Heavy Industrial RS-232 to RS-422/485 Isolated Converter Model 485DRCI-PH www.advantech-bb.com PRODUCT FEATURES • IEEE-61850-3, IEEE-1613 • NEMA TS2 • -40 to 85°C Operating Temperature • Rugged IP30 Metal Panel Mount Case • 50G Shock, 4G Vibration • 2kV Triple Isolation • 10 to 48 VDC Input Power Model 485DRCI-PH is a premium heavy industrial RS-232 to RS-422/485 ORDERING INFORMATION isolated converter. Designed for rugged industrial environments, it has been MODEL NUMBER DESCRIPTION put through some of the most exacting compliance tests in the industry. 485DRCI-PH Heavy Industrial RS-232 to RS-422/485 Isolated Converter Meeting the requirements of IEC 61850-3 and IEEE 1613, it is suitable for installation in electrical substations. These specifications are more stringent than the NEMA TS1/TS2 requirements for transportation applications. ACCESSORIES Powerful isolation on both data ports protects your equipment and data from MDR-40-24 - DIN Rail Mount Power Supply 24VDC, 1.7 A output power damaging ground loops and surges. Additional isolation on the power supply circuits adds a third degree of protection. Packaged in a rugged IP30 metal case, it converts unbalanced, full or half- duplex RS-232 signals to balanced RS-422/485 signals. Featuring Automatic Send Data Control circuitry, it does not require special software control of handshake signals in RS-485 mode. Bit-wise enabled circuitry automatically detects the data rate without setting a DIP switch. All product specifications are subject to change without notice. 485DRCI-PH_2817ds orders@advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support@advantech-bb.com European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 Heavy Industrial RS-232 to RS-422/485 Isolated Converter Model 485DRCI-PH SPECIFICATIONS SERIAL TECHNOLOGY INDICATORS RS-232 TD, RD, GND Power Red LED RS-422 TDA(-), TDB(+), RDA(-), RDB(+) TD / RD (Each Port) Green LED RS-485 4-Wire TDA(-), TDB(+), RDA(-), RDB(+) MECHANICAL 5.2 x 3.7 x 1.3 in RS-485 2-Wire Data A(-), Data B(+) Dimensions 132.4 x 92.9 x 33.0 mm RS-232 Connector DB9 Female (DCE) Enclosure IP30 Metal, Panel Mount RS-422/485 Connector 5 position, removable terminal block Weight 0.46 lbs (208.65 grams) Data Rate 1.2 to 115.2 Kbps MTBF 163611 Hours Isolation 2 KV RMS, 1 minute MTBF Calc. Method Parts Count Reliability Prediction 600W peak power dissipation. Surge Protection ENVIRONMENTAL Clamping time <1 picosecond Industrial Bus Modbus ASCII / RTU Operating Temperature -40 to 85°C (-40 to 176°F) Bias Built-in, switchable 1.2KΩ XMT/RCV Storage Temperature -40 to 85°C (-40 to 176°F) Termination Built-in, switchable 120Ω Operating Humidity 0 to 95% Non-condensing POWER REGULATORY FCC, CE, IEC 61850-3, IEE 1613, Source External Approvals UL C1 D2, File: E245458, NEMA TS2 Power Connector 2 position removable terminal block Input Voltage 10 to 48 VDC (56 VDC m aximum) Power Consumption 0.5 W typical (1.9 W with termination) TERMINAL BLOCKS Wire Size Accepted 28 to 12 AWG, copper wire only. Pitch 5.08 mm Insulation Resistance ≥500 MΩ @ 500 VDC Maximum Torque 5 Kg / cm IEC 61850-3 ELECTRO MAGNETIC INTERFERENCE SPECIFICATIONS TEST DESCRIPTION TEST LEVEL LEVEL Enclosure Contact 8 kV 4 61000-4-2 ESD Enclosure Air 15 kV 4 61000-4-3 Radiated RFI Enclosure Ports 10 V/m 3 Signal Ports 4 kV @ 2.5 Khz ------ 61000-4-4 Burst (Fast Transient) DC Power Ports 4 kV 4 Signal Ports 2 kV line to earth, 1 kV line to line 4 61000-4-5 Surge DC Power Ports 2 kV line to earth, 1 kV line to line 3 Signal Ports 10 V RMS 3 61000-4-6 Induced (Conductive) RFI DC Power Ports 10 V RMS 3 Signal Ports 2.5 kV common, 1 kV diff mode @ 1MHz 3 61000-4-12 Damped Oscillatory DC Power Ports 2.5 kV common, 1 kV diff mode @ 1MHz 3 Signal Ports 30 V Continuous, 300 V for 1 s 4 61000-4-16 Mains Frequency Voltage DC Power Ports 30 V Continuous, 300 V for 1 s 4 61000-4-17 Ripple on DC Power Supply DC Power Ports 10% 3 IEEE 1613 C37.90 ELECTROMAGNETIC INTERFERENCE SPECIFICATIONS TEST DESCRIPTION TEST LEVEL LEVEL Enclosure Contact 8 kV ------ C37.90.3 ESD Enclosure Air 15 kV ------ C37.90.2 Radiated RFI Enclosure Ports 10 v/m ------ Signal Ports 4 kV @ 2.5 kHz ------ C37.90.1 Fast Transient DC Power Ports 4 kV ------ ENVIRONMENTAL SPECIFICATIONS TEST DESCRIPTION TEST LEVEL LEVEL 60068-2-1 Cold Temperature Test Ad (-)40 C, 16 Hours ------ 60068-2-2 Dry Heat Test Bd (+)85 C, 16 Hours ------ 60068-2-30 Humidity (damp heat cycle) Test Dd 90% (non-condensing) (+)55C, 6 Cycles ------ IEC 60068-2-6 Vibration Test Fc 4G Class 2 IEC 60068-2-27 Shock Test Ea 50G Class 2 IEC 60068-2-32 Drop ------ 6 faces, 3 edges, 1 corner total 10 drops at 1 m ------ orders@advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support@advantech-bb.com European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445