AXIOMTEK ICON-101CS

Why buy from GID?

Quality

We are industry veterans who take pride in our work

Protection

Avoid the dangers of risky trading in the gray market

Access

Our network of suppliers is ready and at your disposal

Savings

Maintain legacy systems to prevent costly downtime

Speed

Time is of the essence, and we are respectful of yours

Details

Part Number ICON-101CS
Manufacturer AXIOMTEK
Category Peripherals »  Shelfmount Computers
Price Request Quote
Lead Time Request Quote

Description

1-port CAN to RS-232/422/485 Industrial Converter (-40°C ~ +70°C)
The CAN (Controller Area Network) is a serial bus system and is usually used in structuring intelligent industrial device networks and building smart automatic control systems. The iCON-101CS is an industrial converter ideally suitable for CAN network using traditional RS-232/422/485 devices. It precisely converts messages between CAN and RS-232/422/485 networks, allowing any PC or devices with RS-232/422/485 interface to communicate with CAN devices easily. This converter supports CAN monitor tool and displays the CAN message received in Decimal or HEX mode. The iCON-101CS shows the time stamp of each receiving message. The GUI management program and programming guide both are ready for use. 1-port CAN to RS-232/422/485 industrial converter

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Our Process

Our Process: Preparation
Preparation

Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.

Our Process: Receiving
Receiving

Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.

Our Process: Initial Testing
Initial Testing

Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.

Our Process: Refurbishment
Refurbishment

Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.

Our Process: Repair
Repair

Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.

Our Process: Final Testing
Final Testing

Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.

Our Process: Shipping
Shipping

After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.

Who We Are

IPC Station is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.

Do you need an ICON-101CS? We can help you find it at a competitive price!

Specifications

Categorization Information Systems & Platforms
Peripheral
CAN Converter

Features

  • Software configurable CAN and RS-232/422/485 communication parameters
  • Fully compliance with CAN 2.0A and CAN 2.0B
  • D-sub DB9 CAN port supports 3KV isolation
  • Easily setup to CAN and RS-485 terminator by software configurable
  • Powered by 10~30V wide-range DC
  • Transmission speed up to 1Mbps for CAN and RS-232
  • Clear LED indicators to converter status in progressing
  • Provides DIN-rail mounting
  • 40°C ~ +70°C wide temperature operating suitable for industrial automation and power automation field applications

Datasheet

Download "icon-101cs.pdf" (319 KiB)

Extracted Text

iCON-101CS 1-port CAN to RS-232/422/485 Industrial Features Converter (-40°C ~ +70°C) Software configurable CAN and RS-232/422/485 ● communication parameters Fully compliance with CAN 2.0A and CAN 2.0B ● D-sub DB9 CAN port supports 3KV isolation ● Easily setup to CAN and RS-485 terminator by software ● configurable Powered by 10~30V wide-range DC ● Transmission speed up to 1Mbps for CAN and RS-232 ● Clear LED indicators to converter status in progressing ● Provides DIN-rail mounting ● -40°C ~ +70°C wide temperature operating suitable for ● industrial automation and power automation field applications Ext. Temp Introduction Serial Interface The CAN (Controller Area Network) is a serial bus system and is usually used in Connector 9-pin D-Sub structuring intelligent industrial device networks and building smart automatic control systems. The iCON-101CS is an industrial converter ideally suitable for CAN network Baud Rate up to 921600bps using traditional RS-232/422/485 devices. It precisely converts messages between CAN Data Rate 8 and RS-232/422/485 networks, allowing any PC or devices with RS-232/422/485 interface Stop Rate 1 to communicate with CAN devices easily. This converter supports CAN monitor tool and Parity None displays the CAN message received in Decimal or HEX mode. The iCON-101CS shows the Receiver Buffer 1000 data frames time stamp of each receiving message. The GUI management program and programming Power guide both are ready for use. Power Input Input voltage: 10 to 30VDC (Terminal Block) Specifications Power Consumption 0.9W max. 0.08A @ 10VDC, 0.03A @ 30VDC LED CAN Interface Power/firmware updating, CAN TX/RCV, CAN status for normal and error, UART TX/RCV, Connector 9-pin male D-Sub terminator status Isolation 3 KVrms DC-DC converter & photocoupler Mechanical Receive Buffer 1000 data frames Casing Aluminum case NVRAM 64Kbyte for users define Dimension 70 mm (W) x 110 mm (D) x 30 mm (H) Max Data Flow 10000 fps (CAN bus) (2.75" (W) x 4.33" (D) x 1.18" (H)) Support Protocol CAN 2.0A/2.0B Weight 0.25 kg (0.55 lb) Terminator Resistor Software configurable Installation DIN-rail and panel mount Baud Rate 5k,10k, 20k, 40k, 50k, 80k, 100k,125k, 200k, 250k, 400k, Environment 500k, 600k, 800k ,1Mbps and user defined Operating Temperature -40°C to +70°C (-40°F to +167°F) Storage Temperature -40°C to +85°C (-40°F to 185°F) Humidity 5% ~ 95% (non-condensing) Emission Compliance CE class A, FCC class A 475 * All specifications and photos are subject to change without notice. Ordering Information iCON-101CS 1-port CAN to RS-232/422/485 industrial converter Overview Embedded Systems CAN Device Embedded Systems for Transportation RS-232/422/485 CAN Device Embedded iCON-101CS Field Controllers CAN Device Industrial Firewall Dimensions Digital Signage Solutions Embedded MicroBoxes Industrial Barebone Systems Industrial Chassis Backplanes Power Supplies 11 Peripherals & Accessories axiomtek.com 476 * All specifications and photos are subject to change without notice. © 2016 Axiomtek Co., Ltd. All rights reserved. CAN Network

Related Products

AXIOMTEK
1-port CAN to USB Industrial Converter (-40°C ~ +70°C) The CAN (Controller...

Disclaimer

Any product names, logos, brands, and other trademarks or media featured or referred to on IPC Station are the property of their respective owners.

GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.

All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.

IPC Station is a GID Industrial website.
GID Industrial Logo
Copyright © 2024 GID Holdings LLC, All Rights Reserved.
Page generated in 0.042 seconds.