® ® 6U CompactPCI Quad Core Intel Xeon ® ® Processor E3 & Dual Core Intel Pentium MIC-3397 Processor Blade Features ® ® ® ƒ Supports 22nm Intel Xeon & Pentium low voltage processor ® ƒ Intel DH8900 chipset supports DM1.0 x 4 ƒ Up to 16GB DDR3-1333/1600 ECC memory ƒ Optional extension module on 8HP version supports high-end discrete graphics, up to four display output ports ƒ Supports up to five GbE ports, six USB2.0 ports, two VGA ports,three COM ports, one PS/2 connector, three 2.5" SATA connector (one SATA HDD is optional with 8GB NAND flash), one Cfast, one PCIe 2.0x4 interface to the Rear Transition Module (RTM) ƒ PICMG2.0 R3.0, PICMG2.1 R.0, PICMG2.16 R1.0 Compliant Introduction ® ® Advantech’s MIC-3397 is a 6U CompactPCI single board computer with a choice of server class or low power processors based on the Quad-Core Intel Xeon E3-1125C v2(40W) ® ® ® or Dual-Core Intel Pentium B925C(15W), with DH8900 chipset. The processor is based on Intel 22nm 64 bit process technology, with up to 2.5GHz clock speeds 8MB L3 cache, ® Intel Hyper-Threading, Virtualization, and Trusted Execution Technology, all of which enable the board for applications requiring higher levels of performance and security. The MIC-3397 supports dual channel ECC memory, up to 16GB DDR3 at 1333/1600MHz with max 8GB on board and 8GB SO-DIMM memory, three 2.5” Serial ATA interfaces (one on board optional with one 8 GB NAND flash, two to RTM),one Cfast slot, five Gigabit Ethernet ports (two on front panel, two to PCIMG2.16, two to RTM with one optional on the front panel), six USB2.0 ports (three on front panel, three to RTM), two VGA ports (one on front panel, one to RTM) on the 4HP model, three COM ports (one to front panel, two to RTM), one PS/2 port, and one PCIe2.0 x4 interface reserved for user define extensions on the rear transition module. The MIC-3397, is designed in single slot (4HP) and dual slots (8HP) form factor. The 8HP version provides extensive & rich IO support, and features high-performance discrete graphics, using an AMD Radeon E8860 GPU, supports 2GB GDDR5 at PCIe x1, x2, x4, x8, and x16 lane widths, 2.5 GT/s and 5.0 GT/s link-data rates, up to four display outputs including one DVI-I, one DVI-D port and two DP 1.1or 1.2 port in a MXM 3.0 type A form factor. MIC-3397 Series can be installed in a standard CompactPCI system slot as system master, or peripheral slot as stand-alone server blade without CompactPCI bus communication, it meets the needs of applications operating in harsh enviroments and is ideally suited for datacom, telecom and military applications. Its outstanding graphics capabilities make it a good choice for image-processing in medical, defense system and many other vertical segments applications. Specifications ® ® Quad-Core Intel Xeon Processor E3-1125C v2; CPU ® ® Dual-Core Intel Pentium Processor B925C Max Speed Up to 8MB L3 Cache, 2.5 GHz Processor System ® Chipset Intel DH8900 PCH (Cave creek) BIOS Redundant AMI 8 MByte SPI flash Technology Dual Channel DDR3 1333/1600 MHz with ECC Memory Max. Capacity 8GB on board Socket SO-DIMM x1, up to 8GB J1 ~ J2 Connectors 64bit/66MHz PCI local bus J3 Connector PICMG2.16 + RTM Compact PCI Interface J5 Connector RTM Bridge Pericom PI7C9X130DNDE Mode System Master/Drone PHY 4 Marvel l 88E1112-C2-NNC1I000 Gigabit Ethernet PHY Interface SGMII, 10/100/1000 Base TX Ethernet I/O Connector PICMG2.16 x 2 to J3, RTM x2 or RJ45 x1 to front Ethernet ® Controller Intel WGI210AT SLJXR Gigabit Ethernet Controller Interface PCIe 1.0x1, 10/100/1000 Base TX Ethernet I/O Connector RJ45 x1 to front Controller SM750GX160000-AC ,265P, 16Mbytes of embedded 32-bit DDR memory Dual display: 1360 x 768 (Clone & extended mode) Resolution Single display:1920 x 1080 (16bit, clone mode only) Controller (on MIC-3314) AMD Radeon E8860, 128-bit wide, 2 GB, GDDR5 Graphics Resolution DP: 3840 x 2160; Dual Link DVI-D: 2560 x 1600; Single Link DVI-I: 1920 x 1080 Max up to 4 multidisplays:(Clone mode/extended): Multi-display Config 1:1xDP+1xDP+1xDVI-D+1xDVI-I Config 2: 1xDP+1xDP+1xDVI-D+1xVGA Mode SATA-II 1 channel to on board SATA carrier or on board NAND flash Storage Channels 1 channel to on board cfast socket 2 channels to RTM CPCI Boards & Enclosures All product specifications are subject to change without notice. Last updated: 21-Jun-2017 MIC-3397 Specifications (Cont.) USB2.0 3 type A COM 1 RS232/422 on RJ45 LAN 2 10/100/1000Mbps on RJ45 Front I/O 1 VGA port on 4HP Graphics 2 DP port, 1 DVI-D and 1 DVI-I port on extension board Front Panel LEDs x1 blue/yellow for Hot Swap/HDD, x1 green for Power, and x1 green for Master/Drone mode Buttons System reset button USB2.0 3 ports COM 2 RS232/422/485 on RJ45 or DB9 LAN PICMG2.16 x2 to J3, RTM x2 (1 mux to front) To RTM SATA 2 ports PCIe PCIe2.0 x4 Graphics 1 VGA port Others PS/2 for KB & Mouse BIOS Boot Options SATA,USB port, USB disk, network (PXE) Output Local reset & interrupt Watchdog Timer Interval Programmable 1s ~ 255s Hardware Monitor Controller NCT6776D Operating System Compatibility Windows7, Windows7 Embedded, Linux 4HP:80W (MIC-3397) Power Requirement TDP (max./typ.) 8HP:115W (MIC-3397 + MIC-3314) 6U/1 slot width (4HP): 233.35 x 160 x 20 mm (9.2" x 6.3" x 0.8") Physical Dimension & Weight 6U/2 slot width (8HP): 233.35 x 160 x 40 mm (9.2" x 6.3" x 1.6") Operating Non-operating Temperature 0 ~ 55° C (32 ~ 122° F) -40 ~ 85° C (-40 ~ 185° F) Humidity 95 % @ 40° C, non-condensing 95 % @ 60° C, non-condensing Environment 2.0G Grms (Single slot, without on-board 2.5" SATA HDD) Vibration 2Grms 1.06 Grms (Dual slot, without on-board 2.5" SATA HDD) Shock 10G (Without on-board 2.5" SATA HDD) 30G (Single slot, without on-board 2.5" SATA HDD) Altitude 15000 feet above sea level 40000 feet above sea level Conformance FCC Class A, CE, RoHS Regulatory NEBS Level 3 Designed to meet GR-63-Core and GR-1089-Core Compliance Standards PICMG2.0 R3.0, PICMG2.1 R.0, PICMG2.16 R1.0, Supported CPU Configurations ® Intel CPU Model Number # Cores Freq. Cache Memory Types CPU TDP ® ® Intel Pentium Processor B925C 2 2.0GHz 4 MB L3 Cache DDR3/3-1333 15W ® ® Intel Xeon Processor E3-1125C v2 4 2.5GHz 8 MB L3 Cache DDR3/3-1333/1600 40W Ordering Information Front panel On board Features CPU Board CPU COM Memory SO-DIMM SATA HDD Cfast Slot LAN (1) USB VGA DVI DP Conn. (RJ45) (2) (Up to 8GB) (3) (Up to 8G)(4) Socket Socket Width MIC-3397A2-M8E 2 1 3 1 NA NA Pentium B925C 8 GB NA 1 1 1 J3/J5 ® MIC-3397C2-M8E 2 1 3 1 NA NA Xeon E3-1125C v2 8 GB 1 1 1 1 J3/J5 ® MIC-3397C1-M8E 2 1 3 1 2 2 Xeon E3-1125C v2 8 GB 1 1 1 2 J3/J5 Note: 1. LAN2 on front is switchable with RIO LAN1 which can be set in BIOS 2. COM support RS232/422 mode only 3. Total memory capacity is up to 16GB, 8GB on board, 8GB on SO-DIMM 4. Pentium B925C SKU w/o SO-DIMM socket Recommended Configurations CPU board Extension Module Rear I/O Board MIC-3397x-MxE Series MIC-3314 RIO-3317-XXX DVI-D MIC-3397 4HP MIC-3314 MIC-3397 + MIC-3314 Two DP DVI-I One CFast socket & VGA COM HDD mounting site Three USB2.0 One SO-DIMM socket Two Gigabit LAN Online Download www.advantech.com/products