Serial Converters, Repeaters and Suppressors/Surge Suppressors

ADVANTECH BB-422HESP

Why buy from GID?

Quality

We are industry veterans who take pride in our work

Protection

Avoid the dangers of risky trading in the gray market

Access

Our network of suppliers is ready and at your disposal

Savings

Maintain legacy systems to prevent costly downtime

Speed

Time is of the essence, and we are respectful of yours

Details

Part Number BB-422HESP
Manufacturer ADVANTECH
Category Serial Converters, Repeaters and Suppressors »  Surge Suppressors
Price Request Quote
Lead Time Request Quote

Description

These three-stage surge protectors meet IEEE 1000-4-5: 1995 and IEEE C62.41-1991 recognized standards for premium surge protectors. It protects against lightning strikes, power surges, and other types of voltage disturbances with three stages of protection for each supported line: a gas discharge tube followed by a series resistor and finally a Transient Voltage Suppresser (TVS). Three RS-422/485 signals on terminal blocks are supported with a clamping voltage of approximately 6.8 Volts.
These surge protectors housed in a tough metal, panel mount case with a protected signal ground connection and dedicated chassis ground lug. In order to work properly, it is important to have a good connection between the #10 screws and a solid earth ground.

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Our Process

Our Process: Preparation
Preparation

Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.

Our Process: Receiving
Receiving

Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.

Our Process: Initial Testing
Initial Testing

Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.

Our Process: Refurbishment
Refurbishment

Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.

Our Process: Repair
Repair

Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.

Our Process: Final Testing
Final Testing

Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.

Our Process: Shipping
Shipping

After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.

Who We Are

IPC Station is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.

Do you need a BB-422HESP? We can help you find it at a competitive price!

Specifications

General Connector Terminal Block
General Interface RS-422 RS-485
General Temperature (Storage) -40~85°C (40~185 °F)
General Humidity 0 ~ 95%, non-condensing
General Temperature (Operating) 0 ~ 70° C (32 ~ 158° F)
Categorization Information Intelligent Connectivity
Industrial Communication
Serial Converters, Repeaters and Suppressors
Surge Suppressors

Features

  • Three stages of protection on every data line: 1) Gas discharge tube 2) Series resistor 3) Transient voltage suppressor
  • Protected signal ground connection
  • Rugged terminal block connections
  • Dedicated chassis ground lug

Datasheet

Download "062e2ed3-567d-4b82-8a59-823cfd56301d.pdf" (359 KiB)

Extracted Text

Three-stage RS-232, RS-422/485 Surge Protectors Models 485HESP, 422HESP, 232HESP www.advantech-bb.com PRODUCT FEATURES •Three stages of protection on every data line 1) Gas discharge tube 2) Series resistor 3) Transient voltage suppressor • Protected signal ground connection • Rugged terminal block connections • Dedicated chassis ground lug These three-stage surge protectors protect against lightning strikes, power ORDERING INFORMATION surges, and other types of voltage disturbances with three stages of protection MODEL NUMBER INTERFACE LINES PROTECTED MOUNTING for each line: a gas discharge tube followed by a series resistor and finally a 485HESP RS-422/485 (3) RS-422/485 Panel Mount Transient Voltage Suppresser (TVS). 422HESP RS-422/485 (5) RS-422/485 Panel Mount 232HESP RS-232 (5) RS-232 Panel Mount The surge protectors housed in a tough metal, panel mount case with a protected signal ground connection and dedicated chassis ground lug.In order to work properly, it is important to have a good connection between the #10 ACCESSORIES screws and a solid earth ground. Two terminal posts and two metal mounting CU15B - Copper Grounding Strap brackets provide a good ground connection. SPECIFICATIONS SERIAL TECHNOLOGY 485HESP Connectors, line 3-position terminal blocks Connectors, equipment 3-position terminal blocks 232HESP/422HESP Connectors, line 5-position terminal blocks Connectors, equipment 5-position terminal blocks Learn More About Surge Suppression & Isolation SURGE SUPPRESSION These informative articles are available at www.advantech-bb.com: Clamping Voltage 72 VDC, minimum • “Isolation: Your Best Investment for Reliability” - stage 1 108 VDC, maximum Series Resistance • “Dataline Isolation Theory” 2.7 Ohms - stage 2 Models 422HESP, 485HESP: • “Dataline Surge Protection” 6.45 VDC, minimum Clamping Voltage 7.14 VDC, maximum - stage 3 Model 232HESP: 14.3 VDC, minimum 15.8 VDC, maximum 9 Clamping Time Less than 5 x10 seconds Dimensions 11.4 x 8.4 x 4.6 cm (4.5 X 3.3 x 1.8 in) Installation In-line Weight 0.19 kg (6.7 oz) ENVIRONMENTAL Operating Temperature 0 to +70 °C (+32 to +185 °F) Storage Temperature -40 to +85 °C (-40 to +185 °F) Operating Humidity 0 to 95% Non-condensing APPROVALS / CERTIFICATIONS - 485HESP 2011/65/EU - Reduction of Hazardous Substance Directive 2012/19/EU - Waste Electrical and Electronic Equipment (WEEE) All product specifications are subject to change without notice. 485HESP, 422HESP, 232HESP_3117ds orders@advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support@advantech-bb.com European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445

Related Products

ADVANTECH
These three-stage surge protectors meet IEEE 1000-4-5: 1995 and IEEE C62.41...
ADVANTECH
Model BB-HESP4DR meets IEEE 1000-4-5: 1995 and IEEE C62.41-1991 recognized...

Disclaimer

Any product names, logos, brands, and other trademarks or media featured or referred to on IPC Station are the property of their respective owners.

GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.

All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.

IPC Station is a GID Industrial website.
GID Industrial Logo
Copyright © 2024 GID Holdings LLC, All Rights Reserved.
Page generated in 0.063 seconds.