Wireless ConneCtivity WzzardC™ Intelligent Edge Node With SmartMesh IP and Bluetooth LE PRODUCT FEATURES • Ultra low power 802.15.4e SmartMesh IP technology • Communicates with Spectre Network Gateway via highly scalable and reliable wireless mesh networks • Connect to industry standard analog or digital sensors • Wzzard app lets you read or configure the nodes using Android tablets and smart phones • MQTT and JSON IoT protocol to application platform SPECIFICATIONS Wireless Connectivity Where You Need It The Wzzard™ intelligent wireless sensor platform creates a complete, quick and easy connectivity stack between your sensors and your application, on you POWER network or the Internet. The platform uses Intelligent Edge Nodes, a wireless (2) 3.6V 2400 mAH Lithium Thionyl Chloride AA 802.15.4e SmartMesh IP network, to transmit sensor data to the Spectre Internal batteries Network Gateway. The Spectre Network Gateway can connect to the Internet Multiyear based on 1 min sensor sampling and via wired connections or the cellular data networks and communicate with Battery Life reporting application platforms using the MQTT IoT protocol and JSON data formats. Optional External Input Voltage 5.0 VDC +/- 10%, 50mA max, via micro USB MECHANICAL Wzzard Intelligent Edge Nodes accommodate virtually any industry-standard external sensors. The Nodes provide a wide variety of sensor interface options, Physical Connection 3.5 mm terminal blocks including general purpose analog inputs, digital input/output and thermocouple. Analog Input (0 - 5 VDC, 0 – 20 mA, 4 – 20 mA) They can also contain internal sensors like an accelerometer (depending upon Digital Input (0-48 VDC) the model number). All 802.15.4e Wzzard Intelligent Edge Nodes contain an Dgital Input Frequency 1-1K Hz Sensor Inputs Digital Input Counter internal temperature sensor. Integrated Temperature Thermocouple J Type Secure, Reliable and Highly Scalable Wireless Networking Digital Output (0-30 VDC) The Wzzard platform uses mesh networking and time-synchronized channel Velcro with dual lock adhesive hopping to provide up to 99.999% connectivity, even in the most demanding Mounting Holster Mount (optional) RF environments. New nodes may be added at any time, and the SmartMesh IP Weight 150 g (5.28 oz) with batteries installed network will dynamically self-configure as new nodes are added or removed. TECHNOLOGY This is a function of the mesh network itself and does not need to be controlled by the network gateway. Wireless 802.15.4e, SmartMesh IP Protocols MQTT-SN, MQTT, JSON Bluetooth Bluetooth 4.0 Low Energy (LE) Easy Configuration and Installation LED Network Connectivity Configuration of the Wzzard sensor platform is easy via Android smart phones or tablets. Using the Wzzard app, handheld devices can configure the Wzzard ENVIRONMENTAL Intelligent Edge Nodes over their Bluetooth LE connections. The Nodes can be Installation Indoor configured with calibration and scaling information, eng. units, friendly names, Operating Temperature 0 to 65°C (32 to 149°F) geolocation and other descriptive information. Storage Temperature 0 to 70°C (32 to 158°F) Operating Humidity 0 to 95% Non-condensing The platform simplifies physical installation as well. The Wzzard Intelligent Edge WIRELESS SECURITY Nodes can be attached to any surface using Velcro with dual lock adhesive or a Device Authentication holster mount. 128 bit AES-based encryption with multiple keys Message integrity check (MIC) Intelligence at the Network Edge Synchronized key changeovers The Wzzard wireless platform places intelligence at the network edge. The Customized key rotation Wzzard Intelligent Edge Nodes can be configured to communicate data only when specified threshold or alert levels are exceeded. When reporting, they can associate useful information like geolocation, device name and uptime. This eliminates unnecessary network traffic, eases the processing burden on upstream resources, and cuts the cost of cellular data plans when the Gateway is using the cellular data network. Thanks to low-power wireless technology and programmable time synchronization, the Intelligent Edge Nodes can operate for multiple years on battery power. Document – 710-10338-00_WzzardC_R1_4215ds Document – 710-10338-00_WzzardC_R1_4215ds www.bb-smartworx.com WzzardC™ Intelligent Edge Node With SmartMesh IP and Bluetooth LE SENSOR INTERFACE SPECIFICATIONS DIGITAL INPUTS Voltage range 0 – 48 VDC V 0.97 V Maximum IL V 1.8 V Minimum IH Pull up current 32uA Type Sourcing (PNP)/Sinking (NPN) Software selectable input Isolation None RATE/FREQUENCY INPUTS Does a 1 second measurement at each measurement/publish interval Frequency 1-1K Hz (Accuracy + or – 1 Hz) Uses the falling edge or rising edge based on the Invert Enabled setting COUNTER INPUT Actively counts either the falling edge (Invert enabled) or rising edge (Invert disabled) Can use a multiplier to convert to a unit type or count Channels 2 selectable/shared with Digital inputs Rolls over at 999999.9 ANALOG INPUTS Input ranges 0 - 5 VDC, 0 – 20 mA, 4 – 20 mA Resolution 12 bit Input load resistance 100 Mega ohm (0-5VDC), 250 ohm (0 - 20 mA) Voltage: 0.10% of full scale reading, 0.20% max. Accuracy Current: 0.11% of full scale reading, 0.24% max. THERMOCOUPLE INPUT Types Supported J Ranges Supported Type J -210 to +1,200 °C Resolution 0.25 °C Typical +/- 2 °C Accuracy +/- 6 °C over the temperature range of -0 to 65 °C DIGITAL OUTPUTS Voltage range 0 - 30 VDC Output Type Open Drain Output Current Not to be less than 100mA Protection Current Limit Protection Isolation None SMARTMESH IP 802.15.4E RADIO SPECIFICATIONS PARAMETER CONDITIONS MIN TYP MAX UNITS Frequency Band 2,400 2,4835 GHz Number of Channels 15 Channel Separation 5 MHz Channel Clear Frequency Where k = 11 to 25, as defined by IEEE 802.4.15 2405 + 5*(k-11) MHz Modulation IEEE 802.15.4 Direct Sequence Spread Spectrum (DSSS) Raw data rate 250 kbps 25 °C, 50% RH, +2dBi Omni-Directional Antenna, Antenna 2 m above ground Range Indoor 100 m Outdoor 300 m Receiver Sensitivity Packet Data Error Rate (PER) = 1% -93 dBm Receiver Sensitivity PER = 50% -95 dBm Output Power Delivered to a 50 Ω load 8 dBm Document – 710-10338-00_WzzardC_R1_4215ds Document – 710-10338-00_WzzardC_R1_4215ds www.bb-smartworx.com WzzardC™ Intelligent Edge Node With SmartMesh IP and Bluetooth LE BLUETOOTH LE RADIO SPECIFICATIONS NO. CHARACTERISTICS CONDITIONS MIN TYP MAX BT SPEC. UNIT 1 Operation Frequency Range 2402 2480 MHz 2 Channel Spacing 2 Mhz Maximum setting, measured at single ended 50ohm. 4 dBm 3 Output Power Minimum setting, measured at single ended 50ohm. -24 dBm High Gain Mode -93.0 -70 dBm 4 Sensitivity, High Gain Mode Standard Mode -92.5 -70 dBm THIONYL CHLORIDE LITHIUM BATTERIES (2 SUPPLIED WITH PRODUCT) CHARACTERISTICS CONDITIONS Temperature Range -40 to 85°C Nominal Capacity 2.4 Ah Nominal Voltage 3.6 V Diameter 14.5 mm Height 50.5 mm *Potential hazard: Do not recharge, crush, disassemble or heat above 212°F (100°C) ORDERING INFORMATION MODEL NUMBER ANALOG INPUT WCHOLST Walll-mount holster ACCESSORIES PART NUMBER DESCRIPTION ACH2-DBAT-DP003 External Antenna, 2.4 GHz, 2 dBi, Dipole, RP-SMA, hinged, 3.8 dBi ACH2-AT-DP011 Magnetic Mount Antenna, 2.4 GHz, 3.8 dBi APPROVALS AND CERTIFICATIONS CE EN55022 CISPR (EN55022) Class A EN 61000-6-1:2007 Generic immunity standard for residential, commercial and light industrial environments EN 61000-6-3:2006+A1:2011 Emission standard for residential, commercial and light-industrial environments EN61000-4-2 ESD +/- 8kV air, +/- 4kV contact EN61000-4-3 RFI EN61000-4-4 EFT EN61000-4-6 CI FCC/IC FCC Part 15 Class A FCC - Part 15.247 Industry Canada - RSS210 REGULATORY APPROVALS ROHS and WEEE Compliant Document – 710-10338-00_WzzardC_R1_4215ds Document – 710-10338-00_WzzardC_R1_4215ds www.bb-smartworx.com WzzardC™ Intelligent Edge Node With SmartMesh IP and Bluetooth LE MECHANICAL DIAGRAM - WZZARD COMMERCIAL 8 6 5 4 3 2 1 7 92.91 3.66 D D 4.47 .176 6.60 .26 C C 8 7 6 5 4 3 2 1 MECHANICAL DIAGRAM - HOLSTER ACCESSORY 92.91 3.66 33.85 A 8.65 D D 1.33 10.67 .34 DETAIL A .42 4.47 A SCALE 2 : 1 .176 6.60 .26 INSTALLER NOTE: C C KEYHOLE IS SIZED FOR #6 FASTENER. B B 33.85 A 38.10 8.65 1.33 10.67 66.04 .34 DETAIL A .42 1.50 SCALE 2 : 1 2.60 INSTALLER NOTE: KEYHOLE IS SIZED FOR #6 FASTENER. B B 38.10 66.04 1.50 2.60 38.10 38.10 UNLESS OTHERWISE SPECIFIED: NAME DATE 1.50 DIMENSIONS ARE IN INCHES DRAWN TW 10/13/15 UNLESS OTHERWISE SPECIFIED: NAME DATE TOLERANCES: 1.50 TITLE: FRACTIONAL CHECKED ANGULAR: MACH 1 BEND 1 A ENG APPR. A TWO PLACE DECIMAL .010 DRAWN TW 10/13/15 DIMENSIONS ARE IN INCHES THREE PLACE DECIMAL .005 HOLSTER, WZZARD 1 CUSTOMER DRAWING TW 10/14/15 TOLERANCES: INTERPRET GEOMETRIC TITLE: COMMERCIAL CHECKED PROPRIETARY AND CONFIDENTIAL TOLERANCING PER: COMMENTS: FRACTIONAL THE INFORMATION CONTAINED IN THIS MATERIAL SIZE DWG. NO. REV REV. ECN DESCRIPTION BY APP DATE DRAWING IS THE SOLE PROPERTY OF ANGULAR: MACH 1 BEND 1 B&B ELECTRONICS. ANY A A ENG APPR. FINISH REPRODUCTION IN PART OR AS A WHOLE B 230-10339-C 1 TWO PLACE DECIMAL .010 NEXT ASSY USED ON WITHOUT THE WRITTEN PERMISSION OF REVISIONS B+B SMARTWORX IS THREE PLACE DECIMAL .005 HOLSTER, WZZARD PROHIBITED. APPLICATION DO NOT SCALE DRAWING SCALE: 1:2 WEIGHT: SHEET 1 OF 1 Document – 710-10338-00_WzzardC_R1_4215ds Document – 710-10338-00_WzzardC_R1_4215ds 1 8 CUSTOMER DRAWIN 7 G 6 TW 5 4 10/14/15 3 2 1 INTERPRET GEOMETRIC www.bb-smartworx.com COMMERCIAL PROPRIETARY AND CONFIDENTIAL TOLERANCING PER: COMMENTS: THE INFORMATION CONTAINED IN THIS MATERIAL SIZE DWG. NO. REV REV. ECN DESCRIPTION BY APP DATE DRAWING IS THE SOLE PROPERTY OF B&B ELECTRONICS. ANY FINISH REPRODUCTION IN PART OR AS A WHOLE 230-10339-C NEXT ASSY USED ON B 1 WITHOUT THE WRITTEN PERMISSION OF REVISIONS B+B SMARTWORX IS APPLICATION PROHIBITED. DO NOT SCALE DRAWING SCALE: 1:2 WEIGHT: SHEET 1 OF 1 8 7 6 5 4 3 2 1