IPC Station

Description

Advantech's Packetarium XLe series meets the higher levels of performance and throughput needed by next generation enterprise and telecom applications, offering new, cost-effective ways to scale-out compute density using Intel® Architecture processors distributed across high-speed switched backplanes.
The system is optimized for maximum CPU and network I/O density, enabling faster packet handling to meet the increased data throughput rates needed in enterprise networking and in telecom middle boxes. It is ideal for Network Intelligence deployments requiring accelerated packet processing performance on 10GbE, 40GbE and 100GbE ports in applications such as high-end network security, policy control and traffic analysis. The first model in the Packetarium XLe for Enterprise series, the PAC-4010 fits in just 4RU and reaches the performance levels typically only found in specialized ATCA or proprietary network processor-based solutions, but at a fraction of the cost.
The platform uses common IP and building blocks to bring greater cost efficiencies and economies of scale which can then be passed on to customers.
The PAC-4010, packs up to 840 Gbps of I/O, up to 2 Tbps of switching capacity and up to 12 Intel® Xeon® Processor E5-2600 v3/v4 CPUs in just 4RU. The integrated switch & system control module is based on the high capacity Broadcom StrataXGS® Trident II/II switch family managed by an Intel® Atom™ Processor C2000 and provides six hot swappable PHY mezzanine module (PMM) slots to accommodate a wide choice of 10 GbE, 40 GbE and 100 GbE ports with optional LAN bypass support.
Many different payloads can be integrated into Advantech Packetarium XLe systems and configured to address a broad range of industry applications.

Part Number

PAC-4010

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

Networking Systems & Platforms » Packetarium Network Platforms

Specifications

Categorization Information

Networks & Communications
Network Platforms, Blades & Adapters
Networking Systems & Platforms
Packetarium Network Platforms
Packetarium XL x86 Blade Servers

Features

Highest CPU and I/O density platform in the Packetarium XL family
Up to 12 CPU blades with single Intel® Xeon® Processor E5-2600 v3/v4
Up to 2Tbps switching capacity with 100Gbps midplane connectivity per blade
Flexible I/O configurations with up to 6 PHY Mezzanine Modules (PMMs) which can host 1x100GbE, 3x40GbE, 2x40GbE, or 8x10GbE ports each
Broadcom FastPath v8.2 and Advantech Load Balancer (L2) supports
Enhanced platform management features for increased RASUM
Hot swappable and redundant AC/DC and DC/DC PSU options
Front-to-rear push-pull cooling mode. Six rear pluggable, hot swappable fan modules with fan speed control
Optional SATA storage devices on the CPU blade and on the system mount
Optional LCD module support

Datasheet

7c32cb68-025e-4d75-98bc-92108156c401.pdf

2083 KiB

Download

Extracted Text

Packetarium XLe Ultra High Performance Blade Server with 100G Switched PAC-4010 Midplane Features Highest CPU and I/O density platform in the Packetarium XL family ® ® Up to 12 CPU blades with single Intel Xeon Processor E5-2600 v3/v4 Up to 2Tbps switching capacity with 100Gbps midplane connectivity per blade Flexible I/O configurations with up to 6 PHY Mezzanine Modules (PMMs) which can host 1x100GbE, 3x40GbE, 2x40GbE, or 8x10GbE ports each Broadcom FastPath v8.2 and Advantech Load Balancer (L2) supports Enhanced platform management features for increased RASUM Hot swappable and redundant AC/DC and DC/DC PSU options Front-to-rear push-pull cooling mode. Six rear pluggable, hot swappable fan modules with fan speed control Optional SATA storage devices on the CPU blade and on the system mount Optional LCD module support RoHS COMPLIANT 2002/95/EC Introduction Advantech’s Packetarium XLe series meets the higher levels of performance and throughput needed by next generation enterprise and telecom applications, offering new, cost-effective ® ways to scale-out compute density using Intel Architecture processors distributed across high-speed switched backplanes. The system is optimized for maximum CPU and network I/O density, enabling faster packet handling to meet the increased data throughput rates needed in enterprise networking and in telecom middle boxes. It is ideal for Network Intelligence deployments requiring accelerated packet processing performance on 10GbE, 40GbE and 100GbE ports in applications such as high-end network security, policy control and traffic analysis. The first model in the Packetarium XLe for Enterprise series, the PAC-4010 fits in just 4RU and reaches the performance levels typically only found in specialized ATCA or proprietary network processor-based solutions, but at a fraction of the cost. The platform uses common IP and building blocks to bring greater cost efficiencies and economies of scale which can then be passed on to customers. ® ® The PAC-4010, packs up to 840 Gbps of I/O, up to 2 Tbps of switching capacity and up to 12 Intel Xeon Processor E5-2600 v3/v4 CPUs in just 4RU. The integrated switch & ® ® system control module is based on the high capacity Broadcom StrataXGS Trident II/II+ switch family managed by an Intel Atom™ Processor C2000 and provides six hot swappable PHY mezzanine module (PMM) slots to accommodate a wide choice of 10 GbE, 40 GbE and 100 GbE ports with optional LAN bypass support. Many different payloads can be integrated into Advantech Packetarium XLe systems and configured to address a broad range of industry applications. For more details on integrating a specific configuration please contact your local sales representative. Specifications NOTE1 ® ® CPU 12 CPU blades, Single Intel Xeon Processor E5-2600 v3/v4 series on each CPU blade Up to 1.68 Tbps data plane switching capacity, Processor System Switch Up to 320Gbps control plane switching capacity, Up to 100Gbps connectivity per blade Flexible I/O with up to 6 PHY Mezzanine Modules (PMMs) which can host 1x100GbE, 3x40GbE, 2x40GbE, or NOTE1 PMM Modules 8x10GbE ports each Maximum 120Gbps traffic for each PHY Mezzanine Module (PMM) 4x SFP+ for data plane, External I/O Modules & LAN 4x SFP+ and 1x QSFP+ for control plane, Interface 2x GbE for system management Serial Console 2x RS-232 (one with RJ45 port for switch LMP and the other with miniUSB port for ShMC) USB 2x USB 2.0 port connect to switch LMP Up to 2x system storages (2.5" SSD or HDD) and 2x on-board m-SATA storages on the switch board Storage SATA Up to 2x m-SATA M.2 SSD on each CPU blade Cooling Technology Six Rear pluggable, hot swappable fan modules with PICMG compliant fan speed control Up to four redundant power supply units with separate AC inlets. AC Input AC 200~240V, 50~60Hz, with 2+2 and N+1 power redundancy options (max output 3600W) AC 100~127V, 50~60Hz, with N+1 power redundancy (max output 3000W) Up to four redundant power supply units with separate DC inlets. DC Input DC -40V - -60V, 55A, with 2+2 and N+1 power redundancy options (max output 3600W) Power PSU cooling Self cooled Output DC voltage +12V Maximum 148A@ +12V per PSU Output Current rating Maximum 2A@ +12VSB per PSU 3100W (with configuration: 12x CPU blades with 4x 2133MHz 16GB DDR4 memory and 2x M.2 SSD each Power Consumption blade, 6x single port 100GbE PMMs) All product specifications are subject to change without notice Last updated : 8-Jun-2016 PAC-4010 Specifications (Cont.) BMC ARM 9 based controller (400MHz) IPMI IPMI 2.0 based on Advantech IPMI Core Shelf management Interfaces RMCP, SSH, SNMP, CLI, and serial interfaces Sensors FRU presence, fan health, PSU health, temperatures, input voltages Front CPU blades, PMMs, 2.5" SSDs or HDDs Accessibility Rear Fan modules, AC or DC PSU’s Dimensions (H x W x D) 4U x 19" x 686 mm Physical Characteristics Weight 63kg (system weight with full configuration (including 12x CPU blades and 6x PMMs)) Operating Non-operating Temperature 0 ~ 40° C (32 ~ 104° F) - 40 ~ 70° C (-40 ~ 158° F) Environment Humidity 50% @ 25°C to 95% @ 40°C (non condensing) 95% @ 60° C (non-condensing) Altitude Up to 13000ft @ 45°C Acoustic 61.3dB(A) (Idle mode) PICMG IPMI, HPM.1 firmware upgrade, HPM.2 extended message size Compliance CB report (IEC60950-1), CE mark (EN60950-1), UL60950-1/CSAC22.2 Safety & EMC FCC47 CFR Part15, Class A, CE Mark (EN55022/EN55024), RCM Mark (AS/NZS CISPR 22), VCCI, KCC Dimensions Top View Rear View 1 2 Front View 482.60 482.60 430 3 482.60 430 430 5 1. Hot swappable FAN module 2. AC/DC or DC/DC PSU 3. CPU blade (MIC-8301) 4 449.60 4. PMM (PMM-4100) 449.60 449.60 5. LCM module Ordering Information Chassis FRU List Part Number Description Model Series Description 4U, 12x processor blade slots with 4x 1800W PSUs, 4U, 12x processor blade slots with 4x 1800W AC PSUs, PAC-4010-BTO 6x fan modules, optional processor blades and PMMs PAC-4010SC2-P1AE N+1 power redundancy, 6x fan modules, w/o processor blades and PMMs 4U, 12x processor blade slots with 4x 1800W AC PSUs, Related Products PAC-4010SC2-P2AE 2+2 power redundancy, 6x fan modules, w/o processor blades and PMMs Model Series Configuration 4U, 12x processor blade slots with 4x 1800W DC PSUs, ® ® Advantech Single socket CPU Blade with Intel Xeon MIC-8301 PAC-4010SC2-P1DE N+1 power redundancy, 6x fan modules, w/o processor Processor E5 series blades and PMMs PMM-2400 8 port 10GbE PHY Mezzanine Modules (PMM) 4U, 12x processor blade slots with 4x 1800W DC PSUs, PMM-4100 Single port 100GbE PMM PAC-4010SC2-P2DE 2+2 power redundancy, 6x fan modules, w/o processor PMM-3200 2 port 40GbE PMM blades and PMMs PMM-3201 3 port 40GbE PMM PAC-4010SF1-00E PAC-4010 fan module PAC-4010SP1-ACE Power supply AC 1800W for PAC-4010 Power supply DC 1800W with 3m 6AWG DC power cable PAC-4010SP1-DCE for PAC-4010 NOTE 1: Please contact your local Advantech sales representative for more information MIC-8301S-000E Filler panel for PAC-4010 processor blade slot of CPU blades and PMMs. PMM-0000-AD0000E Filler panel for PAC-4010 PMM slot Online Download www.advantech.com/products 686.65 686.65 686.65 177.20 177.20 177.20

Frequently asked questions

IPC Station' parent company, GID Industrial, specializes in procuring industrial parts. We have years of experience finding rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. It is possible for some parts to be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have our own accounts, but we can also use yours if you would prefer. However, we can use other carriers if it will be more convenient for you.

IPC Station will definitely serve you. In fact, much of our business is international, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by IPC Station. We can also accept wire transfers and PayPal, or a check if you're in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products