ROUTERS & GATEWAYS SmartFlex™ LTE ROUTER ... more power, more features, more ideas PRODUCT FEATURES • Powerful CPU and enhanced memory to support high demand customer applications • Extended operational temperature range from -40 °C to +75 °C • 10-60 VDC operated with transient and reverse polarity voltage protection • Flexible Port options, such as 3-port Switch, Ethernet and RS232/422/485 serial ports with isolation • GPS and GLONASS support • MicroSD card holder • Low power consumption mode for solar and battery power applications • Optional industrial grade WiFi • PoE PD, PoE PSE, In/Out, USB Host • Advanced security features 3116 T E N R E T SmartFlex™ LTE ROUTER ... more power, more features, more ideas TM The SmartFlex cellular router provides secure Internet connectivity for devices and LANs via the cellular networks. It can be used to pro- vide automatic wireless failover for wired networks, wireless connectivity for devices in remote locations where cable connections are impractical, and TM wireless connectivity for mobile assets. With upload speeds of up to 50 Mbit/s and download speeds of up to 100 Mbps, the SmartFlex provides ample bandwidth, even for applications that require video. APPLICATIONS ENVIRONMENTAL REMOTE ASSETS MONITORING EMERGENCY SYSTEMS ETH RS232 I/O CELLULAR NETWORK POS TERMINALS ETH RS232 WiFi MANAGEMENT & MONITORING SW PLC ™ SMARTWORX HUB MONITORING OF ETH INDUSTRIAL SYSTEMS MONITORING TOOL I/O ETH RS485 ™ R-SEENET WiFi ETH ETH METER REMOTE ASSETS TRAFIC CONTROL KIOSK SECURITY CONTROL GAMING TERMINALS LEADING THE INDUSTRY TM TM The SmartFlex is designed and manufactured for use in The flexible SmartFlex can be configured to suit any tough environmental conditions. Specifications include wide operat- application. The standard configuration includes 2 Ethernet ports with ing temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 2 independent LANs/IP addresses. The standard configuration also module). It accepts input voltage ranges from 10 V DC to 60 V DC and includes 1 USB host port, 1 microSD card holder, 2 SIM card holders for is equipped with sleep mode for reducing electrical consumption automatic failover to an alternate service provider, 2 binary inputs(I/O) , 1 binary output (I/O) and onboard GPS. An optional built-in WiFi module TM IThe SmartFlex places intelligence out at the network is also available, with industrial grade operating temperature ranges edge with an extremely powerful Cortex A8 CPU at 1GHz, 256 MB flash from -40 to +75 °C (-20 to +60 °C LTE450 module). Further optional memory, 512 MB RAM and 128kB M-RAM, providing full support for LTE boards available: 3x ETH (the router can be configured with up to 5 total (long Term Evolution) speeds and applications. A secure Web interface Ethernet ports and 3 independent LANs/IP addresses) or ETH - RS232 TM allows users to configure and manage the SmartFlex from - RS485 (isolation strenght up to 2.5kV) or RS232 - RS485 (isolation remote locations. The router can also upgrade its configuration and firm- strenght up to 2.5kV) or RS232. TM ware from the operator’s central server, allowing for simultaneous mass The SmartFlex supports real time data encryption and the reconfiguration of every router on the network. Users may insert Linux creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports scripts and they can create multiple configurations for the same router. DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numerous Users may switch from one configuration to another at any time. other functions, as well as additional software like SmartCluster VPN Server and R-SeeNet. 2 | www.advantech-bb.com / Enabling an Intelligent Planet N I www.bb-smartcellular.eu TECHNICAL SPECIFICATION Power, Consumption, Environmental, IP cover Power supply 10 – 60 VDC (2–Way Molex connector) Power consumption – Idle / Average / Peak / Sleep Mode 2.5 W / 4W / 11 W / 10 mW Temperature range – Operating / Storage -40 to +75 °C / -40 to +85 °C -20 to +60 °C / -40 to +85 °C Temperature range LTE450 – Operating / Storage Humidity – Operating / Storage (non condensing) 0 to 95 % / 0 to 95 % Cold Start -35 °C Operating Altitude 2000 m / 70 kPa Ingress Protection Rating IP30 Cellular module parameters SR303 - EMEA Region SR306 - APAC & LATAM SR307 - LTE450 LTE Bit rate 100 Mbps (DL) / 50 Mbps (UL) Bit rate 100 Mbps (DL) / 50 Mbps (UL) Bit rate 100 Mbps (DL) / 50 Mbps (UL) 3GPP release 8 compliant 3GPP release 9 compliant 3GPP release 9 compliant Supported frequencies: Supported frequencies: Supported frequencies: 800/900/1800/2100/2600 MHz 800/900/1800/2100/2600 MHz 450/800/1800/2600 MHz WCDMA Bit rate 42.0 Mbps (DL) / 5.76 Mbps (UL) Bit rate 42.0 Mbps (DL) / 5.76 Mbps (UL) Bit rate 42.0 Mbps (DL) / 5.76 Mbps (UL) Supported frequencies: 900/2100 MHz Supported frequencies: 850/900/1900/2100 MHz Supported frequencies: 900/2100 MHz GPRS/EDGE Bit rate 237 kbps (DL) / 59.2 kbps (UL) Bit rate 236 kbps (DL) / 59.2 kbps (UL) Bit rate 236 kbps (DL) / 59.2 kbps (UL) Supported frequencies: 900/1800/1900 MHz Supported frequencies: 850/900/1800/1900 MHz Supported frequencies: 900/1800 MHz WiFi - 802.11 a/b/g/n, AP or Client modes Supported WiFi band 2.4 GHz, 5.4 GHz Number of clients: 10 Encryption: None, WEP, TKIP, AES Authentication: Open, Shared, WPA–PSK, WPA2–PSK 5 GHz supported channels – 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 2.4 GHz supported channels – 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 Industry Certifications & Approvals Radio for general LTE ETSI EN 301 511 v9.0.2, ETSI EN 301 908–1 v5.2.1, ETSI EN 301 908-2 v5.2.1, ETSI EN 301 908-13 v5.2.1 Radio for LTE450 ETSI EN 301 908-1 v6.2.1, ETSI EN 301 908-13 v6.2.1, ETSI EN 301 489-24 v1.5.1 Emissions/ Immunity IEC 61000-6-2:2005, ETSI EN 301 489-1 v1.9.2, EN 55022:2010 Safety EN 60950-1:06 ed.2 (not Hazardous Locations), EN 62311:2008 Vehicle E8 Environmental RoHS, RoHS2, REACH, WEEE Mechanical Plastic or metal case with plastic or metal DIN rail Enclosure Dimensions 87x30x127mm (150mm including wall month sides) Weight Plast/Metal 170 g/375 g WiFi antenna connector *optional ANT, DIV antenna connector Primary SIM Robust metal or plastic case *optional - RS232, ETH - RS232 - RS485, RS232 - RS485, 3-port SWITCH Secundary SIM GPS antenna connector IN0, IN1, OUT Ethernet 10/100 ports USB Host Power connector SD card slot DIN holder RESET button ™ Router SmartFlex is compatible with: R-SEENET SMARTWORX HUB www.advantech-bb.com | 3 Features Network and Routing DHCP Server, , DHCP Client, NAT/PAT, VRRP, Dynamic DNS client, DNS proxy, VLAN, QoS, NTP Client/ Server, IGMP, BGP, OSPF, RIP, SMTP, SMTPS, SNMP v1/ v2c/ v3, Backup routes, PPP, PPPoE, SSL, Port Forwarding, Host Port Routing, Ethernet Bridging Security HTTPS, SSH, VPN tunnels, SFTP Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering) VPN tunnelling Open VPN client and server and P2P, L2TP, PPTP, GRE, EasyVPN, DMVPN IPSec with IKEv1 and IKEv2 Configuration Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server Backup configuration, Restore configuration Firmware Management Automatic firmware update from server, Locally via LAN and USB or remotely OTA (HTTP, HTTPS), Over-the-Air software updates, Over-the-Air cellular module update from FW Diagnostic One CLICK report – current configuration / factory identification / system log / kernel log / reboot log / routing table, Remote diagnostics possible via SSH Status Network Status, DHCP Status, IPSec Status, Statistics history for last 60 days Log System Log, Reboot Log, Kernel Log Controling and diagnostic SMS, SNMP v1/v2c/v3, Statuses, Log Event Engine StartUp script & Up/Down script (Bash), Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature. Report Types: RAP, SMS, email, SNMP Trap, TCP (csv, xml, binary) Support and Warranty 3 years warranty, Free device software upgrades, Optional warranty extension Other Support of IPv6 Ports, LED, Antennas Up to 5x ETH ports RJ45, 10/100 Mbps SIM 2 Mini SIMs (2FF) (rear panel) LED Indicators PWR, DAT, WAN, ETH, SIM, USR, POE, IN0, IN1, OUT 3x ANT - ANT, DIV, GPS (no for LTE450 model) SMA connectors WiFi antenna - *optional R-SMA connector USB USB Host connector 2.0 I/O 6-Way Molex connector – 2x binary input, 1x binary output SD Card 1x Micro SD Card slot (rear panel) RST RESET button (rear panel) *optional 3-port SWITCH 3x RJ45, 10/100 Mbps *optional ETH - RS232 - RS485 RJ45, 4pin terminal block, 3pin terminal block connectors – Isolation up to 2.5 kV *optional RS232 - RS485 5pin terminal block, 4pin terminal block connectors – Isolation up to 2.5 kV *optional RS232 RJ45 PoE Parameters PoE PD PoE PSE Input voltage range 42.5 – 57 V 44 – 57 V, 65 W Power available 25.50 W 2x 25.50 W (ETH0, ETH1) Maximum current 600 mA Insul. Strenght 1.5 kV from the router none Standards IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) supported. Cabling needed is Category 5, up to 12.5 Ω. It is possible to use a passive PoE injector. Partner: Corporate Headquarters Worldwide Headquarters European Headquarters Czech Office Corporate Headquarters ADVANTECH Oranmore, Co. Galway, Ireland Sokolská 71 707 Dayton Road No. 1, Alley 20, Lane 26, Rueiguang Road 562 04 Ústí nad Orlicí III. Ottawa, IL 61350 USA Neihu District, Taipei 11491 Phone: +353 91 792444 Czech Republic Taiwan, R.O.C Fax: +353 91 792445 Phone: 1-815-433-5100 eSales@advantech-bb.com Phone: +420 465 521 020 Fax: 1-815-433-5109 Phone: 0800-777-111 GSM: +420 603 872 287 orders@advantech-bb.com www.advantech.com Email: cellularsales@advantech-bb.com 3016 www.advantech-bb.com 3116