NEXCOM ICEK 8050C-T2
Specifications
Board Size
Rugged Plastic (HDPE) Suitcase dimension: 47x 42x 12 cm3
Chipset
Dependent on COM Express module
Battery
On-chip RTC with battery BR2032
Power Requirement
Build-in AC 110/ 220V Input for Flex-ATX PSU in this Starter-Kit
Expansion Interface
1x PCIe x16 slot, support PEG interfaces
1x PCIe x4 slot, optional 4x PCIe x1 signals
1x PCIe x1 slot and 1x PCI (v2.3) slot
1x Mini-PCIe slot for Wi-Fi with SIM tray
I/O Ports
1x edge DB9 connector to support RS232/ 422/ 485 (+5/ +12V by Ring)
1x internal box-header 2.0 pitch to support RS232
4x USB 2.0 ports by stack Type A on edge
3x USB 2.0 by 4-pins JST 2.0mm JST connector
1x internal USB 2.0 to Mini-PCIe slot for external wi-fi module
2x SATA 2.0 ports
1x Mini-SATA by Mini-PCIe slot for half-/ full size mSATA-SSD
1x CFast slot for CFast-SSD/ SATA 2.0
CF: 1x CF/ shared IDE slot onboard (default master-mode)
IDE: 1x 44pins box-header for legacy IDE-HDD
PS/2: 2x PS/2 connectors on edge for Keyboard/ Mouse
Printer Port: 1x DB25 on edge for legacy printer interface
GPIO ports: 2x + 8x pins
Features
- COM Express Type 2
- COM.0
- Rev2.0 Evaluation Starter Kit
- COM Express Compact or Basic Modules with passive or active fan-sink
- Bootable Mini-SATA/ CFast-SSD with 10.4" LCD/ 18-bit LVDS Display
- PCIe x16
- PCIe x4
- PCIe x1
- PCI x1 (v2.3) and Mini-PCIe for Wi-Fi
- PS2/ KB/ Mouse
- LPT/ RS232/422/485
- VGA/ GbE/ 4x USB/5.1 Audio S/ PDIF
- Integrated Flex-ATX PSU for AC 110/ 220V Input
Datasheet
Extracted Text
ICEK 8050C-T2 COM Express Type 2 Starter Kit Integrated COM Express Compact or Basic Module Bootable Mini-SATA/ CFast-SSD on ICEB8050C with 10.4” LCD and Flex-ATX 110/220V AC input Main Features PCIe x16, PCIe x4, PCIe x1, PCI x1 (v2.3) and Mini-PCIe for Wi-Fi COM Express Type 2, COM.0, Rev2.0 Evaluation Starter Kit PS2/ KB/ Mouse, LPT/ RS232/422/485, VGA/ GbE/ 4x USB/ COM Express Compact or Basic Modules with passive or active 5.1 Audio S/ PDIF fan-sink Integrated Flex-ATX PSU for AC 110/ 220V Input Bootable Mini-SATA/ CFast-SSD with 10.4” LCD/ 18-bit LVDS Display Product Overview NEXCOM ICEK 8050C-T2 as proof-of-concept as pre- configured system of COM Express starter kit join- design- win assistance package based on COM Express type 2, pin-out defined by PICMG, COM.0 Rev. 2.0 specification. NEXCOM configure and assembly to order service with COM Express Type 2, pin-outs Compact Modules (95x 95mm) ICES 253 and ICES 254 or Basic Module (125x 95mm) like ICES 267 or ICES 267S or ICES 268 with active ® heat-sink for higher computing embedded processors up to i7-2715QE or i7-3610QE of Intel 2nd or 3rd Generation Core™ i7/ i5/ i3 and Celeron B810E/ 827E/ 847E Mobile processors to adapt wide range of Industrial and embedded applications. ICEK 8050C-T2 features bootable CFast/ SSD from external access or Mini-SATA/ SSD via Mini-PCIe slot (half-/ full-size slot) from internal build-in onto ICEB 8050C ICEK 8050C-T2 also support legacy SATA and CF/ shared IDE-HDD bootable interfaces. ICEK 8050C-T2 support added-on card slots of 1x PCIe x16, 1x PCIe x4, 1x PCIe x1 and 1x PCI (v2.3) slot for you may add-in I/O cards as evaluation during project development. Faster system Time-to-market: ICEK 8050C-T2 as Type 2 starter-kit as pre-configured system ready to help your system design customer to reduce total development cycle time from our proof-of-concept and design-assistance support for your target OS and applications. ® Various CPU SKUs support from Atom™ to Core™ i7/ i5/ i3, Celeron M: It is ready and easy to adapt with our various CPU/ SKU from Intel Atom™ ® to 2nd or 3rd generation Intel Core™ i7/ i5/ i3, Celeron M-based COM Express compact/ basic module from NEXCOM ICES 253/ ICES 254 compact size (95 x 95mm) to Basic-size (125 x 95mm) like ICES 267/ ICES 267S or ICE S268 as support list. Longevity for your multi-generation durable equipment: Once you pre-tested your OS and Application onto our ICEK 8050C-T2 starter kit, You may easy to design your own customized I/O carrier solution board which you may adapt multiple COM Express modules for your target application. Specifications Graphic Interfaces Form factor 3 CRT: support analog VGA with DB15 connector on the I/O edge Rugged Plastic (HDPE) Suitcase dimension: 47x 42x 12 cm LVDS: dual channels 18/24-bit LVDS connector (dual DF-13-20P) Integrated ICEB 8050C Type 2, Carrier CRB for Compact or Basic Modules PCIex16: optional EBK-A2HDMI (ICES254 only) riser card for HDMI or Display DP 10.4” AUO, G104SN03 V5 Super I/O Expansion Winbond W83627DHG-PT 1x PCIe x16 slot, support PEG interfaces 1x PCIe x4 slot, optional 4x PCIe x1 signals 1x PCIe x1 slot and 1x PCI (v2.3) slot 1x Mini-PCIe slot for Wi-Fi with SIM tray COM Express COM Express connector C and D COM Express connector A and B www.nexcom.com Block Diagram SATA *2 SATA x2 BUS R/G/B VGA Connector Connector PCI BUS 33MHz/32bit IDSEL=AD20 PCI SLOT IRQ=A B C D mSATA SATA x1 BUS Connector LVDS A LVDS Channel A (18/24 bit) CFAST SATA x1 BUS Connector Connector SPEAKER PIN USB 2.0 *7 USB BUS LVDS Channel B LVDS B (18/24 bit) HEARD Connector PATA 100/66/33 IDE 44PIN Connector Box header Slave PCI-E x4 PCI-E x4 BUS HD Audio interface Audio Codec SLOT (ALC886) AMP CF Socket Master PCI-E x1 PCI-E x1 BUS SLOT PCI-E x1 BUS Audio Connector MiniPCIE Line IN / Line OUT / MIC IN SLOT USB x1 CEN OUT / SIDE OUT / SPDIF Line OUT I2C BUS EEPROM KB/MS x16 PEG BUS Connector PCI-E x16 SLOT COM 1 GPIO BUS GPI *4 232/422/485 TTL LEVLE GPO *4 Connector SUPER I/O LPC BUS COM 2 (W83627DHG-PT) TYPE 2 Giga LAN TYPE 2 RJ45 232 Page 3 Connector Connector LPT Connector I/O Interface Watchdog Timer Serial COM: 2 ports Watchdog timeout can be programmable by Software from 1 second – 1x edge DB9 connector to support RS232/ 422/ 485 (+5/ +12V by to 255 seconds and from 1 minute to 255 minutes Ring) (Tolerance 15% temperature 25°C) – 1x internal box-header 2.0 pitch to support RS232 On-board RTC USB 2.0: 8 ports On-chip RTC with battery BR2032 – 4x USB 2.0 ports by stack Type A on edge – 3x USB 2.0 by 4-pins JST 2.0mm JST connector Power Input – 1x internal USB 2.0 to Mini-PCIe slot for external wi-fi module Build-in AC 110/ 220V Input for Flex-ATX PSU in this Starter-Kit SATA 2.0: 4 ports – 2x SATA 2.0 ports Ordering Information – 1x Mini-SATA by Mini-PCIe slot for half-/ full size mSATA-SSD ICEK 8050C-T2 (P/N: MISC by Project Registered) – 1x CFast slot for CFast-SSD/ SATA 2.0 COM Express Type 2 Starter Kit ready for NEXOM COM Express CF: 1x CF/ shared IDE slot onboard (default master-mode) compact/ basic modules assembly SO-DIMM system memory with IDE: 1x 44pins box-header for legacy IDE-HDD passive/ active fan-sink onto Type 2 carrier ICEB8050C with bootable PS/2: 2x PS/2 connectors on edge for Keyboard/ Mouse Mini-SATA/ CFast-SSD pre-load Win 7 trial version OS with 10.4” LCD/ Printer Port: 1x DB25 on edge for legacy printer interface LVDS display and build-in Flex-ATX PSU AC 110/220V Input GPIO ports: 2x + 8x pins header GPIO from COMe (default 5V TTL/ option 3.3V) NEXCOM Computer-On-Modules Support List: Network Models ICES 253 ICES 254 ICES 267 ICES 267S ICES 268 LAN chip: from COMe CPU module 2nd Gen. 2nd Gen. 3rd Gen. Atom™ Support 1x RJ45/ GbE port on the edge I/O Processors Atom™ Core™ Core™ Core™ D2550/ SKUs D525 i7/i5/i3 i7/i5/i3 i7/i5/i3 N2800 Audio rPGA 988 FCBGA 1023 rPGA 988 HD Audio AL886 with 5.1 channels Chipset ICEH8M ICH10R QM67 QM67/ HM65 QM77/ HM76 Support external S/PDIF interface Max. Support internal pin-header for L/R speaker-out 2W/ 4 Ohm 2GB 4GB 8GB 8GB 16GB Memory EEPROM SO-DIMM 1 1 1 1 2 1x 2K EEPROM to record PCI Express Lane configuration Heat- ATMEL AT24C32 (or C02) and address 0x57 or (0xAE) Yes Yes Yes Yes Yes spreader Heat-Sink Yes Yes Yes Yes Yes Cooling Fan none none Yes Yes Yes COM Express We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 02/08/2013
Frequently asked questions
Why choose IPC Station?

What is IPC Station' warranty policy for the ICEK 8050C-T2?

What carriers does IPC Station use to ship parts?

Does IPC Station sell to international (non-USA) customers?

What methods of payment does IPC Station accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods