ADVANTECH MIC-3398

Description
The MIC-3398 is a Low-Power 6U CompactPCI® CPU blade with best in class price/performance ratio tailored for applications that require a state of the art processor platform based on Intel Architecture with full IO capability at an attractive cost point.
The MIC-3398 supports Intel® Atom™ E3845 and Celeron N2930, J1900 SoC (system on a chip) family previously codenamed Bay trail with a maximum of quad-core 2.00 GHz processing performance.
Intel's latest Atom™ technology provides significant increases in performance and energy efficiency by using the latest 22nm Intel manufacturing process making it an ideal choice for control and workstation applications that require passive cooling with a power dissipation as low as 10W for the MIC-3398 board.
Up to 8GB, dual channel 1333 MHz DDR3L memory with ECC support provide a high performance and robust memory interface for demanding applications. With built-in graphics based on Intel's® HD Graphics Technology this blade offers a significant improvement in graphics performance compared to previous generation platforms. Support for an onboard 2.5" SATA-II drive as well as CFast SSDs adds comprehensive mass storage support.
On the system side, the MIC-3398 supports 32-bit, 33MHz and 64-bit, 66MHz PCI bus interfaces to a CompactPCI backplane with support for Drone Mode operation.
A rich set of I/O interfaces such as DVI-D, USB3.0/2.0, Gigabit Ethernet and RS-232/422/485 ports round off the feature set. In addition to the single slot wide (4HP) board offering, a dual slot wide (8HP) version of the blade offers additional network connectivity by increasing Gigabit Ethernet port count from two to four.
Part Number
MIC-3398
Price
Request Quote
Manufacturer
ADVANTECH
Lead Time
Request Quote
Category
CPCI & VPX Blades & Boards » 6U CompactPCI CPU Boards
Specifications
Categorization Information
Networks & Communications
CPCI & VPX Blades & Boards
6U CompactPCI
CPU Boards
Features
- Supports Intel® Atom™ SoC E38xx, Celeron N2930 and J1900 processors, up to quad-cores at 2 GHz
- Up to 8 GB of 1333MHz DDR3L memory
- 2.5" SATA-II HDD/SSD mounting site
- Comprehensive I/O capabilities: DVI, USB 3.0/USB 2.0, Gigabit Ethernet, Serial Ports, SATA-II/CFas
- 4HP single slot high with dual GbE interfaces or 8HP dual slot high with quad GbE interfaces
- PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant
Datasheet
Extracted Text
® 6U CompactPCI Intel Atom™ Processor MIC-3398 Blade Features ® Supports Intel Atom™ E38xx, Celeron N2930 and J1900 processors, up to quad-core at 2 GHz Up to 8GB of 1333MHz DDR3L memory 2.5" SATA-II HDD/SSD mounting site Comprehensive I/O capabilities: DVI, USB 3.0/USB 2.0, Gigabit Ethernet, Serial Ports, SATA-II/CFast 4HP single slot high with dual GbE interfaces or 8HP dual slot high with quad GbE interfaces PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant Introduction ® The MIC-3398 is a Low-Power 6U CompactPCI CPU blade with best in class price/performance ratio tailored for applications that require a state of the art processor platform based ® on Intel Architecture with full IO capability at an attractive cost point. ® The MIC-3398 supports Intel Atom™ E3845 and Celeron N2930, J1900 SoC (system on a chip) family previously codenamed Bay trail with a maximum of quad-core 2.00 GHz processing performance. ® ® Intel Atom™ technology provides significant increases in performance and energy efficiency by using the 22nm Intel manufacturing process making it an ideal choice for control and workstation applications that require passive cooling with a power dissipation as low as 10W. Up to 8GB, dual channel 1333 MHz DDR3L memory with ECC support provide a high performance and robust memory interface for demanding applications. With built-in graphics ® based on Intel HD Graphics Technology this blade offers a significant improvement in graphics performance compared to previous generation platforms. Support for an onboard 2.5” SATA-II drive as well as CFast SSDs adds comprehensive mass storage support. On the system side, the MIC-3398 supports 32-bit, 33MHz and 64-bit, 66MHz PCI bus interfaces to a CompactPCI backplane. A rich set of I/O interfaces such as DVI-D, USB3.0/2.0, Gigabit Ethernet and RS-232/422/485 ports round off the feature set. In addition to the single slot wide (4HP) board offering, a dual slot wide (8HP) version of the blade offers additional network connectivity by increasing Gigabit Ethernet port count from two to four. Specifications ® CPU Intel Atom™TM SoC (22nm) E38xx and Celeron N2930 and J1900, up to quad core 2.00 GHz Processor System BIOS AMI 8MByte SPI flash J1 Connector 32-bit PCI local bus CompactPCI Interface J2 Connector 64-bit PCI local bus Technology DDR3L 1333 MHz, dual channel without ECC support Memory Max. Capacity Up to 8GB Socket SODIMM x2 ® Controller Intel Gen 7 Graphics Engines and media encode/decode engine; GPU Frequency 750MHz Graphic VRAM Shared memory up to 224 MB SDRAM Resolution High resolution display up to 2560 x 1600 @ 60Hz ® Controller 2 or 4 Intel I210AT single-port Gigabit Ethernet controllers (on PCIe x1 channel) Ethernet Interface 10/100/1000Base-T Ethernet I/O Connector 2 RJ45 (4HP), 4 RJ45 (8HP) Onboard HDD/SSD 1 2.5" mounting site (SATA-II) Storage Channels 1 CFast socket (SATA-II) USB3.0 1 type A USB2.0 3 type A DVI-D 1 COM 2 RS232/422/485 on D-Sub-9 Front I/O 2 10/100/1000 Mbps on RJ45 (4HP) LAN 4 10/100/1000 Mbps on RJ45 (8HP) Front Panel LEDs 1x yellow for HDD, x1 green for Master/Drone mode, and x1 green for Power Buttons CPU reset button and power button Hardware Monitor HWM NCT7904 CPCI Boards & Enclosures All product specifications are subject to change without notice. Last updated: 21-Jun-2017 MIC-3398 Specifications (Cont.) Operating System Compatibility Win7/WES7, Win8/WES8, Linux, VxWorks 6.x(on request) CPU J1900 E3845 Voltage +3.3 V +5 V +3.3 V +5 V Power Requirement Current 0.02 A 3.91 A 0.02 A 4.02 A Maximum 0.07 W 20.41 W 0.07 W 20.94 W Physical Dimension (W x D) 233.35 x 160.0 mm Operating Non-operating Temperature 0 ~ 55° C (32 ~ 122° F) -40 ~ 85° C (-40 ~ 185° F) Humidity 95 % @ 40° C, non-condensing 95 % @ 60° C, non-condensing Environment Vibration (5-500 Hz) 2 Grms (without on-board 2.5" SATA HDD) 3.5 Grms Shock 10G 11ms Altitude 15000ft, 55° C, above sea level 40000 ft, -40° C, above sea level Regulatory Conformance FCC Class A, CE, RoHS Compliance Standards PICMG2.0 R3.0, PICMG2.1 R.0, PICMG2.9 R1.0 Ordering Information Front I/O Main On-board Features System Board USB3.0 USB2.0 Ethernet Console Installed ECC CFast Storage SODIMM Front Model Number DVI-D CPU (type A) (type A) (RJ45) (D-Sub9) SODIMM Support Socket Channel Sockets Panel MIC-3398A-M2E 1 1 3 2 2 J1900 1x 2GB No 1 1 SATA II 2 4HP MIC-3398B-M4E 1 1 3 4 2 J1900 1x 4GB No 1 1 SATA II 2 8HP For availability of other configurations please contact your Advantech representative. CPU Configuration ® Intel CPU Model Number # Cores Freq. Turbo Freq. Cache CPU TDP ECC E3845 4 1.91 GHz Na 2 MB 10 W Yes N2930 4 1.83 GHz 2.16 GHz 2 MB 7. 5 W Yes J1900 4 2.00 GHz 2.42 GHz 2 MB 10 W No MIC-3398x-MxE Series 2.5" HDD/SSD 2x D-Sub9 mounting site pin Consoles 4x GbE 2x GbE RJ45 ports RJ45 ports SODIMM sockets 1x USB 3.0 Passive 3 x USB 2.0 CPU Heatsink 1x DVI-D One CFast socket Online Download www.advantech.com/products
Frequently asked questions
Why choose IPC Station?

What is IPC Station' warranty policy for the MIC-3398?

What carriers does IPC Station use to ship parts?

Does IPC Station sell to international (non-USA) customers?

What methods of payment does IPC Station accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Using Intel®'s 2nd and 3rd generation Core™ i3/i5/i7 processors based on 32nm and 22nm process techn...

Using Intel®'s 2nd and 3rd generation Core™ i3/i5/i7 processors based on 32nm and 22nm process techn...

Using Intel®'s 2nd and 3rd generation Core™ i3/i5/i7 processors based on 32nm and 22nm process techn...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods