Dual Port, Wide Temperature Dual Port, Wide Temperature, Managed Media Converter Managed Media Converter IE-iMcV-2xLIM IE-iMcV-2xLIM PRODUCT FEATURES • Functions as two independent copper to fiber media converters, doubling port density in the iMediaChassis and MediaChassis product lines Interchangeable SFP modules allow for multiple fiber type conversion options (single-mode, multi-mode, long haul, short haul, etc.) • 100 Mbps SFPs and 2xLIM modules are hot-swappable; no need to power-down chassis when upgrading or troubleshooting • Link Fault Pass-Through (LFPT) • Config Control ORDERING INFORMATION The IE-iMcV-2xLIM, TX/SFP is a Fast Ethernet module which provides MODEL FIBER ETHERNET ETHERNET two conversions of 100Base-TX twisted pair to 100Base-FX/SX single- FIBER RANGE NUMBER PORTS PORTS CONNECTOR mode or multi-mode fiber. There are two sets of ports, RJ-45 (copper) IE-iMcV-2xLIM * and SFP (fiber). The SFP port supports all MSA and Cisco compliant, SC, 850-18610 SFP 2 Various 2 RJ45 LC and single-strand fiber (SSF), 155 Mbps SFPs. Designed as a Layer * SFP Fiber sold separately 1 device, the IE-iMcV-2xLIM is entirely transparent to both Layer 2 and Layer 3 protocols. The IE-iMcV-2xLIM is SNMP-manageable and can be installed into the modular, SNMP-manageable iMediaChassis or the MediaChassis series. Easily configure and manage converters with the GUI-based iView². As an SNMP management application, iView² gives network managers the ability to monitor and control products. iView² runs standalone on iView: Windows 2000/XP/Vista/Win7 Windows 2000/XP/Vista/Win7 or as a Web Server running under IIS. All product specifications are subject to change without notice. IE-iMcV-2xLIM_1716ds www.advantech-bb.com / Enabling an Intelligent Planet Dual Port, Wide Temperature Managed Media Converter IE-iMcV-2xLIM SPECIFICATIONS TECHNICAL MECHANICAL 4.19”H x 0.78”W x 2.75”D 2 x RJ-45 and 2 x SFP ports (SFPs sold separately) Dimensions (10.74 x 2 x 7.05 cm) IEEE 802.3u 100Base-T over twisted pair Shipping Weight 0.30 lbs (.11 kg) IEEE 802.3u 100Base-FX or SX over twisted pair INPUT VOLTAGE AutoCross for MDI/MDIX 100 to 240 VAC 50/60Hz (External Power Supply) 5 VDC ± 5% LinkLoss, Far End Fault & Auto Negotiation POWER Link Fault Pass-Through (LFPT) Max Current: 0.80A Supports Config Control ENVIRONMENTAL MDI/MDIX switch Operating Temperature: -40° F to +176° F (-40° C to +80° C) DIP Switch selectable Auto Negotiation on copper port Storage Temperature: -40° F to +176° F (-40° C to +80° C) Features low latency 5% to 95% (non-condensing), Operating Humidity Supports Half- and Full-Duplex operation 0 – 10,000 ft. altitude Supports Jumbo packets (No size limit) REGULATORY APPROVALS Install in any iMediaChassis or MediaChassis FCC Class B Supports GUI-Based iView² UL, CSA, CE Includes diagnostic LEDs TUV Hot-swappable architecture STANDARD COMPLIANCE SFP-MSA SFP standard (September 14, 2000) SFF-8472 DDMI standard (Revision 1.0) IEEE 802.3 MECHANICAL DIAGRAM (dimensions in inches & millimeters) .14 .78 3.04 2.73 1.57 4.19 3.57 1.56 .67 1.51 .62 .57 .76 1.08 .68 .31 .12 .13 orders@advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support@advantech-bb.com European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445