SPD24601 - CARLO GAVAZZI

Description

Power Supply, Single Phase, 24VDC, 60 Watt. 2.5 Amp.
Looking for a power supply for applications where you require a lower profile (depth)? Our Carlo Gavazzi SPD series is the perfect choice. All models have a front potentiometer to easily adjust the output voltage. This useful feature can provide a voltage surplus when line voltage losses cause low voltages to the load. The series is available up to 100 Watts and are a class 2 supply (91 W). Our Carlo Gavazzi power supplies will accept a 120/220 V input voltage and provide a DC voltage output. We offer outputs in 5 VDC, 12 VDC, 15 VDC, 24 VDC, and 48 VDC. A built-in filter is available on some units. For higher currents, our 120 W, 240 W, and 480 W versions can be used in parallel mode. Additionally, some models are available with detachable wiring terminals. Carlo Gavazzi also offers 3-phase power supplies available in these output sizes: 120W, 240W, 480W and 960W. They can be powered by either three phases, or two-phases at a slight derating, and are available with an adjustable 24VDC output (some models are also offered in 12 or 48VDC). All SPD Power Supplies are approved according to UL, cUL, TUV and CE safety standards: UL class 2 recognized and Class B for the emissions according to European standards. They are also RoHS compliant.

Part Number

SPD24601

Price

Request Quote

Manufacturer

CARLO GAVAZZI

Lead Time

Request Quote

Category

Power Supplies

Specifications

Part Number

SPD24601

Product Series

SPD

Weight - lbs.

1.1580

Watts

60 Watt

Voltage

24VDC

Phase

Single Phase

Ratings

cULus (CSA/UL), UL508

Amp Rating

Less Than 5 (See Spec Sheet)

Options

DIN Rail Mount, With LED Light

0)Product Series

SPD Series

Base Unit of Measure

Each

Availability

Standard Stock

Current Output Rating

2.5 Amps

Rated Power

60 Watts

AC Input Voltage Range

85 - 264VAC, 90 - 375VDC

Mounting

DIN Rail Mountable

Protection Ratings

IP20
CE, TÜV, CCC approved & cULus listed
UL 508

Working Temperature Range

-40°C to 71°C

Dimensions

Width: 1.59 in (40.5 mm)
Height: 3.60 in (90 mm)
Depth: 4.49 in (114 mm)

Categorization Information

Power Supplies
Power Supply, Single Phase, 24VDC, 60 Watt.-SPD24601

Features

Standard screw terminals or detachable connectors
Spring terminal available for 60 watt models or lower
Removeable connector available for 120 and 240 watt models.
Diagnostic LED indication of power okay and low voltage output
DIN rail mounting
Metal housing
90-264 VAC or 120-370 VDC input voltage
10 to +60 °C operating temperature without derating
Power factor correction and power ready outputs with parallel function on all models excluding the 120W version
PFC function standard Parallel function standard (selectable by front switch)
Short circuit, overload and over voltage protection
Relay output for power Ready signal (voltage free terminals)

Datasheet

CARLO GAVAZZI, INC. SPD48601.pdf

472 KiB

Download

Extracted Text

T t y f p ü e r p e a g p Switching Power Supply Type SPD 60W DIN rail mounting Universal AC input full range Installation on DIN rail 7.5 or 15mm Short circuit protection Overload protection Class 2 output High efficiency LED indicator for DC power ON Power Ok output CE, TUV approved and cULus Listed Product De scrip tion Ordering Key SP D 24 60 1 B The Switching power supplies and compact dimensions and Model SPD series are specially performance are a must. Mounting ( D = Din rail ) designed to be used in all Output voltage automation application where Output power the installation is on a DIN rail Input Type Optional features Input type: 1= single phase Approvals Optional Features Description Code Rheinland Product Safety Spring connectors B Output Performances DC ON green LED at start up Rated output Output Output Voltage Trim Range Typical Model DC LOW red LED after start up Voltage (VDC) Power (W) Current (A) Efficiency Min. VDC Max. VDC Min. VDC Max. VDC SPD05 5 50 10.0 5 5.5 3.5 4.5 79% SPD12 12 60 5.0 12 14 9.0 10.8 86% SPD24 24 60 2.5 24 28 18 21.6 89% SPD48 48 60 1.25 48 55 37 43 89% Output Data Line regulation ± 0.5% Rated continuous loading 5V Model 10A @ 5VDC/9.0A @ 5.5VDC Load regulation ± 0.5% 12V Model 5A @ 12VDC/4.25A @ 14VDC Minimum load (A) 0 24V Model 2.5A @ 24VDC/2.1A @ 28VDC Turn on time (full resistive load) 1000ms max 48V Model 1.25A @ 48VDC/1.08A @ 55VDC Transient recovery time 2ms Reverse voltage 5V Model 7.5VDC Ripple and noise 50mVpp 12V Model 18VDC Output voltage accuracy ± 1% 24V Model 35VDC Temperature coefficient ± 0.03%/°C 48V Model 63VDC Hold up time Vi= 115VAC 20ms Capacitor load 7000µF Vi= 230VAC 30ms Voltage rise time at 150ms max Voltage fall time (I nom) 150ms max 0 full resistive load 1 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 18/04/12 t p r a r u o a v B e d Switching Power Supply Type SPD 60W DIN rail mounting Input Data Rated input voltage 100 - 240VAC Power dissipation (Vi : 230VAC, Io nom) 5V Model 12.5W Voltage range 12V Model 9.0W AC 85 - 264VAC 24V Model 8.8W DC 90 - 375VDC 48V Model 7.8W Rated input current Frequency range 47- 63Hz (Vi : 115VAC, Io nom) Typ. 1060mA Max. 1500mA Leakage current Input-Output 0.25mA Inrush current Input-FG 3.5mA Vi= 115VAC 20A Vi= 230VAC 40A Controls and Protections Overload 110 – 150% Over voltage protection VDC 1) Min. Max. Input fuse T2A/250VAC internal 5V Model 6.0 6.8 Output short circuit Fold forward 12V Model 15 16.5 Power ready output (Rdy) 24V Model 30 33 (only SPD 24) On threshold Vout > 19,2V ± 2% 48V Model 60 66 Off threshold Vout < 19,1V ± 2% Internal surge voltage protection Varistor (IEC 61000-4-5) 1) Fuse not replaceable by user General Data (@ nominal line, full load, 25°C ) Ambient temperature -40°C to 71°C MTBF (Bellcore issue 6 @ 40°C, GB) 5V Model 498000 Hours Derating (>61°C to +71°C) 2.5%/°C 12V Model 504000 Hours Ambient humidity 20 ~ 95%RH 24V Model 520000 Hours Storage -40°C to +85°C 48V Model 531000 Hours Protection degree IP20 Case material Plastic: PC, UL94-V0 Cooling Free air convection Pollution degree 2 Insulation voltage Altitude 2000m Input-Output 3.000VAC/4242VDC min Dimensions LxWxD mm(inch) 90(3.60)x40.5(1.59)x114(4.49) Input-FG 1.500VAC/2121VDC min Weight 340g Insulation resistance I/O 100MΩ min (@ 500VDC) Norms and Standards Vibration resistance meet IEC 60068-2-6 CE EN 61000-6-3, EN 55022 (Mounting by rail: 10-500Hz, Class B, EN 61000-3-2, 2G, along X, Y, Z each Axis, EN 61000-3-3, 60 min for each Axis) EN 61000-6-2, EN 55024, Shock resistance meet IEC 60068-2-27 EN 61000-4-2 Level 4, (15G, 11ms, 3 Axis, 6 faces, EN 61000-4-3 Level 3, 3 times for each face) EN 61000-4-4 Level 4, UL / cUL UL508 listed, UL60950-1, EN 61000-4-5 L-Level 3, UL1310 Class 2 Power L/N-FG Level 4, (only 5V, 12V w/o Class 2) EN 61000-4-6 Level 3, Recognized, ISA 12.12.01 EN 61000-4-8 Level 4, (Class 1, Division 2, EN 61000-4-11, Groups A, B, C and D) ENV 50204 Level 2, TUV EN 60950-1, CB scheme EN 61204-3 EN 61558-1, EN 61558-2-17 (meet EN 60204) CCC GB4943, GB9254, GB17625.1 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 18/04/12 2 Switching Power Supply Type SPD 60W DIN rail mounting Block Diagrams L Fuse Vo + Inrush Current Line Switching Limiter and Rectifier Filter Device Rectifier N Vo - PWM Controller Opto - Reference & Isolation Error Amp. Vout ADj. Y Opto - Over Voltage Isolation Detection Y Y DC ON Output Level (Green LED) Detection RDY (Open Collector) Pin Assignement and Front Controls Pin No. Designation Description 1 RDY DC OK, output for relay (only on SPD 24) 2 + Positive output terminal 3 + Positive output terminal 4 - Negative output terminal 5 - Negative output terminal 6 GND Ground terminal to minimise High frequency emissions 7 L Phase input ( no polarity with DC input ) Neutral input ( no polarity with DC input ) 8 N Trimmer for fine output voltage adjustment Pot1 Vout ADJ. L1 DC ON DC output ready LED Output Rdy Wiring Diagram Derating Diagram RL > 700ohm Rdy 100 75 -Vout a ) Relay 2.2K Rdy 0.5W 5.1K 0 0.3W -40 61 71 -Vout Temperature (%) b ) 5V signal 3 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 18/04/12 Power out (%) Switching Power Supply Type SPD 60W DIN rail mounting Typ. Current Limited Curve SPD 60W - 24V Mechanical Drawings mm (inches) Typ. Efficiency Curve 95 90 85 80 75 70 65 60 55 230 VAC 115VAC 50 45 40 10 25 50 75 100 Power out (%) Installation Ventilation and cooling Normal convection All sides 25mm free space for cooling is recommended Connector size range 2 Spring terminal AWG24-14 (0.2~2mm ) flexible/solid cable, 10mm stripping at cable and recommends use copper conductors only, 60/75°C 2 Screw terminal AWG26-12 (0.2~2.5mm ) flexible/solid cable, connector can withstand torque at max 0,56Nm (5 lbs-in). 4~5 mm stripping at cable and recommends use copper conductors only, 60/75°C Max. torque for terminal Input terminals 0.56Nm (5.0lb-in) Output terminals 0.56Nm (5.0lb-in) General tolerances mm(in.) 0.00 (0.00) ÷ 30.00 (1.18) ±0.30 (0.01) 30.00 (1.18) ÷ 120.00 (4.72) ±0.50 (0.02) Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 18/04/12 4 EFFICIENCY (%)

Frequently asked questions

IPC Station' parent company, GID Industrial, specializes in procuring industrial parts. We have years of experience finding rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. It is possible for some parts to be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have our own accounts, but we can also use yours if you would prefer. However, we can use other carriers if it will be more convenient for you.

IPC Station will definitely serve you. In fact, much of our business is international, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by IPC Station. We can also accept wire transfers and PayPal, or a check if you're in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products