Part Number | MIC-3396MIL |
---|---|
Manufacturer | ADVANTECH |
Category | CPCI & VPX Blades & Boards » 6U CompactPCI CPU Boards |
Price | Request Quote |
Lead Time | Request Quote |
MIC-3396MIL is specially design for ruggedized application, which offers three different configurations that meet a wide range of environment requirements.
Using Intel's 4th and 5th generation core i5/i7 and Xeon processors, it supports up to four cores / eight threads at 2.7GHz and 6MB last level cache. Ruggedized requirements are addressed by a condition cooled design an extended operation temperature range (-40 ~ 85° C measured at wedge lock). Shock and vibration resistances of the board are increased by using wedge locks and a single-piece CNC-milled aluminum alloy plate that conforms to the major IC packages.
With highly integrated functional capabilities, the MIC-3396MIL fully utilizes the I/O features of the Intel chipsets. It supports maximum 16GB of 1600 MHz DDR3L RAM, an onboard 2.5" Serial ATA HDD or SSD, a CFast slot, an onboard NAND flash (as optional), one PCIex16 and a set of I/O functions brought through the backplane to a unique rear transition module, which contains eight GPIOs, two USB 2.0 and four RS-232/422/485 console ports as pin headers, two SATA Gen III and two SATA Gen II as connectors, two/four LAN ports (two LAN ports are switchable form front panel to RTM), two DVI ports, two USB 3.0, one PCIex16, one P/S2 port and one RS-232/422/485 port on the front panel.
Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.
Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.
Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.
Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.
Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.
Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.
After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.
IPC Station is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.
Do you need a MIC-3396MIL? We can help you find it at a competitive price!
Categorization Information | Networks & Communications CPCI & VPX Blades & Boards 6U CompactPCI CPU Boards |
---|
Download "7d7dc38d-8ad2-4b8a-a2ef-437650a3f495.pdf" (442 KiB)
6U CompactPCI 4th/5th Generation ® Intel Core™ i5/i7 Processor Blade with MIC-3396MIL ECC support Features ® ® Supports 4th /5th Generation Intel Core™ i5/i7 processors and Intel QM87 PCH with embedded graphic (up to 3independent displays) Up to 16 GB (DDR3 1600) low voltage ECC memory (max 8GB on board, socket SO-UDIMM x1, max 8GB) Optimized single-slot SBC with 2.5" SATA-III HDD/CFast socket/ on-board flash (optional) Two SATAIII and two SATAII ports, two USB 3.0, four USB 2.0 ports, two DVI ports, four RS-232 ports, one PS/2 connector, and PCIe x16 interfaces to the Rear Transition Module (RTM) Four gigabit Ethernet ports for PICMG 2.16, front and rear connectivity PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant RoHS COMPLIANT 2002/95/EC Introduction The MIC-3396MIL is specially design for ruggedized applications, and offers three different configurations that meet a wide range of environment requirements. ® ® ® Using 4th and 5th generation Intel Core™ i5/i7 and Intel Xeon processors, it supports up to four cores / eight threads at 2.7GHz and 6MB last level cache. Ruggedized requirements are addressed by a conduction cooled design an extended operation temperature range (-40 ~ 85° C measured at wedge lock). Shock and vibration resistances of the board are increased by using wedge locks and a single-piece CNC-milled aluminum alloy plate that conforms to the major IC packages. ® With highly integrated functional capabilities, the MIC-3396MIL fully utilizes the I/O features of the Intel chipsets. It supports maximum 16GB of 1600 MHz DDR3L RAM, an onboard 2.5" Serial ATA HDD or SSD, a CFast slot, for an onboard NAND flash (as optional), one PCIex16 and a set of I/O functions brought through the backplane to a unique rear transition module, which contains eight GPIOs, two USB 2.0 and four RS-232/422/485 console ports as pin headers, two SATA Gen III and two SATA Gen II as connectors, two/four LAN ports (two LAN ports are switchable form front panel to RTM), two DVI ports, two USB 3.0, one PCIex16, one P/S2 port and one RS-232/422/485 port on the front panel. Specifications ® ® CPU 4th/5th Generation Intel Core™ i5/i7 mobile and Xeon processors up to 2.7 GHz (6MB LLC ) ® Processor System Platform Controller Hub Intel QM87 BIOS Redundant AMI 8MByte SPI flash J1 Connector 32-bit PCI local bus J2 Connector 64-bit PCI local bus CompactPCI Interface J3 Connector PICMG2.16 + RTM area J4~J5 Connectors RTM area Technology DDR3L 1600 MHz, dual channel with low voltage and ECC support Memory Max. Capacity Up to 16GB (max. 8GB on-board, max. 8GB SODIMM) Socket SODIMM x1 ® Controller Intel embedded graphic controller (triple independent display) Graphic VRAM Dynamic Resolution Up to 2048 x 1536, 64k colors at 75Hz ® Controller 1 Intel I350 four-ports Gigabit Ethernet controllers (on PCIe x4 channel) Ethernet Interface 10/100/1000Base-TX Ethernet I/O Connector PICMG 2.16 and RJ-45 x2 (switchable from front panel to RTM) Onboard HDD/SSD 1 2.5" (SATA-III) Channels Onboard SATA-III connector Onboard Flash SATA-III 1 CFast socket (SATA-II) Storage Channels 1 soldered SSD (SATA-II optional) RTM SATA-III and SATA-II 2 SATA-III connectors Channels 2x SATA-II connectors USB3.0 2 type A USB2.0 2 type A VGA 1 DVI-D 1 Front I/O COM 1 RS232 D-Sub9 LAN 2 10/100/1000 Mbps on RJ45 x1 blue for Hot Swap, 1x yellow for HDD, x1 green for Master/Drone mode, x1 green BMC Heartbeat, Front Panel LEDs and x1 green for Power Buttons CPU reset button and BMC reset button CPCI Boards & Enclosures All product specifications are subject to change without notice. Last updated: 21-Jun-2017 MIC-3396MIL Specifications (Cont.) USB2.0 4 ports USB3.0 1 port COM 4 ports (1x on front panel, 3x as pin headers) LAN 4 ports (2x PICMG 2.16, 2x GbE switchable from front panel) Rear I/O SATA 2 SATA-III and 2 SATA-II PCIe 1 PCIex16 Gen3 7GT/s Display 1 DVI-I and 1 DVI-D Others PS/2 for keyboard & mouse Output Local Rest and Interrupt Watchdog Timer Interval Programmable 1s ~ 255s Hardware Monitor HWM NCT7904 BMC Controller LPC1768, IPMI v2.0 compliant Operating System Compatibility Win7/8.1/10, Linux, VxWorks 6.x (on request) Configuration 4HP Power Requirement TDP (estimate) Maximum: up to 80W (quad core), 50W (dual core) or less, depending on CPU type Physical Dimension (W x D) 233.35 x 160.0 mm Operating Non-operating Temperature -40 ~ 85° C (measured at wedge lock) -50 ~ 100° C (measured at wedge lock ) Humidity 95 % @ 40° C, non-condensing 95 % @ 60° C, non-condensing Environment Vibration (5-500 Hz) 3.5Grms (without on-board 2.5" SATA HDD) Bump 25G, 6ms Altitude 15000ft, 55° C, above sea level 40000 ft, -40° C, above sea level Regulatory Conformance FCC Class A, CE, RoHS, CCC Compliance Standards PICMG2.0 R3.0, PICMG2.1 R.0, PICMG2.9 R1.0, PICMG2.16 R1.0, Ordering Information Front Panel Main On-board Features Other System Board Model USB3.0 USB2.0 Ethernet Console Conduction Onboard CFast Storage SODIMM Number VGA CPU Coating (type A) (type A) (RJ45) (RJ45) Cool Memory Socket Channel Socket MIC-3396MILS-P8E 1 2 2 2 1 - I5-4402E DDR3L-8GB 1 1 SATA-III 1 - MIC-3396MILS1-P8E 1 2 2 2 1 - I7-5850EQ DDR3L-8GB 1 1 SATA-III 1 - MIC-3396MILB-P8E* - - - - - Available I5-4402E DDR3L-8GB 1 - - Yes Note: For CPU, on-board memory and other feature availability request, please connect your local sales office. * Bare board w. CPU and on-board memory w/o conduction cool Rear Panel On-board Header / Socket / Connector Part Number LAN PS/2* COM (RJ45) USB 3.0 DVI-D VGA Audio USB 2.0 COM SATA Slot Width Conn. RIO-3396MIL-A1E 4 1 1* 2 1 1 1 2 (4 ports) 4* 4 1 J1, J3, J4, J5 *Note: One PS/2 port carries the signals for keyboard and mouse. Y cable is included. There are four RS-232/485/422 ports max, including from rear panel and on-board header. CPU Information Graphic CPU Type # of Core # of Thread DMI Frequency Turbo Frequency Cache TDP Graphics PCIe Frequency I5-4402E 2 4 5 GT 1.6 GHz 2.7 GHz 3 MB 25W HD4600 400-900MHz Gen 3 I7-5700EQ 4 8 5 GT 2.6 GHz 3.4 GHz 6 MB 47W GT2 300MHz-1GHz Gen 3 I7-5850EQ 4 8 5 GT 2.7 GHz 3.4 GHz 6 MB 47W GT3e 300MHz-1GHz Gen 3 E3-1258Lv4 4 8 5 GT 1.8 GHz 3.2 GHz 6 MB 47W GT2 700MHz-1GHz Gen 3 E3-1278Lv4 4 8 5 GT 2 GHz 3.3 GHz 6 MB 47W GT3e 800MHz-1GHz Gen 3 Related Products Model number Configuration RTM Module with 4 LAN ports, USB3.0/2.0, DVI, PS2 and COM RIO-3396MIL-A1E ports for MIC-3396MIL MIC-3396MIL-1960E Conduction Cool cold blade metal parts for MIC-3396MILN-P8E MIC-3396MIL-1961E Semi cold blade metal parts for air cool MIC-3396MIL MIC-3396MIL-PxE Series One CFast Socket / HDD mounting site 2x DB9 COM ports 2x GbE RJ45 ports PCH On-board memory 2x USB 3.0 Memory 2x USB 2.0 SODIMM socket DVI port One passive CPU CPU heatsink Online Download www.advantech.com/products
Any product names, logos, brands, and other trademarks or media featured or referred to on IPC Station are the property of their respective owners.
GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.
All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.