rBOX120-2COM Robust Din-rail Fanless Embedded System Features with Intel® Atom™ Processor Z510PT/ Z520PT up to 1.33 GHz, Intel® US15WPT , Fanless and cableless design ● 2 Isolated COM, SATA SSD, LANs and RTC Intel® Atom™ processor Z510PT 1.1 GHz or ● Z520PT 1.33 GHz Wide temperature operation of -40°C ~ +70°C ● 2 isolated COM ports ● 3 isolated 10/100/1000Mbps Ethernet ports ● 1 isolated DIO (8-In/ 8-Out) ● 1 x CompactFlash™ 2 watchdog timer ● 1 x SIM slot RTC Battery function ● 1 x SATA SSD (or HDD) LED indicators ● 2 wireless (3G/GPRS & Wi-Fi) ● SNMP V1/V2c ● Intel® Atom™ Supports 1 x 2.5" SATA SSD (or HDD) ● processor Z510 PT/ Supports 1 CompactFlash™, 1 SD card (optional) ● Z520PT 2 power paths with terminal block and 12-48VDC ● 2 Wireless 3 10/100/1000Mbps (3G/GPRS & Wi-Fi) Supports AXView remote monitoring software package ● Ethernet SIM card socket CompactFlash™ slot Front view Isolation Ext. Temp IP30 UL508 Fanless Din-rail kit Low Power Rear view Easy-to-access interface Introduction System I/O Outlet LAN 3 x 10/100/1000Mbps Ethernet The rBOX120-2COM din-rail fanless embedded field controller supports extra low power Magnetic isolation protection 1.5 KV Intel® Atom™ processors Z510PT and Z520PT with extended temperature range of -40°C to 70°C for use in extreme operating environments. USB 2 x USB 2.0 USB power distribution control by To prevent ESD and over-voltage, this super compact-size rBOX120-2COM is equipped software with 2 isolated RS-232/422/485, 3 isolated 10/100/1000Mbps Ethernet for offering DIO 1 x DIO (8-In/8-Out) magnetic isolation protection. Two power paths input minimize the risk of data loss DI : in the event of a single power failure. In addition, the RTC battery (battery onboard & Input channels : 8 source type gold-capacity onboard) reduces maintenance efforts and is ideally suited to vibration Input voltage : 0 to 24VDC environment. Powered by IP30 housing, wide operating temperature range and Safety/ Digital input level for dry contacts : EMI/EMS compliance, the rBOX120-2COM is ideal for intelligent computing and -Logic level 0 : close to GND communication solutions in critical environments such as power utility, transportation -Logic level 1 : open and more. Digital input levels for wet contacts : -Logic level 0 : +10V to +24V (DI to XIN_ The ready-to-run rBOX120-2COM equipped with AXView remote monitoring software COM-) is a total solution for power plant automation, facility monitoring systems, intelligent -Logic level 1 : +3V max. transportation systems, and more. DO : Output channels : 8 sink type Output current : Max. 200mA per channel Specifications On-state voltage : 24VDC nominal, open collector to 30V Standard Color Sliver-Black Optical isolation protection 2KV Construction Extruded aluminum and heary-duty steel, IP30 RTC Battery onboard & CPU Intel® Atom™ processor Z510PT 1.1 GHz or Z520PT 1.33 GHz Gold capacity onboard (1st backup System Memory 1 x 200-pin DDR2 SO-DIMM max. up to 2 GB battery when power shut-down) System I/O Outlet Serial Port 2 x Isolated RS-232/422/485 (COM 1~2) VGA 1 x DB15 connector Interface select by software or BIOS Power Input 2 x DC power input with terminal block Supports Auto Flow Control in RS-485 Alarm Contact One relay output with current 0.5A mode @30VDC ESD protection 15 KV Wireless 2 x Mini Card Magnetic isolation protection 2KV COM 1 & COM 2 speed up to 115.2kbps - 3G/GPRS and Wi-Fi - Supports USB interface on 3G/GPRS and supports PCIe interface on Wi-Fi 1 x SIM socket (Easy-to-access) 337 * All specifications and photos are subject to change without notice. Specifications Watchdog Timer 2 WDT EN61000-4-4 (burst standards) Overview * Signal ports: +/- 2 KV; criteria B WDT 1: one step is 1 sec, 255 levels WDT 2: one step is 250ms, 255 levels * DC power ports: +/- 2 KV; criteria B EN61000-4-5 (surge standards) LEDs System Power, Alarm, Ready/Active, COM * Signal ports: +/- 1 KV; line-to-line; criteria B (TXD, RXD), wireless (3G/GPRS/Wi-Fi) * DC power ports: +/- 0.5 KV; line-to-earth; criteria B Alarm DC PWR1 or PWR2 is lost (default) EN61000-4-6 (induced RFI standards) Embedded User define event Systems * Signal ports: 10 Vrms @ 0.15 ~ 80 MHz; 80% AM Storage Supports 1 x 2.5" SATA SSD or HDD criteria A Supports 1 x CompactFlash™ (Easy-to-access) * DC power ports: 10 Vrms @ 0.15 ~ 80 MHz; 80% AM Supports 1 x SD card up to 32 GB (optional) criteria A Installation Din-rail, wall mount EN61000-4-8 (magnetic field standards) Power Supply 2 power paths * 30 A/m @ 50, 60 Hz; criteria A Embedded Power Input Range 12-48VDC Environmental Test IEC60068-2-6 Fc (vibration resistance) Systems for 5 g @ 10 ~ 150 Hz, amplitude 0.35 mm (operation/storage/ Power Input Rating 12-48VDC, 1.51-0.41A Transportation transport) Power Protection DC Version: IEC60068-2-27 Ea (shock) 25 g @ 11 ms (half-sine shock OVP (over voltage protection) pulse; operation); 50 g @ 11 ms (half-sine shock pulse; UVP (under voltage protection) Reverse protection 3 3 storage/transport) Operating Temperature -40°C ~ +70°C (-40°F ~ +158°F) Embedded IEC60068-2-32 Ed (free fall) 1 M (3.281ft) Storage Temperature -45°C ~ +85°C (-49°F ~ +185°F) Field Controllers Humidity 10% ~ 95% Weight (net/gross) 1.5 kg (3.3 lb)/1.88 kg (1.14 lb) Ordering Information Dimensions 100.6 mm (3.96") (W) x 110 mm (4.33") (D) x 135 mm (5.31") (H) EOS Support XPE, WinCE, Linux support package, Windows® 7 Embedded Standard ISO Manufactured in an ISO9001 facility rBOX120-2COM- Robust din-rail fanless embedded system with Intel® Industrial TM Firewall FL1.1G-DC Atom processor Z510PT 1.1 GHz and 2 isolated COM ports Safety Heavy Industrial CE, including: (-40°C ~ +70°C) EN60950-1, IEC60950-1 rBOX120-2COM- Robust din-rail fanless embedded system with Intel® Safety UL60950-1, UL508 TM FL1.33G-DC Atom processor Z520PT 1.33 GHz and 2 isolated COM Compliance ports (-40°C ~ +70°C) EMI FCC Part 18 Digital Signage Heavy Industrial CE, including: Optional Solutions EN61000-6-4, EN61000-3-2, EN61000-3-3 DDR2 SODIMM 1 GB ~ 2 GB (with W.T. memory) EMS Compliance EN50121-4 (Railway application) DDR2 SODIMM 1 GB ~ 2 GB (with 0°C ~ +85°C memory; operating EMS Heavy Industrial CE, including: temperature: 0°C ~ +70°C) EN61000-6-2 CompactFlash™ 2 GB or above (with W.T. CF) EN61000-4-2 (ESD standards) * Contact: +/- 6 KV; criteria B 2.5" SATA SSD or HDD Embedded MicroBoxes * Air: +/- 8 KV; criteria B Wall mount kit EN61000-4-3 (radiated RFI standards) Wireless (3G/GPRS or Wi-Fi) module for rBOX series * 10V/m, 80 to 1000 MHz; 80% AM criteria A *Specifications and certifications are based on options and may vary. Dimensions Industrial Barebone Systems Industrial Chassis Backplanes Power Supplies Peripherals & Accessories axiomtek.com 338 * All specifications and photos are subject to change without notice. © 2016 Axiomtek Co., Ltd. All rights reserved.