ICEK 8060-T6 - NEXCOM

Description

COM Express Type 6 Starter-Kit Integrated COM Express Compact or Basic Module Bootable mini-SATA/ CFast-SSD on ICEB8060 with 10.4" LCD and Flex-ATX 110/220V AC input

Part Number

ICEK 8060-T6

Price

Request Quote

Manufacturer

NEXCOM

Lead Time

Request Quote

Category

IoT Automation Solutions » Embedded Computing

Specifications

Form factor

Rugged Plastic (HDPE) Suitcase dimension: 47x 42x 12 cm3
Integrated ICEB 8060 Type 2, Carrier CRB for COM Express Basic Module

Display

10.4" AUO, G104SN03 V5

Expansion

1x PCIex16 (Gen 3.0) slot, 1x PEG/ DDI (port B for SDVO/ EBKA2- HDMI)
1x PCIex4 slot, 2x PCIex1 slot and
1x mini-PCIe slot for Wi-Fi with optional SIM tray

Graphic Interfaces

CRT: support analog VGA with DB15 connector on the I/O edge
LVDS: dual channels 18/24-bit LVDS connector (dual DF-13-20P)

Super I/O

iTE IT8783

I/O Interface

Serial COM: 6 ports – 1x edge DB9 connector to support RS232/ 422/ 485 (+5/ +12V by Ring) – 5x internal box-header 2.0 pitch to support RS232
USB 3.0/ 2.0: 8 ports – 4x USB 3.0/ USB2.0 ports by stack Type A on edge – 3x USB 2.0 by 4pins JST 2.0mm header connector – 1x internal USB 2.0 to mini-PCIe slot for external wi-fi module
SATA 2.0: 4 ports – 2x SATA 3.0/ SATA 2.0 ports– 1x mini-SATA by mini-PCIe slot for half-/ full size mSATA-SSD – 1x CFast slot for CFast-SSD/ SATA 2.0
PS/2: 2x 4pins header for Keyboard/ Mouse
GPIO ports: 2x + 8x pins header GPIO from COMe (default 5V TTL/ option 3.3V)

Network

ETH0: LAN chip: from COMe CPU module
ETH1: 2nd. RJ45/ GbE port by Intel 82574L
Support total 2x RJ45/ GbE ports on the edge I/O

Audio

HD Audio AL886 with 5.1 channels
Support external S/PDIF interface
Support internal pin-header for L/R speaker-out 2W/ 4 Ohm

EEPROM

1x 2K EEPROM to record PCI Express Lane configuration
ATMEL AT24C32 (or C02) and address 0x57 or (0xAE)

Watchdog Timer

Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% temperature 25°C)

On-board RTC

On-chip RTC with battery BR2032

Power Input

Build-in AC 110/ 220V Input for Flex-ATX PSU in this Starter-Kit

Features

COM Express Type 6, COM.0, Rev2.0 Evaluation Starter-Kit
COM Express Compact or Basic Modules with passive or active fan-sink
Bootable mini-SATA/ CFast-SSD with 10.4" LCD/ 18-bit LVDS Display
PCIex16, PCIex4, 2x PCIex1, 1x PEG/ DDI/ SDVO and mini-PCIe for Wi-Fi
3xDDI/ 4xUSB3.0/ 2x SATA3.0/ 6x COM/ VGA/ LVDS/ 2x GbE/ 5.1 Audio S/PDIF
Integrated Flex-ATX PSU for AC 110/220V Input

Datasheet

7b99a360-eb6a-47af-824a-dd7350f4f4fe.pdf

257 KiB

Download

Extracted Text

COM Express Type 6 Starter-Kit ICEK 8060-T6 Integrated COM Express Compact or Basic Module Bootable mini-SATA/ CFast-SSD on ICEB8060 with 10.4” LCD and Flex-ATX 110/220V AC input Main Features PCIex16, PCIex4, 2x PCIex1, 1x PEG/DDI/SDVO and mini-PCIe for COM Express Type 6, COM.0, Rev2.0 Evaluation Starter-Kit Wi-Fi COM Express Compact or Basic Modules with passive or active 3x DDI/ 4x USB3.0/ 2x SATA3.0/ 6x COM/ VGA/ LVDS/ 2x GbE/ 5.1 fan-sink Audio S/PDIF Bootable mini-SATA/ CFast-SSD with 10.4” LCD/ 18-bit LVDS Integrated Flex-ATX PSU for AC 110/ 220V Input Display Product Overview NEXCOM ICEK8060-T6 as proof-of-concept as pre- configured system of COM Express starter-kit join- design- win assistance package based on COM Express type 6, pin-out defined by PICMG, COM.0 Rev. 2.0 specification. NEXCOM configure and assembly to order service with COM Express Type 6 Basic Module (125x 95mm) like ICES667 or ICES668 with active heat-sink for embedded processors up to i7-3610QE or i7-3615QE (2x 2.3Ghz/ 6MB/ ® max. TDP 45W) of Intel 3rd. Generation Core™ i7/ i5/ i3 processors to adapt wide range of Industrial and embedded applications. ICEK8060-T6 features bootable CFast/ SSD from external access or mini-SATA/ SSD via mini-PCIe slot (half-/ full-size slot) from internal build-in onto ICEB8060 ICEK8060-T6 also support legacy SATA 2.0 as bootable interfaces. ICEK8060-T6 support added-on card slots of 1x PCIex16, 1x PCIex4, 2x PCIex1 and 1x DDI (port B/ SDVO/ DP/ HDMI) slot may adapt our add-in EBK-A2HDMI (HDMI/ DP) for your evaluation of three independent displays during project development. Faster system Time-to-market: ICEK8060-T6 as Type 6 starter-kit as pre-configured system ready to help your system design customer to reduce total development cycle time from our proof-of-concept and design-assistance support for your target OS and applications. ® ® Various CPU SKUs support Intel 3rd. generation Intel Core™ i7/ i5/ i3, Celeron Mobile processors supported by COM Express Type 6 Basic module (125x 95mm) like ICES667 or ICES668 Longevity for your multi-generation durable equipment: Once you pre-tested your OS and Application onto our ICEK8060-T6 starter-kit, You may easy to design your own customized I/O carrier solution board which you may adapt multiple COM Express modules for your target application. Specifications Expansion: Form factor: 1x PCIex 16 (Gen 3.0) slot, 1x PEG/ DDI (port B for SDVO/ EBKA2- 3 Rugged Plastic (HDPE) Suitcase dimension: 47x 42x 12 cm HDMI) Integrated ICEB 8060 Type 2, Carrier CRB for COM Express Basic 1x PCIex4 slot, 2x PCIex1 slot and Module 1x mini-PCIe slot for Wi-Fi with optional SIM tray Display: Graphic Interfaces: 10.4” AUO, G104SN03 V5 CRT: support analog VGA with DB15 connector on the I/O edge LVDS: dual channels 18/ 24-bit LVDS connector (dual DF-13-20P) Super I/O: iTE IT8783 COM Express COM Express connector C and D COM Express connector A and B www.nexcom.com Block Diagram SATA X 2 SATA x2 BUS R/G/B VGA Connector DB-15 rear IO Connector DDI1 DDI1 (PEGx16 SLOT) mSATA X1 SATA x1 BUS DDI2 Connector DDI2 (Display port rear IO connector) LVDS Channel A DDI3 LVDS A (18/24 bit) CFAST X1 SATA x1 BUS DDI3 (Display port rear IO connector) Connector Connector SPEAKER USB3.0 X 4 USB 2.0 X 2 USB2.0 BUS PIN USB3.0 BUS LVDS Channel B Rear IO connector LVDS B (18/24 bit) Pin Header HEARD Connector USB 2.0 X 4 USB2.0 BUS (rear IO) PCI-E x1 BUS PCIEX1 (LAN2) Giga LAN USB 2.0 X 1 USB2.0 BUS HD Audio interface Audio Codec chip (box header) Rear IO connector AMP (ALC886) PCI-E x1 BUS PCI-E x1 PCI-E x4 PCI-E x4 BUS SLOT X1 SLOT X1 x16 PEG BUS Audio Rear IO Connector PEG x16 PCI-E x1 PCI-E x1 BUS Line IN / Line OUT / MIC IN SLOT X1 SLOT X1 CEN OUT / SIDE OUT / SPDIF Line OUT WIFI/3G PCI-E x1 BUS MiniPCIE X1 SLOT USB2.0 BUS I2C BUS USB 2.0 X 1 EEPROM KB/MS Pin Header COM 2 GPIO BUS GPI *4 RS232/422/485 TTL LEVLE GPO *4 rear IO Connector SUPER I/O LPC BUS IT8783E/AX-L COM 1,3~6 Giga LAN RJ45 TYPE 6 TYPE 6 RS232 Rear IO Connector box header X5 I/O Interface: On-board RTC Serial COM: 6 ports On-chip RTC with battery BR2032 – 1x edge DB9 connector to support RS232/ 422/ 485 (+5/ +12V by Power Input Ring) Build-in AC 110/ 220V Input for Flex-ATX PSU in this Starter-Kit – 5x internal box-header 2.0 pitch to support RS232 USB 3.0/ 2.0: 8 ports Ordering Information – 4x USB 3.0/ USB2.0 ports by stack Type A on edge – 3x USB 2.0 by 4pins JST 2.0mm header connector ICEK8060-T6 (P/N: MISC by Project Registered) – 1x internal USB 2.0 to mini-PCIe slot for external wi-fi module COM Express Type 6 Starter Kit ready for NEXOM COM Express Type SATA 2.0: 4 ports 6 Basic modules assembly SO-DIMM system memory with passive/ – 2x SATA 3.0/ SATA 2.0 ports active fan-sink onto Type 6 carrier ICEB8060 with bootable mini-SATA/ – 1x mini-SATA by mini-PCIe slot for half-/ full size mSATA-SSD CFast-SSD, pre-load Win 7 trial version OS with 10.4” LCD/ LVDS – 1x CFast slot for CFast-SSD/ SATA 2.0 display and build-in Flex-ATX PSU AC 110/220V Input PS/2: 2x 4pins header for Keyboard/ Mouse NEXCOM Computer-On-Modules Support List: GPIO ports: 2x + 8x pins header GPIO from COMe (default 5V TTL/ option 3.3V) Models ICES667 ICES668 Network Processors 3rd. Generation Core™ i7/ i5/ i3 3nd. Generation Core™ i7/ i5/ i3 SKUs rPGA 988 FCBGA 1023 ETH0: LAN chip: from COMe CPU module ETH1: 2nd. RJ45/ GbE port by Intel 82574L Chipset QM77/ HM76 QM77 Support total 2x RJ45/ GbE ports on the edge I/O Max. Memory 16GB 16GB Audio SO-DIMM 2 2 HD Audio AL886 with 5.1 channels Memory Type non-ECC ECC-DDR3 Support external S/PDIF interface Support internal pin-header for L/R speaker-out 2W/ 4 Ohm Heat-spreader Yes Yes EEPROM Heat-Sink Yes Yes 1x 2K EEPROM to record PCI Express Lane configuration Cooling Fan Yes Yes ATMEL AT24C32 (or C02) and address 0x57 or (0xAE) Watchdog Timer Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% temperature 25°C) COM Express We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 11/12/2012

Frequently asked questions

IPC Station' parent company, GID Industrial, specializes in procuring industrial parts. We have years of experience finding rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. It is possible for some parts to be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have our own accounts, but we can also use yours if you would prefer. However, we can use other carriers if it will be more convenient for you.

IPC Station will definitely serve you. In fact, much of our business is international, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by IPC Station. We can also accept wire transfers and PayPal, or a check if you're in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products