ED3538 Hardened 10/100BASE-TX PoL/PoE Ethernet Extender over Copper Wires UL 60950 ™ Overview The ED3538 Hardened Ethernet Extender utilizes EtherWAN’s exclusive Power over Link (PoL) technology to deliver both PoE power and Ethernet communications over a single legacy twisted pair cable, such as a telephone line. The ED3538 PoL solution is comprised of one transmitter and one receiver working together to provide reliable communications and power to remote PoE Powered Devices such as IP cameras, wireless access points, emergency intercoms, or VoIP phones. With just the transmitter connected to power, the ED3538 provides a maximum of 30 watts of power and a bandwidth of 100Mbps to the ED3538 receiver, at distances up to 300 meters. Under this setup, transmission over longer distances can be achieved with lower data and power throughput — up to 1200 meters at a data rate of 20Mbps and 5 watts of power. However, for applications that require even longer distances, the ED3538 can be connected to power at both the transmitter and the receiver unit, increasing the transmission distance to a remarkable 2200 meters, with a data rate of 1Mbps and a full 30 watts. The current data transmission rate and power sourcing equipment output is displayed by LED indicators. The ED3538 is highly resistant to electromagnetic interference, shock, and vibration, ensuring connection reliability even in harsh environments. Spotlight • Power over Link™ up to 1.2 km (3936 ft.) ◦ Over an 1200 meters long RJ11 cable, a guaranteed 5 watts power with 20Mbps bandwidth is delivered to the receiving side • Ethernet extension solution with high transmission data rate up to 100Mbps ◦ Up to 300 meters transmission distance with 100Mbps data rate • Transmission rate and PSE output power indicator LEDs ◦ Six transmission rate LEDs and three PoE/PSE output power LEDs on the front panel ED3538 1 www.EtherWAN.com rev. A2 Hardware Specifications Technology Distance / Speed / PoE Output Reference Standards • IEEE802.3 10BASE-T PoL™ Enabled • IEEE802.3u 100BASE-TX, Distance Data Rate ED3538R PoE Output • IEEE802.3x full duplex and flow control 300m 100Mbps 30.0W • IEEE802.3af/at PoE/PSE 400m 90Mbps 15.4W Protocols • Transparent to higher layer protocols 600m 60Mbps 14.0W Processing Type 800m 45Mbps 9.5W • IEEE802.3x Full-duplex flow control 1000m 35Mbps 7.0W • Auto-Negotiation • Auto MDI/MDIX 1200m 20Mbps 5.0W Power Input PoL™ Disabled (Power supply on 3538R) • Terminal Block: 46 - 57VDC Distance Data Rate ED3538R PoE Output • DC JACK: 48VDC 1400m 15Mbps 30.0W • 2.5A @ 48VDC (Peak current 3.26A) Power Consumption 1600m 10Mbps 30.0W • Max. 65W with Power over Link™ (PoL) function enabled 1800m 3Mbps 30.0W • ED3538T: Max. 5W (without PoL / PoE) Up to 2200m 1Mbps 30.0W • ED3538R: Max. 5W (without PoL / PoE) Max. 35W (with PoE only) NOTE: Reference Performance on 24 AWG copper wire (0.5mm diameter, 1-pair wire, Cable impendence: 100ohm) Protection • Overload current protection Environment • Reverse polarity protection Operating Temperature Mechanical • -40 to 75°C (-40 to 167°F) Tested @-40 to 85°C (-40 to 185°F) Casing • Aluminum case Storage Temperature • IP30 • -40 to 85°C (-40 to 185°F) Dimensions Ambient Relative Humidity • 50 x 110 x 135mm (W x D x H) • 5% to 95% (non-condensing) (1.97" x 4.33" x 5.31") Regulatory Approvals Weight • 0.8Kg (1.76lbs.) ISO • Manufactured in an ISO 9001 facility Installation • DIN-Rail (Top hat type 35mm), Panel or Rack mounting Safety Interface UL 60950-1, IEC 60950-1 Ethernet Port EMI • ED3538T/R: 1 x 10/100BASE-TX Full-duplex RJ-45 port FCC Part 15B, Class A • ED3538R: 1 x PoE/PSE port EN 61000-6-4, EN 55022, EN 61000-3-2 and EN 61000-3-3 • Speed: 10/100Mbps • Cable: 100BASE-TX, UTP CAT. 5 (4-pair wire) EMS • Distance: 100 meters (328ft.) EN 61000-6-2 Ethernet Extender Port • EN 61000-4-2 (ESD Standards) • 1 x RJ11 port • EN 61000-4-3 (Radiated RFI Standards) • 1 x 2-pin Terminal Block (Wire range: 12 - 30 AWG) • EN 61000-4-4 (Burst Standards) DIP Switch • EN 61000-4-5 (Surge Standards) • ED3538T: PoL: ON/OFF, Type: Perf/Std • EN 61000-4-6 (Induced RFI Standards) • ED3538R: Mode: Loc/Rmt, Type: Perf/Std • EN 61000-4-8 (Magnetic Field Standards) LED Indicators Environmental Test Compliance • Per Unit: Power IEC 60068-2-6 Fc (Vibration), IEC 60068-2-27 Ea (Shock), • Per 10/100TX Port: Link/Activity, Full-duplex • Line Speed: Six indicators for 100/80/60/40/20Mbps and IEC 60068-2-32 Ed (Free fall w/ package) Link below 20Mbps • PoE: Power over Ethernet function availability ED3538 2 www.EtherWAN.com rev. A2 Dimensions 110mm (4.33”) Top Top (ED3538T) (ED3538R) 50mm (1.97”) Front Front Side Back (ED3538T) (ED3538R) Bottom Bottom (ED3538T) (ED3538R) Application Diagram PC / Ethernet Switch PC / Ethernet Switch PoE Camera 48VDC Power Supply Cat.5 POWER & DATA Ethernet Long Distance Up to 1.2 Km Ethernet without a power cord in the Phone- end device. Cable ED3538T ED3538R ED3538 3 www.EtherWAN.com rev. A2 145.5mm 135mm (5.31”) Ordering Information Model ED3538 Hardened PoL/PoE Ethernet Extender over Copper Wires (including one ED3538T and one ED3538R) Note: * ED3538T is the power transmitter of PoL and ED3538R is the power receiver of PoL * DIN-Rail mounting kit included Optional Power Supplies Power supply suggestion 30 watts PoE application SDR-120-48 / DR-120-48 (120W 48VDC) For 1 pair SDR-240-48 (240W 48VDC) For 3 pairs SDR-480-48 (480W 48VDC) For 7 pairs ED3538 4 www.EtherWAN.com rev. A2