual removable SATA 3.0 SSD/HDD Vehicle information stamp in video 7/24 GNSS tracker function support even PC is off 8 x 10/100/1000 Mbps 802.3af PoE ports Built-in CAN 2.0B. Optional OBDII function (SAE J1939) VMS software installed Product Overview MVS 5200 performs 8-CH live view when keeping recording the video simultaneously without lags. It provides multitasking capability such as running video analytics software like people counting continuously while recording real-time videos. MVS 5200 mobile network video recorder promotes increased safety and security for bus passenger transportation with high video frame rates and 2 removable extensive storage HDD/SSD capacity. It connects up to 8 IP cameras + PoE function providing reliable and high quality video coverage around the bus. Vehicle information stamp such as location, speed or other critical data can be recorded and shown in video. MVS 5200 leverages wireless networks to simplify fleet management with capabilities such as remote, real-time video monitoring. Vehicle data integration and diagnostics are also carried out via CAN Bus and OBDII. This remote capability keeps transit fleets in service around the clock. MIL-STD-810G for shock and vibration is designed to operate in harsh environments. For added physical security, the pre-alarm function on MVS 5200 features 2 x DI, 2 x DO and GNSS that can operate in power-off state, ensuring vehicle location, alarm and emergency notifications are constantly available at times of intrusion or urgent conditions. Optional back-up battery guards against any unexpected vehicle power failure or unstable vehicle power. Camera Setting Specifications Auto search, profile selectable, ONVIF support NVR System Disk Management VMS Software Installed Partition management, format partition, S.M.A.R.T status H.264 Audio Codec PC System G.726/G.711 CPU ® Live View Resolutions 5th generation Intel Core™ dual core i3-5010U, 2.1GHz QVGA/VGA/SXGA/Full HD/3M/5M Memory Recording Resolution 2-channel 204-pin DDR3L SO-DMIM socket support 1600MHz up to QVGA~5M 16GB, default 2GB industrial grade memory Live Preview Storage Support 1/4/9 division, full-screen, snapshot 1 x CFast (externally accessible), 1 x mSATA Record Expansion Round the clock/motion record modes/event trigger 1 x full size Mini-PCIe socket (USB 2.0), 1 x full size Mini-PCIe socket Record Device (USB 2.0 + PCIe), 1 x full size Mini-PCIe socket (mSATA) 2 x 2.5” SATA 2.0 removable HDD/SSD trays with lock GPS and On Board Sensor Playback 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/ 1/4/9 division, full-screen/snapshot/display original ratio or fit window Galileo/Beidou Search mode: Play/reverse/pause/seek/pre frame/next frame Optional modules with Dead Reckoning available Speeds: 1/4, 1/2, 1, 2, 4, 8, 16, 32 Built-in G-sensor Video Stamp Power over Ethernet Capability to show and record vehicle information in video 8-port RJ45 for 10/100/1000 Mbps PoE IEEE 802.3af conformity, total 60W *AMTK camera is required Modular Vehicle Computer System www.nexcom.com Dimension Drawing 284.8 272.0 4.0 TYP.4 6.0 TYP.4 NUT #6-32 TYP.4 260.0 206.0 4 x LED indicators for power/storage/storage alarm/camera I/O Interface-Front 1 x phone jack 3.5mm for 1 x Line-out PC Function 4 x LED indicators for power/storage/WLAN/WWAN Power Management 1 x CFast socket with cover. 1 x Reset button Selectable boot-up & shut-down voltage for low power protection 2 x dual USB type A connectors for 1 x USB 3.0 + 1 x USB 2.0 port by software. Setting 8-level power on/ off delay time by software. 1 x DB15 connector Support S3/S4 suspend mode - MCU DIO (2 x DI, 2 x DO), 1 x analog input, 1 x speed frequency Optional internal 1100mAh, Li-Polymer rechargeable battery input, 1 x iButton, 1 x RS232 (only for RFID reader w/ 12VDC Operating System output), 1 x direction signal for optional Dead Reckoning module Windows 7/WES7/Windows 8/WES8/Linux kernel 3.X 2 x externally accessible SIM card sockets (selectable) 6 x antenna holes for WWAN/WLAN/BT/GPS Dimensions 260mm (W) x 206mm (D) x 130mm (H) (10.24” x 8.11” x 5.12”) NVR Function 3.3kg 2 x removable 2.5” HDD/SSD trays with lock 1 x DB-15 VGA output for live view Environment 1 x DB-15 VGA input for PC VGA switch Operating temperatures (without internal battery): -30°C~50°C (w/ industrial SSD) with air flow I/O Interface-Rear Operating temperatures (with internal battery, discharging): -20°C~45°C (w/ industrial SSD) with air flow PC Function Storage temperatures: -40°C~80°C 8 x RJ45 10/100/1000 Mbps PoE ports ® Relative humidity: 10% to 90% (non-condensing) 2 x RJ45 10/100/1000 Intel Fast Ethernet with LED Vibration (random): 1 x 9~36VDC input with ignition and 80W typical power consumption 1.5g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD) 1 x dual USB type A connector for USB 3.0 port + USB 2.0 port Vibration (SSD/HDD): 2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out - Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz highway truck vibration exposure 1 x DB26 LVDS interface with 12V and USB2.0 - Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test 2 x DB-9 RS-232/422/485 (w/ optional 3KV isolation protection) Shock (SSD/HDD): 1 x 12VDC output (2A) + battery bypass DC output (2A) + SM Bus - Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g 1 x 16-pin terminal block connector - Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard - 1 x CAN Bus 2.0B (on board) shock test=75g - 1 x OBDII from optional VIOB-OBD-03 module (SAE J1939) - 1 x CAN Bus 2.0B from optional VIOB-CAN-03 module Certifications - 8 x GPIO CE approval, FCC Class A, E13 Mark (4 x Digital inputs, w/ optional 3KV isolation protection) Input voltage (internal type): 5VDC TTL (default) Input voltage (source type): 3 ~ 12VDC Orderin g Information - (4 x Digital outputs, w/ optional 3KV isolation protection) MVS 5200-BK (P/N: 10VS0520000X0) Digital output (sink type): 5VDC TTL (default), max current: 20mA ® 5th generation Intel Core™ dual core i3-5010U, 2.1GHz, 2GB DDR3L Digital output (source type): 3 ~ 24VDC, max current: 150mA industrial grade SO-DIMM, 8 x 10/100/1000 PoE, 2 x 10/100/1000 NVR Function Ethernet, VGA/LVDS output, 2 x RS-232/422/485, 3 x USB, 12VDC 2 x USB type A connectors, 1 x Reset button 1 x switch for VGA input selection (NVR or PC) output, 1 x CAN, VMS software installed Modular Vehicle Computer System We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 02/02/2016 143.0 137.0 120.0 160.0
Frequently asked questions
Why choose IPC Station?
What is IPC Station' warranty policy for the MVS 5200?
What carriers does IPC Station use to ship parts?
Does IPC Station sell to international (non-USA) customers?
What methods of payment does IPC Station accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods