Power over Link™ Ethernet Extenders ED3638 Hardened 10/100BASE-TX PoL™/PoE Ethernet Extender over Coaxial Cable UL 60950 ™ Overview The ED3638 Hardened Ethernet Extender utilizes EtherWAN’s exclusive Power over Link (PoL) technology to deliver both PoE power and Ethernet communications over a single legacy coaxial cable. The ED3638 PoL solution is comprised of one transmitter and one receiver working together to provide reliable communications and power to remote PoE Powered Devices such as IP cameras, wireless access points, emergency intercoms, or VoIP phones. With just the transmitter connected to power, the ED3638 provides a maximum of 30 watts of power and a bandwidth of 100Mbps to the ED3638 receiver, at distances up to 400 meters. Under this setup, transmission over longer distances can be achieved with lower data and power throughput — up to 1800 meters at a data rate of 15Mbps and 4 watts of power. However, for applications that require even longer distances, the ED3638 can be connected to power at both the transmitter and the receiver unit, increasing the transmission distance to a remarkable 2400 meters, with a data rate of 4Mbps and a full 30 watts. The current data transmission rate and power sourcing equipment output is displayed by LED indicators. The ED3238 is highly resistant to electromagnetic interference, shock, and vibration, ensuring connection reliability even in harsh environments. Spotlight • Power over Link™ up to 1.8 km (5905 ft.) ◦ Over an 1800 meters long coaxial cable, a guaranteed 4 watts power with 15Mbps bandwidth is delivered to the receiving side • Ethernet extension solution with high transmission data rate up to 100Mbps ◦ Up to 400 meters transmission distance with 100Mbps data rate • Transmission rate and PSE output power indicator LEDs ◦ Six transmission rate LEDs and three PoE/PSE output power LEDs on the front panel ED3638 1 www.EtherWAN.com rev. A2 Hardware Specifications Technology Standards Speed / Distance / PoE Output Reference • IEEE802.3 10BASE-T • IEEE802.3u 100BASE-TX, PoL™ Enabled • IEEE802.3x, full duplex and flow control Distance Data Rate ED3638R PoE Output • IEEE802.3af/at PoE/PSE 400m 100Mbps 30.0W Protocols 800m 60Mbps 15.4W • Transparent to higher layer protocols 1000m 50Mbps 12.0W Processing Type • IEEE802.3x Full-duplex flow control 1200m 45Mbps 8.0W Power 1600m 20Mbps 6.0W Input 1800m 15Mbps 4.0W • Terminal Block: 46 - 57VDC • DC JACK: 48VDC PoL™ Disabled • 2.5A @ 48VDC (Peak current 3.26A) (Power Supply Applies on ED3638R) Power Consumption Distance Data Rate ED3638R PoE Output • Max. 65W with Power over Link (PoL) function enabled 2000m 9Mbps 30.0W • ED3638T: Max. 5W (without PoL / PoE) • ED3638R: Max. 5W (without PoL / PoE) 2200m 6Mbps 30.0W Max. 35W (with PoE only) Up to 2400m 4Mbps 30.0W Protection • Over current protection Environment • Reverse polarity protection Operating Temperature Mechanical • -40 to 75°C (-40 to 167°F) Tested @ -40 to 85°C (-40 to 185°F) Casing Storage Temperature • Aluminum case • -40 to 85°C (-40 to 185°F) • IP30 Ambient Relative Humidity Dimensions • 5% to 95% (non-condensing) • 50 x 110 x 135mm (W x D x H) (1.97" x 4.33" x 5.31") Regulatory Approvals Weight ISO • 0.8Kg (1.76lbs.) • Manufactured in an ISO 9001 facility Installation Safety • DIN-Rail (Top hat type 35mm), Panel, or Rack mounting UL 60950-1 and IEC 60950-1 Interface EMI Ethernet Port • ED3638T/R: 1x RJ-45 port,10/100BASE-TX Full-duplex FCC Part 15B, Class A • ED3638R: 1x PoE/PSE port EN 61000-6-4 • Auto-Negotiation, Auto-MDI/MDIX EN 55022 • Speed: 10/100Mbps • Distance: 100meters (328ft.) EN 61000-3-2 • Cable: 100BASE-TX: UTP CAT. 5 (4-pair wire) EN 61000-3-3 Ethernet Extender Port EMS • Port: One 75Ω BNC Port (with F-type connector) • Cable: Coaxial Cable (5C2V / RG6) EN 61000-6-2 • Coaxial Cable (5C2V / RG6) • EN 61000-4-2 (ESD Standards) • EN 61000-4-3 (Radiated RFI Standards) DIP Switch • EN 61000-4-4 (Burst Standards) • ED3638T: PoL: ON/OFF, Type: Perf/Std • EN 61000-4-5 (Surge Standards) • ED3638R: Mode: Loc/Rmt, Type: Perf/Std • EN 61000-4-6 (Induced RFI Standards) LED Indicators • EN 61000-4-8 (Magnetic Field Standards) • Per Unit: Power Status (Power) Environmental Test Compliance • Per Port 10/100TX: Link/Activity, Full-duplex • Line Speed: Six indicators for 100/80/60/40/20Mbps and IEC 60068-2-6 Fc (Vibration Resistance) Link below 20Mbps IEC 60068-2-27 Ea (Shock) • PoE: Power over Ethernet function availability IEC 60068-2-32 Ed (Free Fall) ED3638 2 www.EtherWAN.com rev. A2 Dimensions 110mm (4.33”) Top Top (ED3638T) (ED3638R) Front Front Side Back (ED3638T) (ED3638R) Bottom Bottom (ED3638T) (ED3638R) Application Diagram Ethernet Switch PoE Powered Device 48VDC Power Supply POWER & DATA UP TO 1800m Cat.5 Ethernet Long Distance Ethernet without a power cord in the oaxial- ED3638R C ED3638T end device. Cable ED3638 3 www.EtherWAN.com rev. A2 145.5mm 135mm (5.31”) Ordering Information Model Hardened PoL/PoE Ethernet Extender over Coaxial Cable ED3638 (including one ED3638T and one ED3638R) Note: * ED3638T is the power Transmitter of PoL and ED3638R is the power Receiver of PoL * DIN-Rail mounting kit included Optional Power Supplies Power supply suggestion 30-watt PoE application SDR-120-48 / DR-120-48 (120W 48VDC) For one pair SDR-240-48 (240W 48VDC) For three pairs SDR-480-48 (480W 48VDC) For seven pairs ED3638 4 www.EtherWAN.com rev. A2