EKI-5624P 4FE with PoE+2GE Industry Ethernet EKI-5624PI Proview PoE Switch Features ƒ Four Fast Ethernet ports comply with IEEE 802.3af/at ƒ PoE standard and Two Gigabit Ethernet ports ƒ Communicates with SCADA software via Modbus/TCP ƒ Communicates with NMS (Networking management system) via SNMP ƒ Port-based QoS for deterministic data transmission ƒ -40~65°C operating temperature range (EKI-5624PI) ƒ EMS level 3 protection for extreme outdoor environments ƒ IEEE 802.3az Energy Efficient Ethernet (EEE) ƒ Jumbo Frame Support (Up to 9,216 Bytes) ƒ Supports redundant 12V~24V (9V ~ 36V) power input and P-Fail relay ƒ Loop detection Introduction The EKI-5624P and EKI-5624PI switches support Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment(PSE). Also it is the world’s first convergence switches for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software and SNMP to communicate with the NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT. The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately necessary data over the remaining ports. The switches use the highest quality components, to enable the range to operate in temperatures of between -40 and 75°C along with EMS Level 3 protection to repel electromagnetic interface for industrial resistance. The switches are compliant E-mark for in-vehicle application and surveillance system. Specifications Power Communications ƒ Power Consumption 4.2w (System) ƒ Standard IEEE 802.3af/at, 802.3, 802.3u, 802.3ab, 802.3az, 802.3x, 802.1p ƒ Power Input 12-24 Vdc, (7A-3A) ƒ LAN 10/100BaseT(X),10/100/1000BaseT(X) ƒ Power Budget 60w @ 24v ƒ Transmission Distance Up to 100 m 50w @ 12v ƒ Transmission Speed Up to 1000 Mbps Certification Interface ƒ Safety IEC/EN 60950, UL61010-2-201, e-Mark Comply with ƒ Connectors 4 x 10/100BaseT(X) with PoE + 2 x 10/100/1000 Base *Class 1 Division 2, * IECEx, *ATEX T(X) ƒ EMC CE, FCC, e-Mark 6-pin removable screw terminal (power & relay) ƒ EMI EN 55011/ 55022 Class A, EN 61000-6-4, FCC Part 15 Subpart B Class A LED Indicators ƒ EMS EN 55024/ EN 61000-6-2 ƒ System LED P1, P2, P-Fail, Loop, PoE EN 61000-4-2 (ESD) Level 3 ƒ Port LED status 10/100 BaseT(X) or 10/100/1000Base T(X): LNK /ACT, EN 61000-4-3 (RS) Level 3; Speed, PoE port EN 61000-4-4 (EFT) Level 3 Physical EN 61000-4-5 (Surge) Level 3; EN 61000-4-6 (CS) Level 3 ƒ Enclosure Metal / Aluminum Shell with solid mounting kits EN 61000-4-8 (Magnetic Field) Level 3 ƒ Protection Class IP30 ƒ Shock IEC 60068-2-27 ƒ Installation DIN-Rail and Wall-Mount ƒ Freefall IEC 60068-2-32 ƒ Dimensions (W x H x D) 74 x 152 x 105 mm (2.913 x 5.984 x 4.137) inch ƒ Vibration IEC 60068-2-6 ƒ Patent http://www.advantech.com/legal/patent Environment ƒ Operating Temperature Wide Temp Models: -40 to 75°C (-40 to 167°F) Standard Models: -25 to 60°C (-4 to 140°F) ƒ Storage Temperature -40 ~ 85°C (-40 ~ 185°F) ƒ Relative Humidity 10 ~ 95% (non-condensing) Switch Properties ƒ MAC Address 2K entries ƒ Packet Buffer 1 Mbit ƒ Switching Capacity 4.8 Gbps Industrial Ethernet Soultions All product specifications are subject to change without notice Last updated : 23-Aug-2016 EKI-5624P/PI Dimensions Unit: mm [inch] Ordering Information ƒ EKI-5624P 4 x 10/100BaseT(X) with PoE + 2GE , -25 to 60°C operating temperature ƒ EKI-5624PI 4 x 10/100BaseT(X) with PoE + 2GE , -40 to 65°C operating temperature Online Download www.advantech.com/products